All Carnegie Library of Pittsburgh locations will be closed on Monday, September 1.

Tools

Topics & Collections

small text medium text large text

BSI Standards List

Standard
Year
Title
BS AU 4
1963
Power take offs (PTOs). Specification for dimensions for clearance envelope for commercial road vehicles
BS AU 5
1963
Specification for material and performance requirements for air reservoirs for road vehicles
BS AU 6
1963
Methods of test for lateral transient response behaviour of passenger cars
BS AU 8
1963
Specification for mounting dimensions of alternators, types 1, 2 and 3 for commercial vehicles and buses
BS AU 9
1963
Diesel engines. High-pressure fuel injection pipe end-connections with 60° female cone
BS AU 10
1963
Low pressure switches
BS AU 11
1963
Method of test for discoloration of organic finishes and plastics materials by rubber
BS AU 12
1963
Recommendations for the selection of starters and starter drives for cars and light commercial vehicles fitted with petrol engines
BS AU 13
1963
41/2 in diameter starter 12 volt d.c.
BS AU 14
1963
Seats with integral seat belt anchorages
BS AU 15
1963
Specification for symbols for controls, indicators and tell-tales for road vehicles. Print of symbols for reproduction purposes
BS AU 17
1963
Specification for fuel injection high pressure pipe fittings
BS AU 18
1963
Specification for repairs to tyres for motor vehicles used on the public highway
BS AU 19
1963
Specification for road vehicles - low tension cable connections for ignition coils
BS AU 20
1963
Hydraulic brake systems, using non-petroleum base brake fluids for road vehicles. Specification for non-petroleum base brake fluid
BS AU 21
1964
Vehicle identification numbers (VIN). Specification for a visible vehicle identification number
BS AU 22
1964
Brake linings. Method for measurement of compressibility of brake lining material
BS AU 23
1964
Specification for passive seat belt systems
BS AU 25
1964
Spray reducing devices for heavy goods vehicles. Specification for design of containment devices
BS AU 27
1964
Vehicle security. Specification for security marking of glazing for passenger cars and car derived vehicles
BS AU 28
1964
Vehicle security. Specification for security glazing for passenger cars and car derived vehicles
BS AU 29
1964
Vehicle security. Specification for central power locking systems for passenger cars and car derived vehicles
BS AU 31
1963
Vehicle security. Specification for locking systems for goods vehicle driver's compartments
BS AU 32
1964
Vehicle security. Specification for locking systems for goods vehicle load compartments
BS AU 33
1964
Drawbars for caravans and light trailers. Method of calculation for the mechanical strength of steel drawbars
BS AU 34
1964
Drawbars for caravans and light trailers. Specification for the design of aluminium drawbars and chassis
BS AU 35
1964
Specification for dimensions of four-hole flanges for gear-driven air compressors for commercial vehicles and buses
BS AU 36
1964
Specification for calculation of forces on control devices for inertia braking of caravans and light trailers
BS AU 37
1964
Gearbox flanges. Specification for dimensions of cross-tooth gearbox flanges, type T, for commercial vehicles and buses
BS AU 38
1964
Gearbox flanges. Specification for dimensions for type A gearbox flanges for commercial vehicles and buses
BS AU 39
1964
Gearbox flanges. Specification for dimensions for type S gearbox flanges for commercial vehicles and buses
BS AU 41
1964
Power take offs (PTOs). Specification for dimensions of side openings for commercial road vehicles
BS AU 42
1964
Power take offs (PTOs). Specification for dimensions of connections for rear mounted power take offs for commercial road vehicles
BS AU 43
1964
Hydraulic brake systems using petroleum base brake fluids for road vehicles. Specification for petroleum base reference fluid
BS AU 44
1964
Maximum road speed limiters for motor vehicles. Specification for installed requirements
BS AU 45
1964
Maximum road speed limiters for motor vehicles. Specification for system and component requirements
BS AU 46
1964
Specification for automotive synchronous belt drives
BS AU 47
1965
Specification for dimensions of 40 mm drawbar couplings between commercial road vehicles and trailers
BS AU 49
1965
Specification for dimensions of 50 mm drawbar couplings between commercial road vehicles and trailers
BS AU 50-1.8
1989
Dimensions of a 'quick-detachable' coupling for use with single-line vacuum braking systems (inverted) on trailers and semi-trailers
BS AU 50-2.3
1994
Specification for towing hook for use between trailers of 5-14 tons gross weight and towing vehicle
BS AU 50-3.3
1980
Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (heavy commercial vehicles)
BS AU 50-3.5
1983
51/2 in diameter generator: 12 or 24 volt d.c. (swung-mounted: ventilated)
BS AU 50-3.6
1982
7 in diameter generator (high speed): 24 volt d.c. (cradle-mounted)
BS AU 50-1.0.1
1999
Specification for motor vehicle lighting and signalling equipment. Headlamps for mechanically assisted pedal cycles (mopeds)
BS AU 50-1.1.2
2001
Dimensions for front brake steel backing plates for use in commercial vehicles
BS AU 50-1.1.3
1993
Dimensions for rear brake steel backing plates for use in commercial vehicles
BS AU 50-1.2.2
1991
Specification for advance warning triangle to indicate temporary obstructions
BS AU 50-1.2.3
1993
Specification for seat belt anchorage points
BS AU 50-1.2.4
1994
Windscreen wiper motor (12 and 24 volt)
BS AU 50-1.3.3
1996
Tyres and wheels. Tyres. Car tyres. Tyres (metric series)
BS AU 50-1.4.6
1996
Tyres and wheels. Tyres. Commercial vehicle tyres. Method of measuring rolling resistance
BS AU 50-1.4.7
1993
Tyres and wheels. Tyres. Commercial vehicle tyres. Method of test for verifying tyre capabilities
BS AU 50-1.4.8
1998
Specification for tyres and wheels. Tyres. Off-the-road tyres. Specification for narStandard and wide base tyre designations and dimensions
BS AU 50-1.5.1
1994
Specification for tyres and wheels. Tyres. Off-the-road tyres. Specification for narStandard and wide base tyre loads and inflation pressures
BS AU 50-1.5.2
1994
Specification for tyres and wheels. Tyres. Off-the-road tyres. Specification for tyres for mobile cranes and similar specialized machines
BS AU 50-1.5.3
1994
Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Specification for designation and dimensions for ply rating marked series tyres
BS AU 50-1.5.5
1998
Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Specification for classification codes and nomenclature for ply rating marked series tyres
BS AU 50-1.5.6
1994
Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Specification for ply rating marked series tyres for log skidders
BS AU 50-1.6.7
1998
Tyres and wheels. Tyres. Industrial vehicle tyres
BS AU 50-1.6.8
2000
Tyres and wheels. Tyres. Industrial vehicle tyres. Specification for code-designated series tyres
BS AU 50-1.7.1
1989
Tyres and wheels. Tyres. Industrial vehicle tyres. Specification for pneumatic tyres (metric series) on 5° tapered or flat base rims: designation, dimensions and marking
BS AU 50-4.5.1
1995
Tyres and wheels. Valves. Tyre valve threads 9V1, 10V2, 12V1 and 13V1
BS AU 50-4.5.2
1996
Tyres and wheels. Valves. Tyre valve threads 8V2, 10V1, 11V1, 13V2, 15V1, 16V1, 17V1, 17V2, 17V3, 19V1 and 20V1
BS AU 50-4.6.3
1991
Tyres and wheels. Valves. Dimensions for ISO core chamber No. 2 for tyre inflation valves
BS AU 50-4.7.1
1991
Tyres and wheels. Valves. Code of practice for the selection and care of tyre inflation valves for passenger cars (including caravans and light trailers)
BS AU 51
1964
Method of evaluating surface and material flaws of disc brake pads after testing
BS AU 52
1964
Specification for vehicle support stands for cars and light vans
BS AU 53
1964
Specification for portable wheel ramps for cars and light vans
BS AU 54
1964
Specification for dimensions of steering ball joints for commercial road vehicles
BS AU 55
1964
Specification for nominal dimensions and tolerances of flywheel housings for reciprocating internal combustion engines
BS AU 56
1964
Specification for dimensions of cylindrical shaft ends and hubs for alternators for commercial vehicles and buses
BS AU 57
1964
Impact tests on road vehicles. Specification for measurement techniques and general instrumentation
BS AU 58
1964
Impact tests on road vehicles. Specification for measurement techniques using optical instrumentation
BS AU 59
1964
Specification for graphical symbols to designate brake fluid types in road vehicles
BS AU 60
1964
Specification for seven-core connecting cable for road vehicles
BS AU 61
1964
Methods of test and general requirements for road vehicle alternators with regulators
BS AU 62
1964
Specification for starter motor electrical connections for passenger cars
BS AU 63
1964
Methods of test and general requirements for road vehicle starter motors
BS AU 64
1964
Fifth wheel couplings for commercial vehicles
BS AU 65
1964
Specification for circular electronic tachographs for road vehicles
BS AU 66
1964
Specification for light domestic duty jumper lead sets for automotive starting
BS AU 67
1964
Glossary of terms for road vehicle lighting and light signalling devices
BS AU 68
1964
Method of testing strength of drawbar couplings and eyes for hinged drawbars
BS AU 69
1965
Specification for mechanical coupling between tractors and semi-trailers: interchangeability
BS AU 70
1965
Automotive windscreen repair. Code of practice
BS AU 71
1965
Methods of test for electrical disturbance by conduction and coupling. General
BS AU 72
1965
Methods of test for electrical disturbance by conduction and coupling. Electrical transient conduction along supply lines only on passenger cars and light commercial vehicles with 12 V supply
BS AU 73
1965
Methods of test for electrical disturbance by conduction and coupling. Electrical transient conduction along supply lines only on commercial vehicles with 24 V supply
BS AU 74
1965
Glossary of terms for road vehicle dynamics and road holding ability
BS AU 75
1965
Specification for front towing attachments for commercial road vehicles and buses over 3.5 t
BS AU 76
1965
Method for determination of the centre of gravity of road vehicles with two axles
BS AU 77
1965
Method of test for lateral stability of passenger car/trailer combinations
BS AU 78
1967
Specification for automotive V-ribbed belt drives. Dimensions of pulleys and belts of PK profile
BS AU 79
1965
Specification for clutch housings for reciprocating internal combustion engines. Nominal dimensions and tolerances
BS AU 80
1965
Specification for performance of automotive laminated windscreen repair systems
BS AU 81
1965
Specification for diametral pitch starter motor pinions for road vehicles
BS AU 82
1965
Specification for interchangeability of mechanical coupling between towing vehicles with rear-mounted couplings and drawbar trailers
BS AU 83
1965
Road vehicle unscreened low tension cables
BS AU 84
1965
Passenger cars. Power-off reactions of a vehicle in a turn. Open-loop test method
BS AU 85
1965
Code of practice for remanufacture of spark and compression ignition engines
BS AU 86
1965
Specification for elasticated straps
BS AU 87
1965
Specification for components for commercial vehicles and buses. Cross-tooth propeller shaft flanges, type T
BS AU 89
1965
Fuel injection equipment. Vocabulary. High-pressure pipes and end-connections
BS AU 90
1965
Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M14 x 1, 25 glow-plugs
BS AU 91
1965
Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M12 x 1.25 glow-plugs
BS AU 92
1965
Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M 10 glow plugs
BS AU 93
1965
Road vehicles. M14 X 1,25 compact spark-plugs with conical seating and their cylinder head housing
BS AU 94
1965
Road vehicles. M18 X 1,5 spark-plugs with conical seating and their cylinder head housing
BS AU 95
1965
Road vehicles. Ignition systems. Vocabulary
BS AU 96
1965
Road vehicles. Ignition systems. Electrical performance and function test methods
BS AU 97
1965
Specification for roof load carriers. Roof bars
BS AU 98
1965
Code of practice for breakaway cables and secondary couplings
BS AU 99
1965
Passenger cars and light vans. Commercial towing pole assemblies. Specification
BS AU 100
1965
Mechanical stop lamp switch
BS AU 101
1965
Windscreen wiper motor, 12 or 24 volt (heavy duty)
BS AU 102
1965
Windscreen wiper motor (12 volt)
BS AU 103
1965
Junction box
BS AU 104
1965
Fuse (35 A and 50 A) for vehicle electrical equipment
BS AU 105
1965
Specification for solid rubbers
BS AU 106
1965
Specification for cellular rubber components
BS AU 107
1965
Specification for plain and reinforced hoses of rubber
BS AU 108
1965
Specification for vacuum brake hose (heavy duty) of oil-resistant rubber
BS AU 109
1965
Specification for rubber hoses and hose assemblies for automotive air pressure braking systems
BS AU 111
1965
Specification for methods for the atmospheric exposure testing of rubber
BS AU 112
1965
Specification for dimensional characteristics of coupling ball for caravans and light trailers
BS AU 115
1965
Specification for strength requirements of towing brackets and coupling balls for caravans and light trailers
BS AU 116
1965
Dimensions of panel piercing for switches
BS AU 117
1965
Specification for dimensions of chassis for 27 ft public service vehicle (double deck)
BS AU 118
1965
Specification for dimensions of chassis for 30 ft public service vehicle (double deck)
BS AU 119
1965
Recommendations for the storage, shipment and maintenance of lead acid batteries for motor vehicles
BS AU 120
1966
Specification for cork rubber gasket materials
BS AU 121
1966
Specification for composition cork gasket materials
BS AU 122
1966
Specification for leathercloths
BS AU 123
1966
Specification for rubberized hair components
BS AU 124
1966
Specification for methods of test for body sealers
BS AU 125
1966
Specification for methods of test for panel damping materials
BS AU 126
1966
Specification for methods of test for steering wheel coverings
BS AU 127
1966
Specification for road vehicle laminated springs
BS AU 128
1967
Polarity identification marking of electrical components using earth return systems
BS AU 129
1967
Glossary of caravan terms
BS AU 130
1967
41/2 in diameter starter 24 volt d.c.
BS AU 131
1967
5 in diameter starter 24 volt d.c.
BS AU 132
1967
Starter ring gears for starter motors with bronze pinions
BS AU 133
1967
Starter ring gears for starter motors with steel pinions
BS AU 134
1967
Basic conditions for testing alternator performance
BS AU 135
1967
Alternator: 12 volt and 24 volt (single-lug swung-mounted: ventilated)
BS AU 136
1967
Alternator: 12 volt and 24 volt (two-lug swung-mounted: ventilated)
BS AU 137
1967
Towing vehicle, trailer and semi-trailer pneumatic braking systems. "Contact" type couplings
BS AU 139
1967
Dimensions for air pressure brake chamber
BS AU 142
1968
Specification for the performance of diesel engines for road vehicles
BS AU 151
1970
Specification for symbols for controls, indicators and tell-tales for road vehicles
BS AU 152
1970
Specification for retreaded car and commercial vehicle tyres
BS AU 153
1970
Specification for retroreflecting number plates
BS AU 156
1971
Specification for standard automatic roller-type coupling for semi-trailers not exceeding 71/4 tons laden weight
BS AU 161
1973
Methods of test for motor vehicle paints
BS AU 164
1977
Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 N (normal)
BS AU 166
1977
Specification for automotive V-belts and pulleys
BS AU 167
1978
Specification for electrical cable connectors: blade type
BS AU 168
1978
Specification for rear marking plates for vehicles
BS AU 170
1979
Specification for hydraulic trolley jacks
BS AU 171
1980
Specification for headlamps for pedal cycles
BS AU 173
1979
Recommendations for aiming of headlamps and auxiliary lamps on motor vehicles
BS AU 174-2
1985
Dimensions of a 'quick-detachable' coupling for use with single-line vacuum braking systems (upright) on trailers and semi-trailers
BS AU 174-1
1979
Specification for dimensions of 31/2 - 41/2 in diameter fifth wheel king pin for use with extra heavy duty semi-trailers
BS AU 175-4
1997
Dimensions of connections for flexible drives for instruments
BS AU 179
1981
Commercial vehicle tyre permanent repair chart
BS AU 180-2
1982
Control board for use with generators up to and including 7 in diameter
BS AU 180-4
1982
Flexible drives for speedometers
BS AU 180-5
1983
Specification for motor vehicle lighting and signalling equipment. Reflex reflectors for vehicles, including cycles
BS AU 180-6
1982
Specification for motor vehicle lighting and signalling equipment. Headlamps with prefocused filament lamps
BS AU 181
1982
Car tyre permanent repair chart
BS AU 182
1982
Specification for seat belt assemblies for motor vehicles
BS AU 183
1983
Vehicle lifts
BS AU 184
1982
Specification for headlamp optical aiming devices
BS AU 185
1983
Specification for pressure test connection for compressed-air pneumatic braking equipment for road vehicles
BS AU 187
2000
Specification for measurement of impact velocity in collision tests on road vehicles
BS AU 188
1983
Specification for performance requirements for original equipment jacks for passenger cars and light vans
BS AU 189
1983
Specification for road vehicles - mounting of mechanical coupling devices on rear cross members of trucks
BS AU 190
1983
Method for determination of the windscreen fogging characteristics of organic trim materials in motor vehicles
BS AU 192
1983
Methods for measurement of reflectance of rear view mirrors
BS AU 194
1984
Specification for alternative steering controls
BS AU 196
1984
Specification for performance requirements for accessory jacks for vehicles
BS AU 197
1984
Definitions for a three-dimensional reference system and fiducial marks
BS AU 198
1984
Hydraulic brake systems, using non-petroleum base brake fluids for road vehicles. Specification for non-petroleum base reference fluids
BS AU 201-2
1985
Dimensions of starter battery terminal posts: lug type (heavy commercial and public services vehicles)
BS AU 205
1986
Vehicle identification numbers (VIN). Specification for content and structure
BS AU 206-2
1986
Dimensions of starter battery terminal posts: lug type (agricultural tractors)
BS AU 206-1
1986
Specification for clearance dimensions and fifth wheel positions for tractors and semi-trailers
BS AU 206-3
1986
Specification for towing jaw for use between trailers of 5-16 tons gross weight and towing vehicle
BS AU 206-4
1986
Electrical cable connector. Tube type (171/2 amperes maximum continuous rating)
BS AU 207
1986
Vehicle identification numbers (VIN). Specification for world manufacturer identifier (WMI) codes
BS AU 208
1986
Vehicle identification numbers (VIN). Specification for location and attachment
BS AU 209-2
1988
Specification for electrical cable connectors (17.5 A maximum continuous rating)
BS AU 209-0
1996
Specification for dimensions of '50' fifth wheel king pin for semi-trailers
BS AU 209-3
1988
Specification for towing hook for use between trailers of 5-35 tons gross weight and towing vehicle
BS AU 209-7
1993
Specification for motor vehicle lighting and signalling equipment. Sealed beam headlamps
BS AU 209-8
1997
Rotating beacons
BS AU 210-2
1994
Dimensions of electrical cable connector: blade type, male (171/2 amperes maximum continuous rating)
BS AU 210-1
1987
Dimensions of the palm type coupling for use with pressure braking systems on trailers and semi-trailers
BS AU 211
1987
Method for establishment of eyellipses for driver's eye location
BS AU 213
1987
Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 S (supplementary)
BS AU 214-2
1988
Dimensions of electrical cable connector: blade type, male (35 amperes maximum continuous rating)
BS AU 214-3
1988
Specification for towing jaw for use between trailers of 5-35 tons gross weight and towing vehicle
BS AU 215-2
1987
Control box for 12 volt cut-out and voltage regulator
BS AU 215-1
1987
Specification for dimensions of a 'contact' type coupling for vacuum and pressure braking systems on trailers and semi-trailers
BS AU 215-3
1988
Specification for drawbar eyes and forecarriage pins for connection between trailers of 5-35 tons gross weight and towing vehicle
BS AU 216-1
1987
Dimensions of engine mounting pads for distributor securing levers
BS AU 217-2
1989
Control box for 12 volt cut-out and voltage regulator (exposed mounting)
BS AU 218
1987
Specification for road vehicle safety glass
BS AU 219
1988
Specification for dimensional codes for passenger cars
BS AU 220
1988
Brake linings. Method for measurement of internal shear strength of lining material
BS AU 221
1988
Brake linings. Method for measurement of shear strength of disc brake pad and drum brake shoe assemblies
BS AU 222
1988
Brake linings. Method for determining effects of heat on dimensions and form of disc brake pads
BS AU 225
1988
Brake linings. Method for determining resistance to water, saline solution, oil and brake fluid of brake lining material
BS AU 226
1988
Brake linings. Method for assessment of seizure to ferrous mating surface due to corrosion
BS AU 227
1988
Specification for interface dimensions for demountable vehicle body systems
BS AU 228-2
1989
Specification for dimensions of a distributor drive end
BS AU 229
1989
Specification for plastics safety glazing materials for use in road vehicles
BS AU 230
1989
Specification for world parts manufacturer identifier code (WPMI) for road vehicles
BS AU 231
1989
Specification for seat belt booster cushions
BS AU 232
1989
Specification for carry cot restraints
BS AU 233
1989
Tow rope assemblies for towing passenger cars and light vans
BS AU 234
1989
Specification for anchorages for towing ropes, cables or bars for road vehicles
BS AU 236
1990
Specification for interface dimensions and fixing bolts for the mounting of overrun devices on delta shaped drawbars of trailers up to 2000 kg
BS AU 238
1991
Glossary of terms for road vehicle collisions
BS AU 239
1991
Glossary of terms for masses and dimensions of caravans
BS AU 241
1991
Specification for replacement motor cycle and moped exhaust systems
BS AU 244
1992
Specification for performance of electrical connections between towing vehicles and trailers
BS AU 245
1992
Specification for mounting electrical connections on rear cross members of towing vehicles
BS AU 246
1992
Specification for electrical connections between 24 V trailer antilock braking systems and towing vehicles
BS AU 247
1993
Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 N (normal)
BS AU 248
1993
Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 S (supplementary)
BS AU 249
1993
Specification for location of hand controls, indicators and tell-tales in passenger cars
BS AU 250
1993
Spray reducing devices for heavy goods vehicles. Specification for performance of suppression material and devices, and air/water separating material and devices
BS AU 251
1994
Relays and flashers. Specification for mounting and positioning dimensions of male tabs and socket apertures for relays and flashers for road vehicles
BS AU 252
1993
Relays and flashers. Specification for arrangement and functional attribution of relay terminals for road vehicles
BS AU 253
1993
Specification for rearward-facing restraint systems for infants, for use in road vehicles
BS AU 256
1994
Method of test for effect of braking on steady state cornering behaviour of road vehicles
BS AU 258
1995
Diagnostic systems for road vehicles. Specification for graphical symbols for diagnostic testers
BS AU 259
1995
Diagnostic systems for road vehicles. Specification for general requirements for testing ignition systems
BS AU 260-4
1995
Specification for motor vehicle lighting and signalling equipment. Side, rear, parking, marker and stop lamps, and direction indicators
BS AU 261
1995
Specification for dimensions of car radio installation space
BS AU 262-3
1997
Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles)
BS AU 263
1995
Methods for assessment of sticking of automobile clutch facings
BS AU 264
1995
Vehicle security. Guide to the application of security devices/systems to vehicles
BS AU 265-1
1997
Combined switch and control board for use with generators up to and including 51/2 in diameter
BS AU 265-2
1995
Specification for towing connections for trailers up to 5000 kg gross mass
BS AU 266-1
1996
Combined switch and control board for use with generators up to and including 7 in diameter
BS AU 267
1998
Vehicle security. Specification for locking systems for passenger cars and car derived vehicles
BS AU 268
2003
Vehicle security. Specification for security systems against theft of in-car equipment for entertainment and communication purposes