Carnegie Library of Pittsburgh locations will be closed Memorial Day, Monday, 5/27.

Tools

Topics & Collections

small text medium text large text

BSI Standards List

<< Return to BSI Standards Listing
Standard
Year
Title
BS 7870:5
1999
LV and MV polymeric insulated cables for use by distribution and generation utilities. Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution
BS 7870:6.1
1999
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations. PVC insulated and PVC sheathed cables
BS 7870:6.2
1999
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations. XLPE or HEPR insulated and PVC sheathed cables
BS 7870:6.3
1999
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations. Cables with thermosetting insulation and non-halogenated
BS 7870:6.3
1999
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations. Cables with thermosetting insulation and non-halogenated
BS 7870:7.1
2003
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations. Single core and 3-core cables
BS 7870:7.2
2003
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations. Single-core and 3-core cables
BS 7870:8.1
2003
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground. Single wire armoured and PVC sheathed multicore cable with copper conductors
BS 7870:8.2
2003
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground. Single wire armoured and PVC sheathed multipair cable with copper conductors
BS 7870:8.3
2003
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground. Single wire armoured and PVC sheathed multicore cable with copper conductors,
BS 7870:8.4
2003
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground. Single wire or double steel tape armoured and PVC sheathed multipair cable wit
BS 7870:8.5
2003
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground. Single wire armoured and unarmoured multicore cables with copper conductors an
BS 7870:8.6
2003
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground. Single wire or double steel tape armoured and non-halogenated sheathed multipa
BS 7871:1
1996
Pneumatic conveying. Glossary of terms
BS 7871:2
1998
Pneumatic conveying. Glossary of equipment
BS 7872
2002
Manned security services. Cash-in-transit services (collection and delivery). Code of practice
BS 7873
1996
Code of practice for application and testing of hot enamel external and/or internal coating of iron and steel pipes
BS 7873
1996
Code of practice for application and testing of hot enamel external and/or internal coating of iron and steel pipes
BS 7874
1998
Method of test for microbiological deterioration of elastomeric seals for joints in pipework and pipelines
BS 7875
1996
Specification for saddle trees made from synthetic materials
BS 7876
1996
Classification of prints
BS 7877
1999
Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers
BS 7878:1
1997
Materials used in communication cables. PVC insulation compounds
BS 7878:2
1997
Materials used in communication cables. PVC sheathing compounds
BS 7878:3
1997
Materials used in communication cables. PE insulation
BS 7878:5
1997
Materials used in communication cables. Polypropylene insulation compounds
BS 7878:6
1997
Materials used in communication cables. Halogen free flame retardant insulation compounds
BS 7878:7
1997
Materials used in communication cables. Halogen free flame retardant thermoplastic sheathing compounds
BS 7878:8
1997
Materials used in communication cables. Filling compounds for filled cables
BS 7879
1997
Sectional specification for equipment cables to be used for digital and analogue communications
BS 7880
1997
Code of practice for draught control of existing doors and windows in housing using draughtstrips
BS 7881
1997
Method of test for petrol filters
BS 7882
1997
Method for calibration and classification of torque measuring devices
BS 7883
2005
Code of practice for application and use of anchor devices conforming to BS EN 795
BS 7884
1997
Specification for copper and copper-cadmium stranded conductors for overhead electric traction and power transmission systems
BS 7885
1997
Code of practice for safe entry into silos
BS 7886
1997
Method of measurement of hydrogen permeation and the determination of hydrogen uptake and transport in metals by an electrochemical technique
BS 7887
1997
Ultrasonics. Real-time pulse-echo systems. Guide for test procedures to determine performance specifications
BS 7888:1
1998
LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um
BS 7888:1
1998
LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um
BS 7888:2
1998
LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um
BS 7888:2
1998
LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um
BS 7888:3
1998
LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um
BS 7888:3
1998
LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um
BS 7888:4.1
1998
Test requirements for MV accessories. Accessories for cables with extruded insulation
BS 7888:4.1
1998
Test requirements for MV accessories. Accessories for cables with extruded insulation
BS 7888:4.2
1998
Test requirements for MV accessories. Accessories for cables with impregnated paper insulation
BS 7888:4.2
1998
Test requirements for MV accessories. Accessories for cables with impregnated paper insulation
BS 7889
1997
Electric cables. Thermosetting insulated, unarmoured cables for a voltage of 600/1000 V
BS 7890
1996
Method for achieving good payment performance in commercial transactions
BS 7892
2000
Specification for seal coats on cement mortar lined ductile iron pipes and fittings
BS 7893
1997
Specification for pressure sensitive adhesive closing and sealing tapes for use with sterilization packaging materials
BS 7894
2003
MV impregnated paper insulated distribution cables of rated voltages of 3.8/6.6 kV to 19/33 kV
BS 7895
1997
Specification for bayonet lampholders with enhanced safety
BS 7897:1
1997
Specification for lac and shellac. Hand-made shellac
BS 7897:2
1997
Specification for lac and shellac. Machine-made shellac
BS 7897:3
1997
Specification for lac and shellac. Bleached lac
BS 7898
1997
Guide to hydrometric data management
BS 7899:2
1999
Code of practice for assessment of hazard to life and health from fire. Guidance on methods for the quantification of hazards to life and health and estimation of time to incapacitation and death in fires
BS 7900
1998
Specification for examination of the surface texture of precision steel castings
BS 7901
2002
Specification for recovery vehicles and vehicle recovery equipment
BS 7903
1997
Guide to selection and use of gully tops and manhole covers for installation within the highway
BS 7904
1998
Guide to smoke measurement units. Their basis and use in smoke opacity test methods
BS 7905:1
2001
Lifting equipment for performance, broadcast and similar applications. Specification for the design and manufacture of above stage equipment (excluding trusses and towers)
BS 7905:2
2000
Lifting equipment for performance, broadcast and similar applications. Specification for design and manufacture of aluminium and steel trusses and towers
BS 7907
1997
Code of practice for the design and manufacture of children's clothing to promote mechanical safety
BS 7908
1999
Packaging. Temperature and time-temperature indicators. Performance specification and reference testing
BS 7909
1998
Code of practice for design and installation of temporary distribution systems delivering a.c. electrical supplies for lighting, technical services and other entertainment related purposes
BS 7910
2005
Guide on methods for assessing the acceptability of flaws in metallic structures
BS 7911
2003
Specification for organizations conducting market research
BS 7912
2001
Power cables with XLPE insulation and metallic sheath, and their accessories, for rated voltages from 66 kV (Um
BS 7913
1998
Guide to the principles of the conservation of historic buildings
BS 7914
1998
Method of test for penetration of erythemally weighted solar ultraviolet radiation through clothing fabrics
BS 7915
1998
Ergonomics of the thermal environment. Guide to design and evaluation of working practices for cold indoor environments
BS 7916
1998
Code of practice for the selection and application of particleboard, oriented strand board (OSB), cement bonded particleboard and wood fibreboards for specific purposes
BS 7917
1999
Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods
BS 7918:1
1999
Visual imperfections in rubber products. Vocabulary
BS 7919
2001
Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments
BS 7920
1998
Specification for luminance meters
BS 7921
1998
Cone top cans of nominal volumes 125 ml to 1000 ml for liquid products. Specification
BS 7924
1999
Code of practice for the repair and overhaul of certified electrical apparatus intended for use in mines susceptible to firedamp
BS 7925:1
1998
Software testing. Vocabulary
BS 7925:2
1998
Software testing. Software component testing
BS 7927
1998
Heating appliances for domestic applications. Portable apparatus designed to detect and measure specific combustion flue gas products. Requirements
BS 7928
1998
Specification for head protectors for cricketers
BS 7931
1998
Secure carriage of parcels. Code of practice
BS 7932
2003
Determination of the unpolished and polished pendulum test value of surfacing units
BS 7933:1
1998
Electric cables. Accessories. Material characterization. Resinous compounds before cure and in the cured state
BS 7937
2000
Specification for portable fire extinguishers for use on cooking oil fires (class F)
BS 7939
1999
Smoke security devices. Code of practice for manufacture, installation and maintenance
BS 7940
1999
Analogue PSTN terminal support interface
BS 7942
2000
Thermostatic mixing valves for use in care establishments
BS 7943
1999
Guide to the interpretation of petrographical examinations for alkali-silica reactivity
BS 7944
1999
Type 1 heavy duty fire blankets and type 2 heavy duty heat protective blankets
BS 7945
1999
Non-domestic furniture. Seating. Determination of stability
BS 7946
1997
Handbook of audio and video symbols
BS 7947
1997
Connectors used in the field of audio, video and audiovisual engineering
BS 7948:1
1997
Films for wrapping rubber bales. Non-strippable high melting point films
BS 7950
1997
Specification for enhanced security performance of casement and tilt/turn windows for domestic applications
BS 7951
2000
Electricity meters. Alternating-current single-phase static watt-hour telemeters of accuracy class 1 or 2
BS 7952
2001
Specification for chemical firelighters in solid form used for the ignition of solid fuels in residential heating and cooking appliances
BS 7955
1999
Containment nets and sheets on construction works. Specification for performance and test methods
BS 7956
2000
Specification for primers for woodwork
BS 7957
2000
Vitreous enamel systems. Determination of self-cleaning properties
BS 7958
2005
Closed-circuit television (CCTV). Management and operation. Code of practice
BS 7959-1
2004
Materials used for the control of liquid spillages. Determination of sorbency
BS 7960
2005
Door supervisors/stewards. Code of practice
BS 7962
2000
Black materials for masking existing road markings. Specification
BS 7963
2000
Ergonomics of the thermal environment. Guide to the assessment of heat strain in workers wearing personal protective equipment
BS 7965
2000
The selection, installation, operation and calibration of diagonal path transit time ultrasonic flowmeters for industrial gas applications
BS 7966
2000
Recommendations for design of cork removal devices
BS 7969
2004
Adhesives. Ethyl and methyl cyanoacrylate types 1, 2 and 3
BS 7971:1
2002
Protective clothing and equipment for use in violent situations and in training. General requirements
BS 7971:2
2003
Protective clothing and equipment for use in violent situations and in training. Guidance on risk assessment and on the selection, use, cleaning and maintenance of protective clothing and equipment
BS 7971:3
2002
Protective clothing and equipment for use in violent situations and in training. Personal defence shields. Requirements and test methods
BS 7971:4
2002
Protective clothing and equipment for use in violent situations and in training. Limb protectors. Requirements and test methods
BS 7971:7
2003
Protective clothing and equipment for use in violent situations and in training. Slash resistant gloves. Requirements and test methods
BS 7971:8
2003
Protective clothing and equipment for use in violent situations and in training. Blunt trauma torso, shoulder, abdomen and genital protectors. Requirements and test methods
BS 7972
2001
Safety requirements and test methods for children's bedguards for domestic use
BS 7973:1
2001
Spacers and chairs for steel reinforcement and their specification. Product performance requirements
BS 7973:2
2001
Spacers and chairs for steel reinforcement and their specification. Fixing and application of spacers and chairs and tying of reinforcement
BS 7974
2001
Application of fire safety engineering principles to the design of buildings. Code of practice
BS 7976:2
2002
Pendulum testers. Method of operation
BS 7976:3
2002
Pendulum testers. Method of calibration
BS 7977:1
2002
Specification for safety and rational use of energy of domestic gas appliances. Radiant/convectors
BS 7977-2
2003
Specification for safety and rational use of energy of domestic gas appliances. Combined appliances. Gas fire/back boiler
BS 7979
2001
Specification for limestone fines for use with Portland cement
BS 7980
2003
Vehicle lifts. Installation, maintenance, thorough examination and safe use. Code of practice
BS 7981
2002
Code of practice for the installation, maintenance, thorough examination and safe use of mast climbing work platforms (MCWPs)
BS 7982
2001
Guidance on the environmental impact of large-scale fires involving plastics materials
BS 7983
2001
Requirements for payphones for networks other than the ISDN
BS 7984
2001
Keyholding and response services. Code of practice
BS 7985
2002
Code of Practice for the use of rope access methods for industrial purposes
BS 7986
2005
Specification for data quality metrics for industrial measurement and control systems
BS 7987
2001
Road traffic signal systems
BS 7988
2002
Code of practice for the use of information technology (IT) in the delivery of assessments
BS 7989
2001
Specification for recirculatory filtration fume cupboards
BS 7991
2001
Determination of the mode I adhesive fracture energy, GIC, of structural adhesives using the double cantilever beam (DCB) and tapered double cantilever beam (TDCB) specimens
BS 7992
2002
Code of practice for exterior deterrent systems
BS 7998:3
2002
Letter symbols to be used in electrical technology. Logarithmic and related quantities, and their units
BS 8000:8
1994
Workmanship on building sites. Code of practice for plasterboard partitions and dry linings
BS 8000:9
2003
Workmanship on building sites. Cementitious levelling screeds and wearing screeds. Code of practice
BS 8000:10
1995
Workmanship on building sites. Code of practice for plastering and rendering
BS 8000-11.1
1989
Workmanship on building sites. Code of practice for wall and floor tiling. Ceramic tiles, terrazzo tiles and mosaics
BS 8000-11.2
1990
Workmanship on building sites. Code of practice for wall and floor tiling. Natural stone tiles
BS 8000:12
1989
Workmanship on building sites. Code of practice for decorative wallcoverings and painting
BS 8000:13
1989
Workmanship on building sites. Code of practice for above ground drainage and sanitary appliances
BS 8000:14
1989
Workmanship on building sites. Code of practice for below ground drainage
BS 8000:1
1989
Workmanship on building sites. Code of practice for excavation and filling
BS 8000-2.1
1990
Workmanship on building sites. Code of practice for concrete work. Mixing and transporting concrete
BS 8000-2.2
1990
Workmanship on building sites. Code of practice for concrete work. Sitework with in situ and precast concrete
BS 8000:3
2001
Workmanship on building sites. Code of practice for masonry
BS 8000:4
1989
Workmanship on building sites. Code of practice for waterproofing
BS 8000:5
1990
Workmanship on building sites. Code of practice for carpentry, joinery and general fixings
BS 8000:6
1990
Workmanship on building sites. Code of practice for slating and tiling of roofs and claddings
BS 8000:7
1990
Workmanship on building sites. Code of practice for glazing
BS 8000:15
1990
Workmanship on building sites. Code of practice for hot and cold water services (domestic scale)
BS 8000:16
1997
Workmanship on building sites. Code of practice for sealing joints in buildings using sealants
BS 8002
1994
Code of practice for earth retaining structures
BS 8004
1986
Code of practice for foundations
BS 8006
1995
Code of practice for strengthened/reinforced soils and other fills
BS 8007
1987
Code of practice for design of concrete structures for retaining aqueous liquids
BS 8008
1996
Safety precautions and procedures for the construction and descent of machine-bored shafts for piling and other purposes
BS 8010:1
1989
Code of practice for pipelines. Pipelines on land: general
BS 8010-2.3
1988
Code of practice for pipelines. Pipelines on land: design, construction and installation. Asbestos cement
BS 8010-2.4
1988
Code of practice for pipelines. Pipelines on land: design, construction and installation. Prestressed concreted pressure pipelines
BS 8010-2.5
1989
Code of practice for pipelines. Pipelines on land: design, construction and installation. Glass reinforced thermosetting plastics
BS 8010-2.7
1989
Code of practice for pipelines. Pipelines on land: design, construction and installation. Precast concrete
BS 8010:3
1993
Code of practice for pipelines. Pipelines subsea: design, construction and installation
BS 8020
2002
Tools for live working. Insulating hand tools for work on or near conductor rail systems operating at voltages up to 1000 V a.c. or 1500 V d.c.
BS 8081
1989
Code of practice for ground anchorages
BS 8081
1992
Code of practice for ground anchorages
BS 8100:1
1986
Lattice towers and masts. Code of practice for loading
BS 8100:2
1986
Lattice towers and masts. Guide to the background and use of Part 1 'Code of practice for loading'
BS 8100:3
1999
Lattice towers and masts. Code of practice for strength assessment of members of lattice towers and masts
BS 8100:4
1995
Lattice towers and masts. Code of practice for loading of guyed masts
BS 8102
1990
Code of practice for protection of structures against water from the ground
BS 8103:1
1995
Structural design of low-rise buildings. Code of practice for stability, site investigation, foundations and ground floor slabs for housing
BS 8103-2
2005
Structural design of low-rise buildings. Code of practice for masonry walls for housing
BS 8103:3
1996
Structural design of low-rise buildings. Code of practice for timber floors and roofs for housing
BS 8103:4
1995
Structural design of low-rise buildings. Code of practice for suspended concrete floors for housing
BS 8104
1992
Code of practice for assessing exposure of walls to wind-driven rain
BS 8110:1
1997
Structural use of concrete. Code of practice for design and construction
BS 8110:2
1985
Structural use of concrete. Code of practice for special circumstances
BS 8110:3
1985
Structural use of concrete. Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns
BS 8118:1
1991
Structural use of aluminium. Code of practice for design
BS 8118:2
1991
Structural use of aluminium. Specification for materials, workmanship and protection
BS 8201
1987
Code of practice for flooring of timber, timber products and wood based panel products
BS 8202:1
1995
Coatings for fire protection of building elements. Code of practice for the selection and installation of sprayed mineral coatings
BS 8202:2
1992
Coatings for fire protection of building elements. Code of practice for the use of intumescent coating systems to metallic substrates for providing fire resistance
BS 8203
2001
Code of practice for installation of resilient floor coverings
BS 8204:1
2003
Screeds, bases and in-situ floorings. Concrete bases and cement sand levelling screeds to receive floorings. Code of practice
BS 8204:2
2003
Screeds, bases and in-situ floorings. Concrete wearing surfaces. Code of practice
BS 8204-4
2004
Screeds, bases and in-situ floorings. Code of practice for terrazzo wearing surfaces
BS 8204-5
2004
Screeds, bases and in-situ floorings. Code of practice for mastic asphalt underlays and wearing surfaces
BS 8204:6
2001
Screeds, bases and in-situ floorings. Synthetic resin floorings. Code of practice
BS 8204:7
2003
Screeds, bases and in-situ floorings. Pumpable self-smoothing screeds. Code of practice
BS 8205
1985
Code of practice for determining the design of learning spaces where audio-visual equipment will be used
BS 8206:1
1985
Lighting for buildings. Code of practice for artificial lighting
BS 8206:2
1992
Lighting for buildings. Code of practice for daylighting
BS 8206:2
1992
Lighting for buildings. Code of practice for daylighting
BS 8207
1985
Code of practice for energy efficiency in buildings
BS 8207
1994
Code of practice for energy efficiency in buildings
BS 8208:1
1985
Guide to assessment of suitability of external cavity walls for filling with thermal insulants. Existing traditional cavity construction
BS 8210
1986
Guide to building maintenance management
BS 8211:1
1988
Energy efficiency in housing. Code of practice for energy efficient refurbishment of housing
BS 8212
1995
Code of practice for dry lining and partitioning using gypsum plasterboard
BS 8213-1
2004
Windows, doors and rooflights. Code of practice for safety in use and during cleaning of windows and doors (including guidance on cleaning materials and methods)
BS 8213:4
1990
Windows, doors and rooflights. Code of practice for the installation of replacement windows and doorsets in dwellings
BS 8214
1992
Code of practice for fire door assemblies with non-metallic leaves
BS 8214
1990
Code of practice for fire door assemblies with non-metallic leaves
BS 8215
1991
Code of practice for design and installation of damp-proof courses in masonry construction
BS 8216
1991
Code of practice for use of sprayed lightweight mineral coatings used for thermal insulation and sound absorption in buildings
BS 8217
2005
Code of practice for built-up felt roofing
BS 8218
1998
Code of practice for mastic asphalt roofing
BS 8219
2001
Installation of sheet roof and wall coverings. Profiled fibre cement. Code of practice
BS 8220:1
2000
Guide for security of buildings against crime. Dwellings
BS 8220:2
1995
Guide for security of buildings against crime. Offices and shops
BS 8220:3
2004
Guide for security of buildings against crime. Storage, industrial and distribution premises
BS 8221:1
2000
Code of practice for cleaning and surface repair of buildings. Cleaning of natural stones, brick, terracotta and concrete
BS 8221:2
2000
Code of practice for cleaning and surface repair of buildings. Surface repair of natural stones, brick and terracotta
BS 8233
1999
Sound insulation and noise reduction for buildings. Code of practice
BS 8290:1
1991
Suspended ceilings. Code of practice for design
BS 8290:2
1991
Suspended ceilings. Specification for performance of components and assemblies
BS 8290:3
1991
Suspended ceilings. Code of practice for installation and maintenance
BS 8297
2000
Code of practice for Design and installation of non-loadbearing precast concrete cladding
BS 8298
1989
Code of practice for design and installation of natural stone cladding and lining
BS 8300
2001
Design of buildings and their approaches to meet the needs of disabled people. Code of practice
BS 8301
1985
Code of practice for building drainage
BS 8303:2
1994
Installation of domestic heating and cooking appliances burning solid mineral fuels. Installation of domestic heating and cooking appliances buring solid mineral fuels. Specification for installing and commissioning on site
BS 8313
1997
Code of practice for accommodation of building services in ducts
BS 8401
2003
Health informatics standards. Status as of July 2001. Guide
BS 8403
2002
Specification for aquatic spineboards for recovering casualties in controlled aquatic conditions
BS 8404
2001
Packaging. Child-resistant packaging. Requirements and testing procedures for non-reclosable packages for pharmaceutical products
BS 8405
2003
Personal protective equipment against falls from a height. Descender devices. Single-hand operated descender devices for self or assisted rescue
BS 8406
2003
Event stewarding and cStandardd safety services. Code of practice
BS 8407
2002
Specification for mechanical and spliced joints in conveyor belting for use underground
BS 8409
2002
Soft indoor play areas. Code of practice
BS 8414:1
2002
Fire performance of external cladding systems. Test methods for non-loadbearing external cladding systems applied to the face of a building
BS 8416
2002
Specification for hole-saws
BS 8417
2003
Preservation of timber. Recommendations
BS 8418
2003
Installation and remote monitoring of detector activated CCTV systems. Code of practice
BS 8420
2003
Methods of measuring irregularities on surfaces of roads, footways and other paved areas using straightedges and wedges
BS 8421:1
2003
Guide to health informatics. Results of healthcare service procedures. Delivery to end-users. General guidance and recommendations
BS 8422
2003
Force measurement. Strain gauge load cell systems. Calibration method
BS 8423
2002
Fireguards for fires and heating appliances for domestic use. Specification
BS 8424
2004
Building hardware. Pull handles. Requirements and test methods
BS 8425
2003
Code of practice for installation of laminate floor coverings
BS 8426
2003
A code of practice for e-support in e-learning systems
BS 8428
2004
Protective clothing. Protection against liquid chemicals. Performance requirements for chemical protective suits with liquid-tight connections between different parts of the clothing for emergency teams (type 3-ET equipment)
BS 8434-2
2003
Methods of test for assessment of the fire integrity of electric cables. Test for unprotected small cables for use in emergency circuits. BS EN 50200 with a 930°C flame and with water spray
BS 8438
2004
Troughed belt conveyors. Specification
BS 8444:3
1996
Risk management. Guide to risk analysis of technological systems
BS 8451
2004
Rubber hoses for gas welding, cutting and allied processes. High kink-resistant heavy duty welding hose (type H). Specification
BS 8500:1
2002
Concrete. Complementary British Standard to BS EN 206-1. Method of specifying and guidance for the specifier
BS 8500:2
2002
Concrete. Complementary British Standard to BS EN 206-1. Specification for constituent materials and concrete
BS 8501
2002
Graphical symbols and signs. Public information symbols
BS 8502
2003
Graphical symbols and signs. Creation and design of public information symbols. Requirements
BS 8555
2003
Environmental management systems. Guide to the phased implementation of an environmental management system including the use of environmental performance evaluation
BS 8600
1999
Complaints management systems. Guide to design and implementation
BS 8666
2005
Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete
BS 8726:1
2002
Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and design. Compression springs
BS 8726:2
2002
Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and design. Torsion springs
BS 8800
2004
Guide to occupational health and safety management systems
BS 8855:2
2000
Soil analysis. Method for determination of coal tar-derived phenolic compounds
BS 8888
2004
Technical product documentation (TPD). Specification for defining, specifying and graphically representing products
BS 9000:1
1989
General requirements for a system for electronic components of assessed quality. Specification of general procedures
BS 9000:2
1996
General requirements for a system for electronic components of assessed quality. Specification for the national implementation of the CECC system
BS 9000:3
1996
General requirements for a system for electronic components of assessed quality. Specification for the national implementation of the IECQ system
BS 9000:4
1991
General requirements for a system for electronic components of assessed quality. Specification of procedures for the approval of an organization
BS 9000:5
1989
General requirements for a system for electronic components of assessed quality. Specification of qualification approval and conformance testing procedures
BS 9000:6
1989
General requirements for a system for electronic components of assessed quality. Specification of capability approval procedures
BS 9000:7
1989
General requirements for a system for electronic components of assessed quality. Specification of lot formation, release procedures and certified test records
BS 9001
1967
Sampling procedures and tables for inspection by attributes for electronic parts of assessed quality
BS 9003
1981
General requirements for a system for electronic components of assessed quality. Specification for the national implementation of the CECC system
BS 9003
1977
Requirements for the manufacture of electronic components of assessed quality intended for long life applications
BS 9010
1971
Specification for transmitter tubes of assessed quality: generic data and methods of test
BS 9011
1970
Rules for the preparation of detail specifications for transmitter tubes of assessed quality (up to 1 kW anode dissipation)
BS 9014
1974
Specification for pulse modulator hydrogen thyratron tubes of assessed quality: generic data and methods of test
BS 9015
1974
General requirements for a system for electronic components of assessed quality. Specification of lot formation, release procedures and certified test records
BS 9015
1970
Specification for counter and indicator tubes of assessed quality: generic data and methods of test
BS 9016
1970
Rules for the preparation of detail specifications for indicator tubes of assessed quality
BS 9020
1970
Specification for corona stabilizer tubes of assessed quality: generic data and methods of test
BS 9020
1974
Detail specification for very low leakage general purpose silicon diodes
BS 9021
1970
Rules for the preparation of detail specifications for corona stabilizer tubes of assessed quality
BS 9023
1978
Specification for flash tubes of assessed quality: generic data and methods of test
BS 9025
1970
Specification for travelling-wave amplifier tubes of assessed quality: generic data and methods of test
BS 9026
1971
Rules for the preparation of detail specifications for pulse modulator hydrogen thyratrons of assessed quality
BS 9026
1970
Rules for the preparation of detail specifications for low noise signal amplifier tubes of assessed quality with integral permanent magnet focusing
BS 9027
1971
Rules for the preparation of detail specifications for forward travelling-wave power tubes of assessed quality
BS 9030
1971
Specification for magnetrons of assessed quality: generic data and methods of test
BS 9031
1971
Rules for the preparation of detail specifications for pulsed fixed-frequency magnetrons of assessed quality
BS 9040
1978
Specification for gas-filled micStandardave switching tubes of assessed quality: generic data and methods of test
BS 9041
1971
Rules for the preparation of detail specifications for pulsed fixed-frequency magnetrons of assessed quality
BS 9042
1971
Rules for the preparation of detail specifications for gas-filled micStandardave switching tubes of assessed quality: ATR tubes
BS 9043
1971
Specification for klystrons of assessed quality: generic data and methods of test
BS 9044
1971
Rules for the preparation of detail specifications for gas-filled micStandardave switching tubes of assessed quality: passive protection tubes
BS 9045
1981
Specification for micStandardave noise generators: generic data and methods of test
BS 9047
1978
Specification for glow modulator tubes of assessed quality: generic data and methods of test
BS 9050
1971
Specification for cathode ray tubes of assessed quality: generic data and methods of test
BS 9051
1971
Rules for the preparation of detail specifications for high precision professional instrument cathode ray tubes
BS 9052
1970
Rules for the preparation of detail specifications for general purpose professional instrument cathode ray tubes of assessed quality
BS 9054
1971
Rules for the preparation of detail specifications for radar display cathode ray tubes of assessed quality
BS 9055
1982
Specification for surge arrester tubes of assessed quality: generic data and methods of test
BS 9060
1975
Detail specification for silicon rectifier diodes with transient reverse voltage absorption characteristics
BS 9060
1971
Specification for camera tubes of assessed quality: generic data and methods of test
BS 9061
1971
Rules for the preparation of detail specifications for vidicon tubes of assessed quality electromagnetic focusing and scanning
BS 9062
1983
Specification for micStandardave passive components of assessed quality: generic data and methods of test
BS 9064
1983
Sectional specification for circulators or isolators of assessed quality for capability approval
BS 9070:3
1970
Specification for fixed capacitors of assessed quality: generic data and methods of test. Tantalum electrolytic capacitors
BS 9070:5
1971
Specification for fixed capacitors of assessed quality: generic data and methods of test. Ceramic dielectric capacitors
BS 9070:6
1971
Specification for fixed capacitors of assessed quality: generic data and methods of test. Polycarbonate dielectric capacitors and polyethylene terephthalate dielectric capacitors for d.c. use and polypropylene dielectric capacitors for d.c. and a.c. use
BS 9070:7
1971
Specification for fixed capacitors of assessed quality: generic data and methods of test. Mica dielectric capacitors
BS 9073-N001
1973
Sampling procedures and tables for inspection by attributes for electronic parts of assessed quality
BS 9073-N0034
1978
Qualified products list of electronic components of assessed quality (including list of approved firms)
BS 9074-N001
1974
Requirements for the manufacture of electronic components of assessed quality intended for long life applications
BS 9074-N002
1974
Specification for general procedures to be followed for the capability approval of electronic components covered by BS 9000:Part 1
BS 9074-N007
1981
Rules for the preparation of detail specifications for transmitter tubes of assessed quality (up to 1 kW anode dissipation)
BS 9076-N001 to N004
1974
Rules for the preparation of detail specifications for gas-filled micStandardave switching tubes of assessed quality: passive protection tubes
BS 9076-N005
1973
Specification for micStandardave noise generators: generic data and methods of test
BS 9078-N002
1974
Specification for glow modulator tubes of assessed quality: generic data and methods of test
BS 9090
1977
Variable capacitors of assessed quality: generic data and methods of test
BS 9093-N001
1977
Rules for the preparation of detail specifications for electrical charge storage display cathode ray tubes of assessed quality
BS 9100
1983
Specification for capability approval for custom-built capacitors and capacitor modules: generic data and methods of test
BS 9110
1969
Specification for fixed resistors of assessed quality: generic data and methods of test
BS 9111
1969
Specification for micStandardave passive components of assessed quality: generic data and methods of test
BS 9111-N002
1970
Sectional specification for circulators or isolators of assessed quality for capability approval
BS 9112-N001
1970
Specification for fixed capacitors of assessed quality: generic data and methods of test. Polycarbonate dielectric capacitors and polyethylene terephthalate dielectric capacitors for d.c. use and polypropylene dielectric capacitors for d.c. and a.c. use
BS 9112
1970
Rules for the preparation of detail specifications for fixed non-wirewound resistors (type 2) of assessed quality. General application category
BS 9113
1970
Rules for the preparation of detail specifications for fixed wirewound precision resistors of assessed quality. General application category
BS 9114-N001
1973
Specification for fixed capacitors of assessed quality: generic data and methods of test. Tantalum electrolytic capacitor modules
BS 9114-N002
1971
Detail specification for fixed, tantalum electrolytic capacitors: styles C1 HAA (uninsulated) and C1 HBA (insulated). General application category
BS 9114-N003
1974
Detail specification for fixed metallized mica dielectric capacitors (style C2AED). Rectangular non-metallic case, centred wires on one face. General application category
BS 9114-N004
1974
Detail specification for fixed metallized mica dielectric capacitors (style C2AEA). Rectangular non-metallic case, axial wires at both ends. General application category
BS 9114
1970
Rules for the preparation of detail specifications for fixed wirewound resistors (Type 2) of assessed quality
BS 9120
1988
Specification for radio interference suppression filters of assessed quality: generic data and methods of test
BS 9125
1988
Specification for capability approval of manufacturers of passive radio interference suppression filter units of assessed quality generic data
BS 9130
1972
Specification for potentiometers of assessed quality: generic data and methods of test
BS 9150
1983
Specification for electrical relays of assessed quality: generic data and methods of test
BS 9151
1972
Rules for the preparation of detail specifications for all-or-nothing electromechanical relays of assessed quality. Full and basic assessment levels
BS 9200
1972
Specification for reed contact units of assessed quality: generic data and methods of test
BS 9210
1984
Specification for radio frequency connectors of assessed quality: generic data and methods of test
BS 9215
1991
Specification for capability approval of radio frequency connector cable assemblies and radio frequency cable assemblies: generic specification, test methods, procedures, customer blank detail specification and guidance
BS 9220-N001
1971
Detail specification for fixed non-wirewound insulated resistors (type 2B), axial wire terminations. Typical construction: carbon composition. Full assessment level
BS 9220
1971
Specification for rigid waveguide tubing of assessed quality: generic data and methods of test
BS 9240-N001
1975
Rules for the preparation of detail specifications for fixed wirewound resistors (Type 2) of assessed quality
BS 9240-N002
1977
Detail Specification. Fixed wirewound non-insulated resistor (Type 2) of assessed quality: axial terminations. General application category
BS 9240-N003
1980
Fixed wirewound non-insulated resistors (type 2) of assessed quality. General application category
BS 9240
1975
Flanges, fastenings and accessories of assessed quality for waveguide tubing and components: generic data and methods of test
BS 9300
1969
Specification for semiconductor devices of assessed quality: generic data and methods of test
BS 9301-N002
1971
Detail specification for silicon n-p-n planar medium power transistors for oscillator and switching applications
BS 9301
1969
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: general purpose signal diodes
BS 9302-N025
1978
Detail specification for silicon n-p-n planar epitaxial transistors
BS 9302
1969
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: switching diodes
BS 9304
1969
Detail specification for silicon n-p-n planar transistors for low level, low noise applications
BS 9305
1969
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: voltage regulator diodes
BS 9320
1971
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: micStandardave mixer diodes (c.w. operation)
BS 9321
1971
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: micStandardave mixer diodes (pulse operation)
BS 9322
1971
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: micStandardave detector diodes
BS 9330
1969
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: low current rectifier diodes (up to 3 ampere rating)
BS 9331
1969
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: medium current rectifier diodes (1-100 ampere rating)
BS 9332
1970
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: high current rectifier diodes (greater than 50 ampere rating)
BS 9333
1972
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: controlled avalanche rectifier diodes
BS 9340
1969
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: low current general purpose thyristors (up to 3 ampere rating)
BS 9341
1969
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: medium current general purpose thyristors (1-100 ampere rating)
BS 9360-N016
1978
Detail specification for silicon voltage regulator diodes. 1.5 W, 3.3 to 33 V (5%), hermetically sealed. General application category Q
BS 9360-N017
1978
Detail specification for silicon voltage regulator diodes. 400 mW, 2.7 to 33 V (5%), hermetically sealed, glass encapsulation. General application category Q
BS 9360-N018
1978
Detail specification for silicon voltage regulator diodes. 1.5 W, 6.8 to 200 V (5%), hermetically sealed. General application category C
BS 9360-N019
1978
Detail specification for silicon voltage regulator diodes. 1.0 W, 3.3 to 33 V (5%), hermetically sealed. Full assessment level
BS 9360-N020
1978
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: transient suppressor diodes
BS 9360
1971
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: low frequency, low power transistors
BS 9361
1971
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: high frequency, low power transistors
BS 9362
1972
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: high power transistors for linear applications
BS 9363
1972
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: high power transistors for switching applications
BS 9364-N011
1978
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: micStandardave Gunn oscillators (c.w. operation)
BS 9364-N012
1978
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: micStandardave Gunn oscillators (pulse operation)
BS 9364-N016
1979
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: micStandardave avalanche oscillators (pulse operation)
BS 9364-N017
1979
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: varactor diodes for frequency multiplication
BS 9364-N018
1979
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: low current rectifier diodes (up to 3 ampere rating)
BS 9365
1971
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: transistors (general)
BS 9370
1983
Specification for capability approval of light emitting and infra-red diode arrays of assessed quality: generic data and methods of test
BS 9400
1970
Specification for integrated electronic circuits and micro-assemblies of assessed quality (qualification approval procedures): generic data and methods of test
BS 9401
1972
Rules for the preparation of detail specifications for semiconductor devices of assessed quality: controlled avalanche rectifier diodes
BS 9401
1970
Rules for the preparation of detail specifications for integrated circuits of assessed quality: TTL digital gate circuits. General application category
BS 9402
1972
Rules for the preparation of detail specifications for integrated circuits of assessed quality: DTL digital gate circuits (general application category)
BS 9403
1972
Rules for the preparation of detail specifications for integrated circuits of assessed quality: TTL digital inverter circuits. General application category
BS 9404
1972
Rules for the preparation of detail specifications for integrated circuits of assessed quality: DTL digital inverter circuits. General application category
BS 9405
1972
Rules for the preparation of detail specifications for integrated circuits of assessed quality: TTL digital interconnected gate circuits. General application category
BS 9420
1972
Rules for the preparation of detail specifications for integrated circuits of assessed quality: TTL digital bistable circuits. General application category
BS 9450
1998
Detail specification for low power n-p-n 60 V, 600 mW amplifying transistors of assessed quality, ambient rated, hermetic encapsulation. Full plus additional assessment level
BS 9500
1990
Specification for sockets of assessed quality for plug-in electronic components: generic data and methods of test
BS 9520
1983
Specification for electrical connectors of assessed quality for d.c. and low frequency application: generic data, methods of test and capability approval procedures
BS 9521
1983
Specification for removable contacts of assessed quality for electrical connectors as defined by BS 9520: generic data, methods of test and rules for the preparation of detail specifications
BS 9522
1972
Rules for the preparation of detail specifications for integrated circuits of assessed quality: differential operational amplifiers. General application category
BS 9530
1988
Specification for cable fitting accessories of assessed quality for circular electrical connectors: generic data, methods of test and rules for the preparation of detail specifications
BS 9540
1983
Sectional specification for airframe-fit circular electrical connectors of assessed quality for low-frequency a.c. and d.c. applications (including engine connectors): requirements for design, performance and testing, and rules for the preparation of deta
BS 9550
1989
Specification for capability approval procedures for d.c. and low frequency connector cable assemblies and wiring harnesses: generic data
BS 9561
1979
Specification for lever operated switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications
BS 9562
1982
Specification for microswitches (sensitive switches) of assessed quality: generic data and methods of test: general rules for the preparation of detail specifications. Basic and full assessment levels
BS 9563
1979
Specification for rotary (manual) switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications
BS 9563-N001
1974
Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with integral metal housings for d.c. and low frequency applications. Full and basic assessment levels
BS 9564
1980
Specification for push-button switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications
BS 9565
1981
Specification for printed board mounted programming switches of assessed quality: generic data and methods of test
BS 9600
1983
Specification for piezoelectric crystal filters of assessed quality: generic data and methods of test
BS 9610
1982
Specification for quartz crystal units of assessed quality: generic data and methods of test
BS 9612
1973
Rules for the preparation of detail specifications for welded seal quartz crystal units of assessed quality for oscillator applications. General application category
BS 9613
1973
Rules for the preparation of detail specifications for glass-encapsulated quartz crystal units of assessed quality for oscillator applications. General application category
BS 9618
1988
Specification for capability approval of quartz crystal units: generic data
BS 9630
1973
Magnetic oxide (ferrite) cores of assessed quality intended for linear inductor and transformer applications: generic data and methods of test
BS 9720
1989
Specification for custom-built transformers and inductors of assessed quality: generic data and methods of test
BS 9721
1985
Sectional specification for signal transformers of assessed quality for use in electronic equipment for capability approval
BS 9722
1978
Sectional specification for signal transformers of assessed quality for use in electronic equipment: full assessment level
BS 9727
1978
Rules for the preparation of detail specifications for oven temperature controlled crystal oscillators (OXCO). Full assessment level
BS 9730
1986
Sectional specification for power transformers of assessed quality for switched mode power supplies (SMPS) for use in electronic equipment for capability approval
BS 9734
1978
Sectional specification for pulse transformers of assessed quality for use in electronic equipment: full assessment level
BS 9741
1986
Sectional specification for inductors of assessed quality for use in electronic equipment for capability approval
BS 9742
1978
Sectional specification for inductors of assessed quality for use in electronic equipment: full assessment level
BS 9753
1986
Sectional specification for variable r.f. type inductors of assessed quality for use in electronic equipment for capability approval
BS 9760
1977
Specification for printed circuits of assessed quality: generic data and methods of test: capability approval procedure and rules
BS 9761
1992
Sectional specification for inductors of assessed quality for use in electronic equipment for capability approval
BS 9761
1988
Sectional specification for capability approval of manufacturers of multilayer rigid printed wiring boards of assessed quality with plated through holes
BS 9762
1988
Sectional specification for capability approval of manufacture of double-sided rigid printed wiring boards of assessed quality with plated through holes
BS 9763
1992
Specification for fixed radio frequency inductors of assessed quality: generic data and methods of test
BS 9763
1988
Sectional specification for capability approval of manufacturers of single- or double-sided printed wiring boards of assessed quality without plated through holes
BS 9764
1988
Sectional specification for capability approval of manufacturers of single- or double-sided flexible printed wiring boards of assessed quality without through hole connections and with or without rigidizing component materials
BS 9765
1992
Detail specification for fixed insulated (unshielded) radio frequency inductors. Wire wound on ferrite, iron dust or phenolic cylindrical former. Full assessment level
BS 9765
1988
Sectional specification for capability approval of manufacturers of double-sided flexible printed wiring boards of assessed quality with through hole connections and with or without rigidizing component materials
BS 9766
1983
Specification for printed circuits of assessed quality: sectional specification for multilayer flexi-rigid printed circuits with through hole connections
BS 9800
1985
Specification for capability approval of modular electronic networks: generic specification
BS 9925:03.0
1988
Harmonized system of quality assessment for electronic components. Inductor and transformer cores for telecommunications. Sectional specification: Magnetic oxide cores for transformers and chokes for power applications
BS 9925:0
1984
Harmonized system of quality assessment for electronic components. Inductor and transformer cores for telecommunications. Generic specification
BS 9925:01.0
1984
Harmonized system of quality assessment for electronic components. Inductor and transformer cores for telecommunications. Sectional specification: magnetic oxide cores for inductor applications
BS 9925:02.0
1987
Harmonized system of quality assessment for electronic components. Inductor and transformer cores for telecommunications. Sectional specification: magnetic oxide cores for broad-band transformers
BS 9940:01.0
1983
Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Sectional specification: fixed low power non-wirewound resistors
BS 9940:03.0
1983
Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Sectional specification: fixed precision resistors
BS 9940:04.0
1984
Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Sectional specification: fixed resistor networks with individually measurable resistors
BS 9940:05.00
1985
Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Sectional specification: fixed resistor networks in which not all resistors are individually measurable
BS 10175
2001
Investigation of potentially contaminated sites. Code of practice
BS 15000:2
2003
IT service management. Code of practice for service management
BS 15000:1
2002
IT service management. Specification for service management
BS 123000
2001
System of quality assessment. Generic specification. Printed boards
BS 123100
2001
System of quality assessment. Sectional specification. Rigid single-sided and double-sided printed boards with plain holes
BS 123100:003
2001
System of quality assessment. Capability detail specification. Rigid single-sided and double-sided printed boards with plain holes
BS 123200
2001
System of quality assessment. Sectional specification. Rigid double-sided printed boards with plated-through holes
BS 123200:003
2001
System of quality assessment. Capability detail specification. Rigid double-sided printed boards with plated-through holes
BS 123300
2001
System of quality assessment. Sectional specification. Rigid multilayer printed boards
BS 123300:003
2001
System of quality assessment. Capability detail specification. Rigid multilayer printed boards
BS 123400
2001
System of quality assessment. Sectional specification. Flexible single-sided and double-sided printed boards without through-connections
BS 123400:003
2001
System of quality assessment. Capability detail specification. Flexible single-sided and double-sided printed boards without through-connections
BS 123500
2001
System of quality assessment. Sectional specification. Flexible single-sided and double-sided printed boards with through-connections
BS 123500:003
2001
System of quality assessment. Capability detail specification. Flexible Single-sided and double-sided printed boards with through-connections
BS 123600
2001
System of quality assessment. Sectional specification. Flex-rigid multilayer printed boards with through-connections
BS 123600:003
2001
System of quality assessment. Capability detail specification. Flex-rigid multilayer printed boards with through-connections
BS 123700
2001
System of quality assessment. Sectional specification. Flex-rigid double-sided printed boards with through-connections
BS 123700:003
2001
System of quality assessment. Capability detail specification. Flex-rigid double-sided printed boards with through-connections
BS 123800
2001
System of quality assessment. Sectional specification. Flexible multilayer printed boards with through-connections
BS 123800:003
2001
System of quality assessment. Capability detail specification. Flexible multilayer printed boards with through-connections
<< Return to BSI Standards Listing