All Carnegie Library of Pittsburgh locations will close at 5 pm on Wednesday, November 26 and will remain closed on Thursday, November 27.

Tools

Topics & Collections

small text medium text large text

BSI Standards List

Standard
Year
Title
BS EN 61702
2000
Rating of direct coupled photovoltaic (PV) pumping systems
BS EN 61703
2002
Mathematical expressions for reliability, availability, maintainability and maintenance support terms
BS EN 61709
2000
Electronic components. Reliability. Reference conditions for failure rates and stress models for conversion
BS EN 61721
2000
Susceptibility of a photovoltaic (PV) module to accidental impact damage (resistance to impact test)
BS EN 61724
1998
Photovoltaic system performance monitoring. Guidelines for measurement, data exchange and analysis
BS EN 61725
1997
Analytical expression for daily solar profiles
BS EN 61726
2000
Cable assemblies, cables, connectors and passive micStandardave components. Screening attenuation measurement by the reverberation chamber method
BS EN 61727
1996
Photovoltaic (PV) systems. Characteristics of the utility interface
BS EN 61733-1
1996
Measuring relays and protection equipment. Protection communication interfacing. General
BS EN 61744
2001
Calibration of fibre optic chromatic dispersion test sets
BS EN 61746
2005
Calibration of optical time-domain reflectometers (OTDRs)
BS EN 61747-1
2000
Liquid crystal and solid-state display devices. Generic specification
BS EN 61747-2
1999
Liquid crystal and solid-state display devices. Liquid crystal display modules. Sectional specification
BS EN 61747-2-1
2001
Liquid crystal and solid-state display devices. Passive matrix monochrome LCD modules. Blank detail specification
BS EN 61747-3
2000
Liquid crystal and solid-state display devices. Sectional specification for liquid crystal display (LCD) cells
BS EN 61747-4
1998
Liquid crystal and solid-state display devices. Liquid crystal display modules and cells. Essential ratings and characteristics
BS EN 61747-5
1998
Liquid crystal and solid-state display devices. Environmental, endurance and mechanical test methods
BS EN 61751
1998
Laser modules used for telecommunication. Reliability assessment
BS EN 61753-1-1
2001
Fibre optic interconnecting devices and passive components performance standard. General and guidance. Interconnecting devices (connectors)
BS EN 61753-2-1
2001
Fibre optic interconnecting devices and passive components performance standard. Fibre optic connectors terminated on single-mode fibre for category U. Uncontrolled environment
BS EN 61753-2-3
2001
Fibre optic interconnecting devices and passive components performance standard. Fibre optic connectors terminated on single-mode fibre for category U. Non connectorised single mode 1xN and 2xN non-wavelength-selective branching devices for category U. Un
BS EN 61753-021-2
2002
Fibre optic interconnecting devices and passive components performance standard. Fibre optic connectors terminated on single-mode fibre for category C. Controlled environment
BS EN 61753-022-2
2003
Fibre optic interconnecting devices and passive components performance standard. Fibre optic connectors terminated on multimode fibre for category C. Controlled environment
BS EN 61753-051-3
2002
Fibre optic interconnecting devices and passive components performance standard. Single-mode fibre, plug-style fixed attenuators for category U. Uncontrolled environment
BS EN 61753-052-3
2002
Fibre optic interconnecting devices and passive components performance standard. Single-mode fibre, pigtailed-style fixed attenuators for category U. Uncontrolled environment
BS EN 61754-1
1997
Fibre optic connector interfaces. General and guidance
BS EN 61754-2
1997
Fibre optic connector interfaces. Type BFOC/2,5 connector family
BS EN 61754-3
2002
Fibre optic connector interfaces. Type LSA connector family
BS EN 61754-4
1997
Fibre optic connector interfaces. Type SC connector family
BS EN 61754-4-1
2003
Fibre optic connector interfaces. Type SC connector family. Simplified receptacle SC-PC connector interfaces
BS EN 61754-5
2002
Fibre optic connector interfaces. Type MT connector family
BS EN 61754-6
1997
Fibre optic connector interfaces. Type MU connector family
BS EN 61754-6-1
2003
Fibre optic connector interfaces. Type MU connector family. Simplified receptacle MU-PC connector interfaces
BS EN 61754-7
2005
Fibre optic connector interfaces. Type MPO connector family
BS EN 61754-8
1997
Fibre optic connector interfaces. Type CF08 connector family
BS EN 61754-9
2001
Fibre optic connector interfaces. Type DS connector family
BS EN 61754-12
2000
Fibre optic connector interfaces. Type FS connector family
BS EN 61754-13
1999
Fibre optic connector interfaces. Type FC-PC connector family
BS EN 61754-15
2001
Fibre optic connector interfaces. Type LSH connector family
BS EN 61754-16
2000
Fibre optic connector interfaces. Type PN connector family
BS EN 61754-18
2002
Fibre optic connector interfaces. Type MT-RJ connector family
BS EN 61754-19
2002
Fibre optic connector interfaces. Type SG connector family
BS EN 61754-20
2002
Fibre optic connector interfaces. Type LC connector family
BS EN 61757-1
1999
Fibre optic sensors. Generic specification
BS EN 61760-1
1999
Surface mounting technology. Standard method for the specification of surface mounting components (SMDs)
BS EN 61760-2
1998
Surface mounting technology. Transportation and storage conditions of surface mounting devices (SMD). Application guide
BS EN 61770
2000
Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets
BS EN 61773
1997
Overhead lines. Testing of foundations for structures
BS EN 61779-2
2000
Electrical apparatus for the detection and measurement of flammable gases. Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in the air
BS EN 61779-3
2000
Electrical apparatus for the detection and measurement of flammable gases. Performance requirements for group I apparatus indicating a volume fraction up to 100% methane in air
BS EN 61779-4
2000
Electrical apparatus for the detection and measurement of flammable gases. Performance requirements for group II apparatus indicating a volume fraction up to 100% lower explosive limit
BS EN 61779-5
2000
Electrical apparatus for the detection and measurement of flammable gases. Performance requirements for group II apparatus indicating a volume fraction up to 100% gas
BS EN 61788-1
1998
Superconductivity. Critical current measurement. DC critical current of Cu/Nb-Ti composite superconductors
BS EN 61788-2
1999
Superconductivity. Critical current measurement. DC critical current of Nb3Sn composite superconductors
BS EN 61788-3
2001
Superconductivity. Critical current measurement. DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors
BS EN 61788-4
2001
Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti composite superconductors
BS EN 61788-5
2001
Superconductivity. Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-6
2001
Superconductivity. Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors
BS EN 61788-7
2002
Superconductivity. Electronic characteristic measurements. Surface resistance of superconductors at micStandardave frequencies
BS EN 61788-8
2003
Superconductivity. AC loss measurements. Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method
BS EN 61788-10
2002
Superconductivity. Critical temperature measurement. Critical temperature of Nb-Ti, Nb3Sn, and Bi-system oxide composite superconductors by a resistance method
BS EN 61788-11
2003
Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of Nb3Sn composite superconductors
BS EN 61788-12
2002
Superconductivity. Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
BS EN 61788-13
2003
Superconductivity. AC loss measurements. Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
BS EN 61797-1
1997
Transformers and inductors for use in telecommunication and electronic equipment. Main dimensions of coil formers. Coil formers for laminated cores
BS EN 61800-1
1998
Adjustable speed electrical power drive systems. Rating specifications for low voltage adjustable speed d.c. power drive systems
BS EN 61800-2
1998
Adjustable speed electrical power drive systems. General requirements. Rating specifications for low voltage adjustable frequency a.c. power drive systems
BS EN 61800-3
2004
Adjustable speed electrical power drive systems. EMC product standard including specific test methods
BS EN 61800-4
2003
Adjustable speed electrical power drive systems. General requirements. Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV
BS EN 61803
1999
Determination of power losses in high-voltage direct current (HVDC) converter stations
BS EN 61808
2001
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride button rechargeable single cells
BS EN 61809
2001
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for portable sealed alkaline secondary cells and batteries
BS EN 61810-1
2004
Electromechanical non-specified time all-or-nothing relays. General requirements
BS EN 61810-5
1999
Electromechanical non-specified time all-or-nothing relays. Insulation coordination
BS EN 61811-1
1999
Electromechanical non-specified time all-or-nothing relays of assessed quality. Generic specification
BS EN 61811-10
2003
Electromechanical all-or-nothing relays. Sectional specification. Relays for industrial application
BS EN 61811-11
2003
Electromechanical all-or-nothing relays. Blank detail specification. Relays for industrial application
BS EN 61811-50
2002
Electromechanical all-or-nothing relays. Sectional specification. Electromechanical all-or-nothing telecom relays of assessed quality
BS EN 61811-51
2002
Electromechanical all-or-nothing relays. Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Non-standardized types and construction
BS EN 61811-52
2002
Electromechanical all-or-nothing relays. Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 20 mm x 10 mm base
BS EN 61811-53
2002
Electromechanical all-or-nothing relays. Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 14 mm x 9 mm base
BS EN 61811-54
2002
Electromechanical non-specified time all-or-nothing relays of assessed quality. Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 15 mm x 7,5 mm base
BS EN 61811-55
2002
Electromechanical non-specified time all-or-nothing relays of assessed quality. Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 11 mm x 7,5 mm (max.) base
BS EN 61812-1
1997
Specified time relays for industrial use. Requirements and tests
BS EN 61817
2001
Household portable appliances for cooking, grilling and similar use. Methods for measuring performance
BS EN 61821
2003
Electrical installations for lighting and beaconing of aerodromes. Maintenance of aeronautical ground lighting constant current series circuits
BS EN 61822
2003
Electrical installations for lighting and beaconing of aerodromes. Constant current regulators
BS EN 61823
2003
Electrical installations for lighting and beaconing of aerodromes. AGL series transformers
BS EN 61828
2002
Ultrasonics. Focusing transducers. Definitions and measurement methods for the transmitted fields
BS EN 61829
1998
Crystalline silicon photovoltaic (PV) array. On-site measurement of I-V characteristics
BS EN 61830
1998
MicStandardave ferrite components. Measuring methods for major properties
BS EN 61834-1
1998
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). General specifications
BS EN 61834-3
2000
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). HD format for 1125-60 and 1250-50 systems
BS EN 61834-4
1998
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). Packheader table and the contents
BS EN 61834-5
1998
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). The character information system
BS EN 61834-7
2001
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). EDTV2 format
BS EN 61834-8
2001
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). PALplus format for the 625-50 system
BS EN 61834-9
2001
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). DVB format
BS EN 61834-10
2001
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). DTV format
BS EN 61835
1998
Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in) magnetic tape. Format D-5
BS EN 61837-1
1999
Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections. Plastic moulded enclosure outlines
BS EN 61837-2
2001
Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections. Ceramic enclosures
BS EN 61837-3
2001
Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections. Metal enclosures
BS EN 61842
2002
Microphones and earphones for speech communications
BS EN 61843
1997
Measuring method for the level of intermodulation products generated in a gyromagnetic device
BS EN 61846
1999
Ultrasonics. Pressure pulse lithotripters. Characteristics of fields
BS EN 61847
1998
Ultrasonics. Surgical systems. Measurement and declaration of the basic output characteristics
BS EN 61850-3
2002
Communication networks and systems in substations. General requirements
BS EN 61850-4
2002
Communication networks and systems in substations. System and project management
BS EN 61850-5
2003
Communication networks and systems in substations. Communication requirements for functions and device models
BS EN 61850-7-1
2003
Communication networks and systems in substations. Basic communication structure for substation and feeder equipment. Principles and models
BS EN 61850-7-2
2003
Communication networks and systems in substations. Basic communication structure for substation and feeder equipment. Abstract communication service interface (ACSI)
BS EN 61850-7-3
2003
Communication networks and systems in substations. Basic communication structure for substation and feeder equipment. Common data classes
BS EN 61850-7-4
2003
Communication networks and systems in substations. Basic communication structure for substation and feeder equipment. Compatible logical node classes and data classes
BS EN 61850-9-1
2003
Communication networks and systems in substations. Specific communication service mapping (SCSM). Sampled values over serial unidirectional multidrop point to point link
BS EN 61851-1
2001
Electric vehicle conductive charging system. General requirements
BS EN 61851-21
2002
Electric vehicle conductive charging system. Electric vehicle requirements for conductive connection to an a.c./d.c. supply
BS EN 61851-22
2002
Electric vehicle conductive charging system. A.C. electric vehicle charging station
BS EN 61854
1998
Overhead lines. Requirements and tests for spacers
BS EN 61855
2003
Household electrical hair care appliances. Methods of measuring the performance
BS EN 61857-1
2005
Electrical insulation systems. Procedures for thermal evaluation. General requirements. Low-voltage
BS EN 61857-21
2004
Electrical insulation systems. Procedures for thermal evaluation. Specific requirements for general-purpose model. Wire-wound applications
BS EN 61857-22
2002
Electrical insulation systems. Procedures for thermal evaluation. Specific requirements for encapsulated-coil model. Wire-wound electrical insulation system (EIS)
BS EN 61857-23
2002
Electrical insulation systems. Procedures for thermal evaluation. Specific requirements for general purpose, tall-channel model. Wire-wound electrical insulation system (EIS)
BS EN 61858
2005
Electrical insulation systems. Thermal evaluation of modifications to an established wire-wound EIS
BS EN 61860
2001
Dimension of low-profile cores made of magnetic oxides
BS EN 61866
1997
Audiovisual systems. Interactive text transmission system (ITTS)
BS EN 61868
1999
Mineral insulating oils. Determination of kinematic viscosity at very low temperatures
BS EN 61881
2000
Railway applications. Rolling stock equipment. Capacitors for power electronics
BS EN 61883-1
2003
Consumer audio/video equipment. Digital interface. General
BS EN 61883-2
2005
Consumer audio/video equipment. Digital interface. SD-DVCR data transmission
BS EN 61883-3
1998
Consumer audio/video equipment. Digital interface. HD-DVCR data transmission
BS EN 61883-4
1998
Consumer audio/video equipment. Digital interface. MPEG2-TS data transmission
BS EN 61883-5
1998
Consumer audio/video equipment. Digital interface. SDL-DVCR data transmission
BS EN 61883-6
2002
Consumer audio/video equipment. Digital interface. Audio and music data transmission protocol
BS EN 61883-7
2003
Consumer audio/video equipment. Digital interface. Transmission of ITU-R BO.1294 System B
BS EN 61897
1999
Overhead lines. Requirements and tests for Stockbridge type aeolian vibration dampers
BS EN 61904
2001
Video recording. Helical-scan digital component video cassette recording format using 12,65mm magnetic tape and incorporating data compression (Format digital-L)
BS EN 61909
2000
Audio recording. Minidisc system
BS EN 61921
2003
Power capacitors. Low-voltage power factor correction banks
BS EN 61926-1
2001
Design automation. Standard test language for all systems. Common abbreviated test language for all systems (C/ATLAS)
BS EN 61935-2
2003
Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173. Patch cords and work area cords
BS EN 61937
2001
Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958
BS EN 61937-4
2003
Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the MPEG audio format
BS EN 61937-5
2002
Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the DTS (Digital Theater Systems) format(s)
BS EN 61937-6
2002
Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the MPEG-2 AAC format
BS EN 61937-7
2005
Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the ATRAC and ATRAC 2/3 formats
BS EN 61938
1997
Audio, video and audiovisual systems. Interconnections and matching values. Preferred matching values of analogue signals
BS EN 61943
1999
Integrated circuits. Manufacturing line approval application guideline
BS EN 61947-1
2002
Electronic projection. Measurement and documentation of key performance criteria. Fixed resolution projectors
BS EN 61947-2
2002
Electronic projection. Measurement and documentation of key performance criteria. Variable resolution projectors
BS EN 61951-1
2003
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells. Nickel-cadmium
BS EN 61951-2
2003
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells. Nickel-metal hydride
BS EN 61952
2003
Insulators for overhead lines. Composite line post insulators for alternative current with a nominal voltage
BS EN 61953
1998
Diagnostic X-ray imaging equipment. Characteristics of mammographic anti-scatter grids
BS EN 61954
2000
Power electronics for electrical transmission and distribution systems. Testing of thyristor valves for static VAR compensators
BS EN 61958
2001
High-voltage prefabricated switchgear and controlgear assemblies. Voltage presence indicating systems
BS EN 61960-1
2001
Secondary lithium cells and batteries for portable applications. Secondary lithium cells
BS EN 61960-2
2002
Secondary lithium cells and batteries for portable applications. Secondary lithium batteries
BS EN 61964
1999
Integrated circuits. Memory devices pin configurations
BS EN 61965
2003
Mechanical safety of cathode ray tubes
BS EN 61966-2-1
2000
Multimedia systems and equipment. Colour measurement and management. Colour management. Default RGB colour space. sRGB
BS EN 61966-2-2
2003
Multimedia systems and equipment. Colour measurement and management. Colour management. Extended RGB colour space. scRGB
BS EN 61966-3
2000
Multimedia systems and equipment. Colour measurement and management. Equipment using cathode ray tubes
BS EN 61966-4
2000
Multimedia systems and equipment. Colour measurement and management. Equipment using liquid crystal display panels
BS EN 61966-5
2001
Multimedia systems and equipment. Colour measurement and management. Equipment using plasma display panels
BS EN 61966-7-1
2002
Multimedia systems and equipment. Colour measurement and management. Colour printers. Reflective prints. RGB inputs
BS EN 61966-8
2001
Multimedia systems and equipment. Colour measurement and management. Multimedia colour scanners
BS EN 61966-9
2004
Multimedia systems and equipment. Colour measurement and management. Digital cameras
BS EN 61967-1
2002
Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHz. General conditions and definitions
BS EN 61967-4
2002
Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHz. Measurement of conducted emissions. 1 ohm/150 ohm direct coupling method
BS EN 61967-5
2003
Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHz. Measurement of conducted emissions. Workbench Faraday Cage method
BS EN 61967-6
2002
Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHz. Measurement of conducted emissions. Magnetic probe method
BS EN 61968-1
2004
Application integration at electric utilities. System interfaces for distribution management. Interface architecture and general requirements
BS EN 61969-2-1
2000
Mechanical structures for electronic equipment. Outdoor enclosures. Detail specification. Dimensions for cabinets
BS EN 61969-2-2
2000
Mechanical structures for electronic equipment. Outdoor enclosures. Detail specification. Dimensions for cases
BS EN 61969-3
2001
Mechanical structures for electronic equipment. Outdoor enclosures. Sectional specification. Climatic, mechanical tests and safety aspects for cabinets and cases
BS EN 61977
2002
Fibre optic filters. Generic specification
BS EN 61978-1
2001
Fibre optic passive dispersion compensators. Generic specification
BS EN 61982-2
2002
Secondary batteries for the propulsion of electric road vehicles. Dynamic discharge performance test and dynamic endurance test
BS EN 61982-3
2001
Secondary batteries for the propulsion of electric road vehicles. Performance and life testing (traffic compatible, urban use vehicles)
BS EN 61984
2001
Connectors. Safety requirements and tests
BS EN 61986
2002
Rotating electrical machines. Equivalent loading and super-position techniques. Indirect testing to determine temperature rise
BS EN 61988-1
2003
Plasma display panels. Terminology and letter symbols
BS EN 61988-2-1
2002
Plasma display panels. Measuring methods. Optical
BS EN 61988-2-2
2003
Plasma display panels. Measuring methods. Optoelectrical
BS EN 61993-1
2001
Maritime navigation and radiocommunication equipment and systems. Shipborne automatic transponder system installation using VHF digital selective calling (DSC) techniques. Operational and performance requirements, methods of testing and required test resu
BS EN 61993-2
2002
Maritime navigation and radiocommunication equipment and systems. Class A shipborne equipment of the universal automatic identification system (AIS). Operational and performance requirements, methods of test and required test results
BS EN 61996
2001
Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR). Performance requirements. Methods of testing and required test results
BS EN 62005-1
2001
Reliability of fibre optic interconnecting devices and passive optical components. Introductory guide and definitions
BS EN 62005-2
2001
Reliability of fibre optic interconnecting devices and passive optical components. Quantitative assessment of reliability based on accelerated ageing tests. Temperature and humidity, steady state
BS EN 62005-3
2001
Reliability of fibre optic interconnecting devices and passive optical components. Relevant tests for evaluating failure modes and failure mechanisms for passive components
BS EN 62005-4
2000
Reliability of fibre optic interconnecting devices and passive optical components. Product screening
BS EN 62007-1
2000
Semiconductor optoelectronic devices for fibre optic system applications. Essential ratings and characteristics
BS EN 62007-2
2000
Semiconductor optoelectronic devices for fibre optic system applications. Measuring methods
BS EN 62011-1
2002
Insulating materials. Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes. Definitions, designations and general requirements
BS EN 62011-3-1
2003
Insulating materials. Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes. Tubes and rods of rectangular and hexagonal cross-section
BS EN 62012-1
2002
Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments. Generic specification
BS EN 62013-1
2002
Caplights for use in mines susceptible to firedamp. General requirements. Construction and testing in relation to the risk of explosion
BS EN 62013-2
2001
Caplights for use in mines susceptible to firedamp. Performance and other safety-related matters
BS EN 62014-1
2002
Electronic design automation libraries. Input/Output buffer information specifications (IBIS version 3.2)
BS EN 62018
2003
Power consumption of information technology equipment. Measurement methods
BS EN 62019
1999
Electrical accessories. Circuit-breakers and similar equipment for household use. Auxiliary contact units
BS EN 62020
1999
Electrical accessories. Residual current monitors for household and similar uses (RCMs)
BS EN 62021-1
2003
Insulating liquids. Determination of acidity. Automatic potentiometric titration
BS EN 62023
2001
Structuring of technical information and documentation
BS EN 62024-1
2002
High frequency inductive components. Electrical characteristics and measuring methods. Nanohenry range chip inductor
BS EN 62025-1
2002
High frequency inductive components. Non-electrical characteristics and measuring methods. Fixed, surface mounted inductors for use in electronic and telecommunication equipment
BS EN 62027
2001
Preparation of parts lists
BS EN 62035
2000
Discharge lamps (excluding fluorescent lamps). Safety specifications
BS EN 62037
2000
RF connectors, connector cable assemblies and cables. Intermodulation level measurement
BS EN 62040-1-1
2003
Uninterruptible power systems (UPS). General and safety requirements for UPS used in operator access areas
BS EN 62040-1-2
2003
Uninterruptible power systems (UPS). General and safety requirements for UPS used in restricted access locations
BS EN 62041
2003
Power transformers, power supply units, reactors and similar products. EMC requirements
BS EN 62044-1
2002
Cores made of soft magnetic materials. Measuring methods. Generic specification
BS EN 62044-3
2001
Cores made of soft magnetic materials. Measuring methods. Magnetic properties at high excitation level
BS EN 62052-11
2003
Electricity metering equipment (AC). General requirements, tests and test conditions. Metering equipment
BS EN 62053-11
2003
Electricity metering equipment (a.c.). Particular requirements. Electromechanical meters for active energy (classes 0,5, 1 and 2)
BS EN 62053-21
2003
Electricity metering equipment (a.c.). Particular requirements. Static meters for active energy (classes 1 and 2)
BS EN 62053-22
2003
Electricity metering equipment (a.c.). Particular requirements. Static meters for active energy (classes 0,2 S and 0,5 S)
BS EN 62053-23
2003
Electricity metering equipment (a.c.). Particular requirements. Static meters for reactive energy (classes 2 and 3)
BS EN 62053-31
1999
Electricity metering equipment (a.c.). Particular requirements. Pulse output devices for electromechanical and electronic meters (two wires only)
BS EN 62053-61
1999
Electricity metering equipment (a.c.). Particular requirements. Power consumption and voltage requirements
BS EN 62056-21
2002
Electricity metering. Data exchange for meter reading, tariff and load control. Direct local data exchange
BS EN 62056-31
2000
Electricity metering. Data exchange for meter reading, tariff and load control. Use of local area networks on twisted pair with carrier signalling
BS EN 62056-42
2002
Electricity metering. Data exchange for meter reading, tariff and load control. Physical layer services and procedures for connection-oriented asynchronous data exchange
BS EN 62056-46
2002
Electricity metering. Data exchange for meter reading, tariff and load control. Data link layer using HDLC protocol
BS EN 62056-53
2002
Electricity metering. Data exchange for meter reading, tariff and load control. COSEM application layer
BS EN 62056-61
2002
Electricity metering. Data exchange for meter reading, tariff and load control. Object identification system (OBIS)
BS EN 62056-62
2002
Electricity metering. Data exchange for meter reading, tariff and load control. Interface classes
BS EN 62065
2002
Maritime navigation and radiocommunication equipment and systems. Track control systems. Operational and performance requirements, methods of testing and required test results
BS EN 62068-1
2003
Electrical insulation systems. Electrical stresses produced by repetitive impulses. General method of evaluation of electrical endurance
BS EN 62070
2001
Broadcast digital video tape recorders. Identification method for recording and/or reproduction error status
BS EN 62071
2001
Helical-scan compressed digital video cassette recording system using 6,35mm magnetic tape. Forum D-7
BS EN 62077
2001
Fibre optic circulators. Generic specification
BS EN 62079
2001
Preparation of instructions. Structuring, content and presentation
BS EN 62083
2001
Medical electrical equipment. Requirements for the safety of radiotherapy treatment planning systems
BS EN 62090
2003
Product package labels for electronic components using bar code and two-dimensional symbologies
BS EN 62092
2002
Ultrasonics. Hydrophones. Characteristics and calibration in the frequency range from 15 MHz to 40 MHz
BS EN 62094-1
2003
Indicator light units for household and similar fixed-electrical installations. General requirements
BS EN 62099
2001
Fibre optic wavelength switches. Generic specification
BS EN 62105
2002
Digital audio broadcasting system. Specification of the receiver data interface (RDI)
BS EN 62106
2001
Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz
BS EN 62107
2002
Super video compact disc. Disc-interchange system-specification
BS EN 62114
2001
Electrical insulation systems (EIS). Thermal classification
BS EN 62121
2001
Methods of measurement for minidisc recorders/players
BS EN 62122
2002
Methods of measurement for consumer-use digital VTRs. Electronic and mechanical performances
BS EN 62133
2003
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
BS EN 62134-1
2002
Fibre optic enclosures. Generic specification
BS EN 62148-1
2002
Fibre optic active components and devices. Package and interface Standard. General and guidance
BS EN 62148-2
2003
Fibre optic active components and devices. Package and interface Standard. SFF MT-RJ 10-pin transceivers
BS EN 62148-3
2003
Fibre optic active components and devices. Package and interface Standard. SFF MT-RJ 20-pin transceivers
BS EN 62148-5
2003
Fibre optic active components and devices. Package and interface Standard. SC 1x9 fibre optic modules
BS EN 62148-6
2003
Fibre optic active components and devices. Package and interface Standard. ATM-PON transceivers
BS EN 62148-7
2003
Fibre optic active components and devices. Package and interface Standard. SFF LC 10-pin transceivers
BS EN 62148-8
2003
Fibre optic active components and devices. Package and interface Standard. SFF LC 20-pin transceivers
BS EN 62148-9
2003
Fibre optic active components and devices. Package and interface Standard. SFF MU duplex 10-pin transceivers
BS EN 62148-10
2003
Fibre optic active components and devices. Package and interface Standard. SFF MU duplex 20-pin transceivers
BS EN 62148-11
2003
Fibre optic active components and devices. Package and interface Standard. 14-pin modulator-integrated laser diode transmitters
BS EN 62149-1
2004
Fibre optic active components and devices. Performance Standard. General and guidance
BS EN 62149-4
2003
Fibre optic active components and devices. Performance Standard. 1300 nm fibre optic transceivers for Gigabit Ethernet application
BS EN 62149-5
2003
Fibre optic active components and devices. Performance Standard. ATM-PON transceivers with LD driver and CDR ICs
BS EN 62149-6
2003
Fibre optic active components and devices. Performance Standard. 650-nm 250-Mbit/s plastic optical fibre transceivers
BS EN 62153-1-1
2004
Metallic communication cables test methods. Electrical. Measurement of the pulse/step return loss in the frequency domain using the inverse discrete fourier transformation (IDFT)
BS EN 62153-4-2
2004
Metallic communication cables test methods. Electromagnetic compatibility (EMC). Screening and coupling attenuation. Injection clamp method
BS EN 62155
2003
Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
BS EN 62156
2001
Digital video recording with video compression 12,65 mm type D-9 component format 525/60 and 625/50 (digital S)
BS EN 62193
2003
Live working. Telescopic sticks and telescopic measuring sticks
BS EN 62208
2003
Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
BS EN 62211
2004
Inductive components. Reliability management
BS EN 62216-1
2002
Digital terrestrial television receivers for the DVB-T system. Baseline receiver specification
BS EN 62219
2002
Overhead electrical conductors. Formed wire, concentric lay, stranded conductors
BS EN 62220-1
2004
Medical electrical equipment. Characteristics of digital X-ray imaging devices. Determination of the detective quantum efficiency
BS EN 62246-1
2002
Reed contacts unit. Generic specification
BS EN 62259
2004
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Nickel-cadmium prismatic secondary single cells with partial gas recombination
BS EN 62262
2002
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
BS EN 62271-2
2003
High-voltage switchgear and controlgear. Seismic qualification for rated voltages of 72,5 kV and above
BS EN 62326-1
2002
Printed boards. Generic specification
BS EN 62326-4
1997
Printed boards. Rigid multilayer printed boards with interlayer connections. Sectional specification
BS EN 62326-4-1
1996
Printed boards. Rigid multilayer printed boards with interlayer connections. Sectional specification. Capability detail specification. Performance levels, A, B and C
BS EN 80416-1
2002
Basic principles for graphical symbols for use on equipment. Creation of symbol originals
BS EN 80416-2
2001
Basic principles for graphical symbols for use on equipment. Form and use of arStandards
BS EN 80416-3
2003
Basic principles for graphical symbols for use on equipment. Guidelines for the application of graphical symbols
BS EN 81714-2
1999
Design of graphical symbols for use in the technical documentation of products. Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange
BS EN 81714-3
2001
Design of graphical symbols for use in the technical documentation of products. Classification of connect nodes, networks and their encoding
BS EN 82045-1
2001
Document management. Principles and methods
BS EN 100012
1996
Harmonized system of quality assessment for electronic components. Basic specification. X-ray inspection of electronic components
BS EN 100015-2
1994
Basic specification. Protection of electrostatic sensitive devices. Requirements for low humidity conditions
BS EN 100015-3
1994
Basic specification. Protection of electrostatic sensitive devices. Requirements for clean room areas
BS EN 100015-4
1994
Basic specification. Protection of electrostatic sensitive devices. Requirements for high voltage environments
BS EN 100114-1
1997
Rule of Procedure 14. Quality assessment procedures. CECC requirements for the approval of an organization
BS EN 100114-6
1997
CECC Quality assessment procedure for electronic components. Technology approval of electronic component manufacturers
BS EN 112000
1997
Harmonized system of quality assessment for electronic components. Generic specification: image converter and image intensifier tubes
BS EN 116000-1
1996
Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays. General
BS EN 116000-2
1994
Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays. Generic data and methods of test for time delay relays
BS EN 116000-3
1996
Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays. Test and measurement procedures
BS EN 116200
1997
Harmonized system of quality assessment for electronic components. Sectional specification. Electromechanical all-or-nothing relays (including relays for severe environmental conditions)
BS EN 116300
1994
Harmonized system of quality assessment for electronic components. Sectional specification: electromechanical all-or-nothing heavy load relays of assessed quality (rated from 5A and above)
BS EN 116500
1996
Harmonized system of quality assessment for electronic components. Sectional specification: electromechanical all-or-nothing TELECOM relays of assessed quality
BS EN 117000
1997
Harmonized system of quality assessment for electronic components. Generic specification. Solid state all-or-nothing relays. Generic data and methods of test
BS EN 119000
1997
Harmonized system of quality assessment for electronic components. Generic specification: dry and mercury wetted reed contact units
BS EN 120000
1996
Harmonized system of quality assessment for electronic components. General specification: semiconductor optoelectronic and liquid crystal devices
BS EN 122110
1994
Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SMA
BS EN 122120
1996
Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series BNC
BS EN 122130
1994
Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SMB
BS EN 122140
1994
Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SMC
BS EN 122150
1996
Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series EIA Flange
BS EN 122160
1996
Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SSMA
BS EN 122170
1994
Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SSMB
BS EN 122180
1996
Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series SSMC
BS EN 122190
1996
Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series 7-16
BS EN 122200
1995
Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series TNC
BS EN 122340
2002
Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series MMCX
BS EN 123000
1992
Harmonized system of quality assessment for electronic components. Generic specification: printed boards
BS EN 123100
1992
Harmonized system of quality assessment for electronic components: Sectional specification: Single and double sided printed boards with plain holes
BS EN 123200
1992
Harmonized system of quality assessment for electronic components: Sectional specification: Single and double sided printed boards with plated through holes
BS EN 123300
1992
Specification for harmonized system of quality assessment for electronic components. Sectional specification. Multilayer printed boards
BS EN 123400
1992
Harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards without through connections
BS EN 123500
1992
Specification for harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards with through connections
BS EN 123600
1997
Harmonized system of quality assessment for electronic components. Sectional specification. Flex-rigid multilayer printed boards with through connections
BS EN 123700
1997
Harmonized system of quality assessment for electronic components. Sectional specification. Flex-rigid double sided printed boards with through connections
BS EN 123800
1997
Harmonized system of quality assessment for electronic components. Sectional specification. Flexible multilayer printed boards with through connections
BS EN 125000
1998
Harmonized system of quality assessment for electronic components. Generic specification: cores made of ferrite materials
BS EN 125100
1993
Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for inductor applications
BS EN 125200
1993
Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for linear transformers
BS EN 125400
1993
Harmonized system of quality assessment for electronic components: sectional specification: adjusters used with magnetic oxide cores for use in inductors and tuned transformers
BS EN 125500
1996
Harmonized system of quality assessment for electronic components. Sectional specification: magnetic oxide ring cores for interference suppression and low level signal transformer applications
BS EN 129000
1996
Harmonized system of quality assessment for electronic components. Generic specification. Fixed RF wound inductors
BS EN 129100
1995
Harmonized system of quality assessment for electronic components. Sectional specification: wirewound surface mounting inductors
BS EN 129101
1996
Harmonized system of quality assessment for electronic components. Blank detail specification: wirewound surface mounting inductors of assessed quality. Assessment level E
BS EN 129102
1996
Specification for harmonized system of quality assessment for electronic components. Blank detail specification: wirewound surface mounting inductors of assessed quality. Assessment level P
BS EN 129200
1996
Harmonized system of quality assessment for electronic components. Sectional specification: fixed inductors with ceramic or ferrite core wound with copper wire for RF circuits
BS EN 129201
1996
Specification for harmonized system of quality assessment for electronic components. Blank detail specification: wirewound inductors with ceramic or ferrite core. Assessment level E
BS EN 129202
1996
Specification for harmonized system of quality assessment for electronic components. Blank detail specification: wirebound inductors with ceramic or ferrite core. Assessment level P
BS EN 130000
1994
Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors
BS EN 130100
1998
Harmonized system of quality assessment for electronic components. Sectional specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current
BS EN 130101
1998
Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current. Assessment level E
BS EN 130102
1998
Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current. Assessment level EZ
BS EN 130200
1993
Harmonized system of quality assessment for electronic components. Sectional specification: fixed tantalum capacitors with non-solid or solid electrolyte
BS EN 130201
1999
Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed tantalum capacitors with solid electrolyte, porous anode (sub-family 3)
BS EN 130202
1998
Harmonized system of quality assessment for electronic components. Blank detail specification: fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2)
BS EN 130300
1998
Harmonized system of quality assessment for electronic components. Sectional specification:aluminium electrolytic capacitors with solid and non-solid electrolyte
BS EN 130301
2002
Harmonized system of quality assessment for electronic components. Blank Detail Specification. Aluminium electrolytic capacitors with non-solid electrolyte
BS EN 130500
1998
Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct current
BS EN 130501
1998
Harmonized system of quality assessment for electronic components. Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct current. Assessment level E
BS EN 130502
1998
Harmonized system of quality assessment for electronic components. Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct current. Assessment level EZ
BS EN 130800
2001
Harmonized system of quality assessment for electronic components. Sectional specification. Tantalum surface mounting capacitors
BS EN 130900
1998
Harmonized system of quality assessment for electronic components. Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors
BS EN 130901
1998
Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polystyrene film dielectric metal foil d.c. capacitors. Assessment level E
BS EN 130902
1998
Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polystyrene film dielectric metal foil d.c. capacitors. Assessment level EZ
BS EN 131200
2002
Harmonized system of quality assessment for electronic components. Sectional Specification. Fixed capacitors with metallized electrodes and polypropylene dielectric
BS EN 131201
2002
Blank detail specification: fixed capacitors with metallized electrodes and polypropylene dielectric
BS EN 131700
1998
Harmonized system of quality assessment for electronic components. Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
BS EN 131701
1998
Harmonized system of quality assessment for electronic components. Blank detail specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric. Assessment level E
BS EN 131702
1998
Harmonized system of quality assessment for electronic components. Blank detail specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric. Assessment level EZ
BS EN 131800
1998
Harmonized system of quality assessment for electronic components. Sectional specification: fixed polypropylene film dielectric metal foil d.c. capacitors
BS EN 131801
1998
Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polypropylene film dielectric metal foil d.c. capacitors. Assessment level E
BS EN 131802
1998
Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polypropylene film dielectric metal foil d.c. capacitors. Assessment level EZ
BS EN 132100
1997
Harmonized system of quality assessment for electronic components. Sectional specification: fixed mulitlayer ceramic surface mounting capacitors. Assessment levels EZ and DZ
BS EN 132101
1997
Blank detail specification. Fixed multilayer ceramic surface mounting capacitors. Assessment level EZ
BS EN 132102
1997
Blank detail specification. Fixed multilayer ceramic surface mounting capacitors. Assessment level DZ
BS EN 132400
1995
Harmonized system of quality assessment for electronic components. Sectional specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (Assessment Level D)
BS EN 133000
1997
Harmonized system of quality assessment for electronic components. Generic specification: passive filter units for electromagnetic interference suppression
BS EN 133100
1998
Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression. Filters for which safety tests are not required
BS EN 133101
1998
Harmonized system of quality assessment for electronic components. Blank detail specification:passive filter units for electromagnetic interference suppression. Filters for which safety tests are not required
BS EN 133200
1999
Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression (filters for which safety tests are required)
BS EN 133221
1998
Harmonized system of quality assessment for electronic components. Blank detail specification: passive filter units for electromagnetic interference suppression. Filters for which safety tests are required (safety tests only)
BS EN 134000
1995
Harmonized system of quality assessment for electronic components. Generic specification: variable capacitors. (Qualification approval and capability approval)
BS EN 134100
1996
Harmonized system of quality assessment for electronic components. Sectional specification: variable capacitors (Qualification approval)
BS EN 135000
1993
Harmonized system of quality assessment for electronic components. Generic specification: travelling wave amplifier tubes
BS EN 136000
1993
Harmonized system of quality assessment for electronic components: generic specification: magnetrons
BS EN 137000
1996
Harmonized system of quality assessment for electronic components. Generic specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors
BS EN 137100
1996
Harmonized system of quality assessment for electronic components. Sectional specification. Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications. Qualification approval
BS EN 140000
1995
Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors
BS EN 140100
1997
Harmonized system of quality assessment for electronic components. Sectional specification: fixed low power non-wire wound resistors
BS EN 140102
1996
Harmonized system of quality assessment for electronic components. Blank detail specification: fixed low power non-wirewound resistors (assessment level M)
BS EN 140103
1996
Harmonized system of quality assessment for electronic components. Blank detail specification. Fixed low power non-wirewound resistors (Assessment level P)
BS EN 140104
1996
Harmonized system of quality assessment for electronic components. Blank detail specification: fixed low power non-wirewound resistors (Assessment levels SB and SC)
BS EN 140200
1997
Harmonized system of quality assessment for electronic components. Sectional specification: fixed power resistors
BS EN 140202
1997
Harmonized system of quality assessment for electronic components. Blank detail specification: fixed power resistors (Assessment level M)
BS EN 140203
1997
Harmonized system of quality assessment for electronic components. Blank detail specification: fixed power resistors (Assessment level H)
BS EN 140210
1995
Harmonized system of quality assessment for electronic components. Sectional specification: fixed power resistors. Capability approval
BS EN 140400
2003
Harmonized system of quality assessment for electronic components. Sectional specification. Fixed low power surface mount (SMD) resistors
BS EN 140401
2002
Blank detail specification. Fixed low power non wire-wound surface mount (SMD) resistors
BS EN 140401-801
2002
Detail specification. Fixed low power non wire-wound surface mount (SMD) resistors. Rectangular. Stability classes 0,1; 0,25; 0,5; 1
BS EN 140401-802
2002
Detail specification. Fixed low power non wire-wound surface mount (SMD) resistors. Rectangular. Stability classes 1; 2
BS EN 140401-803
2002
Detail specification. Fixed low power non wire-wound surface mount (SMD) resistors. Cylindrical. Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2
BS EN 144000
1994
Harmonized system of quality assessment for electronic components. Generic specification: directly heated positive temperature coefficient thermistors typically made from modified ferro-electric materials
BS EN 153000
1998
Harmonized system of quality assessment for electronic components. Generic specification: discrete pressure contact power semiconductor devices (qualification approval)
BS EN 160000
1993
Harmonized system of quality assessment for electronic components. Generic specification: modular electronic units
BS EN 160100
1998
Harmonized system of quality assessment for electronic components. Sectional specification: capability approval of manufacturers of printed board assemblies of assessed quality
BS EN 160101
1998
Harmonized system of quality assessment for electronic components. Blank detail specification: printed board assembly modular electronic units of assessed quality. Capability approval
BS EN 160200-1
1998
Harmonized system of quality assessment for electronic components. Sectional specification. MicStandardave modular electronic units of assessed quality. Capability approval procedure
BS EN 160200-2
1998
Harmonized system of quality assessment for electronic components. Sectional specification. MicStandardave modular electronic units of assessed quality. Index of test methods
BS EN 160201
1998
Harmonized system of quality assessment for electronic components. Blank detail specification. MicStandardave modular electronic units of assessed quality. Capability approval
BS EN 165000-1
1996
Film and hybrid integrated circuits. Generic specification: capability approval procedure
BS EN 165000-2
1996
Film and hybrid integrated circuits. Internal visual inspection and special tests
BS EN 165000-3
1996
Film and hybrid integrated circuits. Self-audit checklist and report for film and hybrid integrated circuit manufacturers
BS EN 165000-4
1996
Film and hybrid integrated circuits. Customer information, product assessment level schedules and blank detail specification
BS EN 165000-5
1998
Film and hybrid integrated circuits. Procedure for qualification approval
BS EN 166000
1996
Harmonized system of quality assessment for electronic components. Generic specification. Surface acoustic wave (SAW) filters
BS EN 166100
1998
Harmonized system of quality assessment for electronic components. Sectional specification:surface acoustic wave (SAW) filters
BS EN 166101
1999
Harmonized system of quality assessment for electronic components. Blank detail specification: surface acoustic wave (SAW) filters. Capability approval
BS EN 167100
1996
Harmonized system of quality assessment for electronic components. Section specification: piezoelectric filters (Capability approval)
BS EN 167101
1996
Harmonized system of quality assessment for electronic components. Blank detail specification:piezoelectric filters (Capability approval)
BS EN 168000
1996
Harmonized system of quality assessment for electronic components. Generic specification: quartz crystal units
BS EN 168100
1995
Harmonized system of quality assessment for electronic components. Sectional specification: quartz crystal units (capability approval)
BS EN 168101
1997
Harmonized system of quality assessment for electronic components. Blank detail specification: quartz crystal units (capability approval)
BS EN 168200
1996
Harmonized system of quality assessment for electronic components. Sectional specification: quartz crystal units (qualification approval)
BS EN 168201
1996
Harmonized system of quality assessment for electronic components. Blank detail specification. Quartz crystal units. (Qualification approval)
BS EN 169000
1993
Harmonized system of quality assessment for electronic components. Generic specification. Quartz crystal controlled oscillators
BS EN 169200
1996
Harmonized system of quality assessment for electronic components. Sectional specification: Quartz crystal controlled oscillators (qualification approval)
BS EN 170000
1999
Harmonized system of quality assessment for electronic components. Generic specification: waveguide type dielectric resonators
BS EN 170100
2001
Harmonized system of quality assessment for electronic components. Sectional specification: Waveguide type dielectric resonators
BS EN 170101
2001
Harmonized system of quality assessment for electronic components. Blank detail specification. Waveguide type dielectric resonators. Capability approval
BS EN 171000
2001
Harmonized system of quality assessment for electronic components. Generic specification. Filters using waveguide type dielectric resonators
BS EN 175100
1993
Harmonized system of quality assessment for electronic components. Sectional specification. Two part and edge socket connectors for printed board applications
BS EN 175101-802
2000
Harmonized system of quality assessment for electronic components. Detail specification. Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 Standards
BS EN 175200
1997
Harmonized system of quality assessment for electronic components. Sectional specification: circular connectors
BS EN 175201-804
2000
Harmonized system of quality assessment for electronic components. Detail specification. Circular connectors. Round contacts, size diameter 1,6 mm, threaded coupling
BS EN 175300
1997
Harmonized system of quality assessment for electronic components. Sectional specification:rectangular connectors for frequencies below 3 MHz
BS EN 175301-801
2000
Harmonized system of quality assessment for electronic components. Detail specification. High density rectangular connectors, round removable crimp contacts
BS EN 175301-803
2000
Harmonized system of quality assessment for electronic components. Detail specification. Rectangular connectors. Flat contacts, 0,8 mm thickness, locking screw not detachable
BS EN 175500
1997
Harmonized system of quality assessment for electronic components. Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval
BS EN 181000
1995
Harmonized system of quality assessment for electronic components. Generic specification. Fibre optic branching devices
BS EN 181103
1998
Harmonized system of quality assessment for electronic components. Blank detail specification: fibre optic branching devices. Type: non wavelength selective transmissive star for telecommunication application
BS EN 181104
1998
Harmonized system of quality assessment for electronic components. Blank detail specification: fibre optic branching devices. Type: wavelength selective transmissive star for telecommunication application
BS EN 186000-1
1994
Harmonized system of quality assessment for electronic components. Generic specification. Connector sets for optical fibres and cables. Requirements, test methods and qualification approval procedures
BS EN 186100
1995
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Types F-SMA
BS EN 186110
1995
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type FC
BS EN 186130
1996
Harmonized system of quality assessment for electronic components. Sectional specification. Connector sets for optical fibres and cables. Type LSA
BS EN 186150
1997
Connector sets for optical fibres and cables. Type OCCA-BU
BS EN 186160
1997
Connector sets for optical fibres and cables. Type OCCA-PC
BS EN 186170
1998
Harmonized system of quality assessment for electronic components. Sectional specification:connector sets for optical fibres and cables. Type RCC
BS EN 186180
1996
Harmonized system of quality assessment for electronic components. Sectional specification. Connector sets for optical fibres and cables. Type LSB
BS EN 186210
1996
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type CF08
BS EN 186220
1996
Harmonized system of quality assessment for electronic components. Sectional specification: Connector sets for optical fibres and cables. Type LSC
BS EN 186230
1996
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type LSF
BS EN 186240
1996
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type MT
BS EN 186260
1998
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type SC
BS EN 186270
1998
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type LSH
BS EN 186290
1998
Harmonized system of quality assessment for electronic components. Connector sets for optical fibres and cables. Type MPO
BS EN 186300
1999
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables type MSC
BS EN 186310
1999
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type MF
BS EN 187000
1994
Generic specification for optical fibre cables
BS EN 187101
1995
Harmonized system of quality assessment for electronic components. Family specification: optical telecommunication cables to be used in ducts or direct buried application
BS EN 187102
1995
Harmonized system of quality assessment for electronic components. Family specification: optical aerial telecommunication cables
BS EN 187103
2003
Harmonized system of quality assessment for electronic components. Family specification. Optical fibre cables for indoor applications
BS EN 187104
2001
Harmonized system of quality assessment for electronic components. Family specification. Single-mode optical fibre cables to be used as underwater cables for lakes and river crossings, etc.
BS EN 187105
2002
Single mode optical cable (duct/direct buried installation)
BS EN 187200
2001
Harmonized systems of quality assessment for electronic components. Sectional specificaton. Optical cables to be used along electrical power lines (OCEPL)
BS EN 188000
1994
Generic specification for optical fibres
BS EN 188100
1995
Harmonized system of quality assessment for electronic components. Sectional specification: single-mode (SM) optical fibre
BS EN 188101
1995
Harmonized system of quality assessment for electronic components. Family specification: single-mode dispersion unshifted (B1.1) optical fibre
BS EN 188102
1996
Harmonized system of quality assessment for electronic components. Family specification: single-mode dispersion shifted (B2) optical fibre
BS EN 188200
1996
Harmonized system of quality assessment for electronic components. Sectional specification. Optical fibres A1 category graded index multimode
BS EN 188201
1996
Harmonized system of quality assessment for electronic components. Family specification: A1a graded index multimode optical fibres
BS EN 188202
1996
Harmonized system of quality assessment for electronic components. Family specification: A1b graded index multimode optical fibres
BS EN 190000
1996
Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits
BS EN 190100
1993
Harmonized system of quality assessment for electronic components: sectional specification: digital monolithic integrated circuits
BS EN 190116
1994
Harmonized system of quality assessment for electronic components. Family specification: AC MOS digital integrated circuits
BS EN 196000
1993
Harmonized system of quality assessment for electronic components. Generic specification. Electromechanical switches
BS EN 196103
2000
Blank detail specification: Rotary switches. Assessment level Y
BS EN 196403
2000
Harmonized systems of quality assessment for electronic components. Blank detail specification: push button switches. Assessment level Y
BS EN 196500
1993
Harmonized system of quality assessment for electronic components. Sectional specification. Membrane switches including blank detail specification EN 196501