All Carnegie Library of Pittsburgh locations will close at 5 pm on Wednesday, November 26 and will remain closed on Thursday, November 27.

Tools

Topics & Collections

small text medium text large text

BSI Standards List

Standard
Year
Title
BS EN ISO 8980-2
2004
Ophthalmic optics. Uncut finished spectacle lenses. Specifications for progressive power lenses
BS EN ISO 8980-3
2004
Ophthalmic optics. Uncut finished spectacle lenses. Transmittance specifications and test methods
BS EN ISO 8980-4
2000
Ophthalmic optics. Uncut finished spectacle lenses. Specifications and test methods for anti-reflective coatings
BS EN ISO 8980-1
2004
Ophthalmic optics. Uncut finished spectacle lenses. Specifications for single-vision and multifocal lenses
BS EN ISO 8985
1998
Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content
BS EN ISO 8986-1
1999
Plastics. Polybutene (PB) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 8986-2
1996
Plastics. Polybutene (PB) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 8987
2005
Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate
BS EN ISO 8988
1997
Plastics. Phenolic resins. Determination of hexamethylenetetramine content. Kjeldahl method and perchloric acid method
BS EN ISO 8989
1998
Plastics. Liquid phenolic resins. Determination of water miscibility
BS EN ISO 8990
1996
Thermal insulation. Determination of steady-state thermal transmission properties. Calibrated and guarded hot box
BS EN ISO 9000
2005
Quality management systems. Fundamentals and vocabulary
BS EN ISO 9000-1
1994
Quality management and quality assurance standards. Guidelines for selection and use
BS EN ISO 9000-3
1997
Quality management and quality assurance standards. Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software
BS EN ISO 9001
2000
Quality management systems. Requirements
BS EN ISO 9002
1994
Quality systems. Model for quality assurance in production, installation and servicing
BS EN ISO 9003
1994
Quality systems. Model for quality assurance in final inspection and test
BS EN ISO 9004
2000
Quality management systems. Guidelines for performance improvements
BS EN ISO 9013
2002
Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances
BS EN ISO 9018
2003
Destructive tests on welds in metallic materials. Tensile test on cruciform and lapped joints
BS EN ISO 9020
1998
Binders for paints and varnishes. Determination of free-formaldehyde content of amino resins. Sodium sulfite titrimetric method
BS EN ISO 9029
1995
Methods of test for petroleum and its products. Crude petroleum. Determination of water. Distillation method
BS EN ISO 9047
2003
Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants at variable temperatures
BS EN ISO 9054
1999
Cellular plastics, rigid. Test methods for self-skinned high-density materials
BS EN ISO 9073-2
1997
Textiles. Test methods for nonwovens. Determination of thickness
BS EN ISO 9073-4
1997
Textiles. Test methods for nonwovens. Determination of tear resistance
BS EN ISO 9073-6
2003
Textiles. Test methods for nonwovens. Absorption
BS EN ISO 9073-7
1998
Textiles. Test methods for nonwovens. Determination of bending length
BS EN ISO 9073-8
1998
Textiles. Test methods for nonwovens. Determination of liquid strike-through time (simulated urine)
BS EN ISO 9073-9
1998
Textiles. Test methods for nonwovens. Determination of drape coefficient
BS EN ISO 9080
2003
Plastics piping and ducting systems. Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
BS EN ISO 9093-1
1998
Small craft. Seacocks and through-hull fittings. Metallic
BS EN ISO 9093-2
2002
Small craft. Seacocks and through-hull fittings. Non-metallic
BS EN ISO 9094-1
2003
Small craft. Fire protection. Craft with a hull length of up to and including 15 m
BS EN ISO 9094-2
2002
Small craft. Fire protection. Craft with a hull length of over 15 m
BS EN ISO 9097
1995
Small craft. Electric fans
BS EN ISO 9142
2003
Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS EN ISO 9163
2005
Textile glass. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings
BS EN ISO 9167-2
1997
Rapeseed. Determination of glucosinolates content. Method using X-ray fluorescence spectrometry
BS EN ISO 9187-1
2003
Injection equipment for medical use. Ampoules for injectables
BS EN ISO 9187-2
1999
Injection equipment for medical use. One-point-cut (OPC) ampoules
BS EN ISO 9220
1995
Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
BS EN ISO 9222-1
1995
Technical drawings. Seals for dynamic application. General simplified representation
BS EN ISO 9222-2
1995
Technical drawings. Seals for dynamic application. Detailed simplified representation
BS EN ISO 9237
1995
Textiles. Determination of the permeability of fabrics to air
BS EN ISO 9239-1
2002
Reaction to fire tests. Horizontal surface spread of flame on floor-covering systems. Determination of the burning behaviour using a radiant heat source
BS EN ISO 9241-4
1998
Ergonomic requirements for office work with visual display terminals (VDTs). Keyboard requirements
BS EN ISO 9241-5
1999
Ergonomic requirements for office work with visual display terminals (VDTs). Workstation layout and postural requirements
BS EN ISO 9241-6
2000
Ergonomic requirements for office work with visual display terminals (VDTs). Guidance on the work environment
BS EN ISO 9241-7
1998
Ergonomic requirements for office work with visual display terminals (VDTs). Requirements for display with reflections
BS EN ISO 9241-8
1998
Ergonomic requirements for office work with visual display terminals (VDTs). Requirements for displayed colours
BS EN ISO 9241-9
2000
Ergonomic requirements for office work with visual display terminals (VDTs). Requirements for non-keyboard input devices
BS EN ISO 9241-10
1996
Ergonomic requirements for office work with visual display terminals (VDTs). Dialogue principles
BS EN ISO 9241-11
1998
Ergonomic requirements for office work with visual display terminals (VDTs). Guidance on usability
BS EN ISO 9241-12
1999
Ergonomic requirements for office work with visual display terminals (VDTs). Presentation of information
BS EN ISO 9241-13
1999
Ergonomic requirements for office work with visual display terminals (VDTs). User guidance
BS EN ISO 9241-14
2000
Ergonomic requirements for office work with visual display terminals (VDTs). Menu dialogues
BS EN ISO 9241-15
1998
Ergonomic requirements for office work with visual display terminals (VDTs). Command dialogues
BS EN ISO 9241-16
1999
Ergonomic requirements for office work with visual display terminals (VDTs). Direct manipulation dialogues
BS EN ISO 9241-17
1998
Ergonomic requirements for office work with visual display terminals (VDTs). Form-filling dialogues
BS EN ISO 9251
1996
Thermal insulation. Heat transfer. Conditions and properties of materials. Vocabulary
BS EN ISO 9283
1998
Manipulating industrial robots. Performance criteria and related test methods
BS EN ISO 9288
1996
Thermal insulation. Heat transfer by radiation. Physical quantities and definitions
BS EN ISO 9289
1995
Oilseed residues. Determination of free residual hexane
BS EN ISO 9300
2005
Measurement of gas flow by means of critical flow Venturi nozzles
BS EN ISO 9308-1
2000
Water quality. Detection and enumeration of Escherichia Coli and coliform bacteria in surface and waste water. Membrane filtration method
BS EN ISO 9308-3
1999
Water quality. Detection and enumeration of Escherichia Coli and coliform bacteria in surface and waste water. Miniaturized method (most probable number) for the detection and enumeration of E. coli in surface and waste water
BS EN ISO 9311-2
2002
Adhesives for thermoplastic piping systems. Determination of shear strength
BS EN ISO 9312
1995
Resistance welding equipment. Insulated pins for use in electrode back-ups
BS EN ISO 9337-1
2001
Contact lenses. Determination of back vertex power. Method using focimeter with manual focusing
BS EN ISO 9338
1998
Optics and optical instruments. Contact lenses. Determination of the diameters
BS EN ISO 9339-1
1998
Optics and optical instruments. Contact lenses. Determination of the thickness. Rigid contact lenses
BS EN ISO 9339-2
1998
Optics and optical instruments. Contact lenses. Determination of the thickness. Hydrogel contact lenses
BS EN ISO 9340
1999
Optics and optical instruments. Contact lenses. Determination of strains for rigid contact lenses
BS EN ISO 9341
1998
Optics and optical instruments. Contact lenses. Determination of inclusions and surface imperfections for rigid contact lenses
BS EN ISO 9346
1996
Thermal insulation. Mass transfer. Physical quantities and definitions
BS EN ISO 9360-1
2000
Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans. HMEs for use with minimum tidal volumes of 250 ml
BS EN ISO 9360-2
2002
Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans. HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
BS EN ISO 9363-1
1999
Optics and optical instruments. Contact lenses. Determination of cytotoxicity of contact lens material. Agar overlay test and gStandardth inhibition test
BS EN ISO 9369
1997
Plastics. Basic materials for polyurethanes. Pure isocyanates. Analysis of isocyanate groups
BS EN ISO 9377-2
2000
Water quality. Determination of hydrocarbon oil index. Method using solvent extraction and gas chromatography
BS EN ISO 9391
1995
Water quality. Sampling in deep water for macro-invertebrates. Guidance on the use of colonization, qualitative and quantitative samplers
BS EN ISO 9394
1998
Ophthalmic optics. Contact lenses and contact lens care products. Determination of biocompatibility by ocular study with rabbit eyes
BS EN ISO 9396
2001
Plastics. Phenolic resins. Determination of the gel time at a given temperature using automatic apparatus
BS EN ISO 9397
1997
Plastics. Phenolic resins. Determination of free-formaldehyde content. Hydroxylamine hydrochloride method
BS EN ISO 9400
1996
Nickel-based alloys. Determination of resistance to intergranular corrosion
BS EN ISO 9408
1999
Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer
BS EN ISO 9409-1
2004
Manipulating industrial robots. Mechanical interfaces. Plates (form A)
BS EN ISO 9431
1999
Construction drawings. Spaces for drawing and for text, and title blocks on drawing sheets
BS EN ISO 9439
2001
Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium. Carbon dioxide evolution test
BS EN ISO 9454-2
2001
Soft soldering fluxes. Classification and requirements. Performance requirements
BS EN ISO 9455-2
1996
Soft soldering fluxes. Test methods. Determination of non-volatile matter, ebulliometric method
BS EN ISO 9455-6
1997
Soft soldering fluxes. Test methods. Determination and detection of halide (excluding fluoride) content
BS EN ISO 9455-9
1996
Soft soldering fluxes. Test methods. Determination of ammonia content
BS EN ISO 9455-10
2001
Soft soldering fluxes. Test methods. Flux efficacy test, solder spread method
BS EN ISO 9455-13
2000
Soft soldering fluxes. Test methods. Determination of flux spattering
BS EN ISO 9455-15
2000
Soft soldering fluxes. Test methods. Copper corrosion test
BS EN ISO 9455-16
2001
Soft soldering fluxes. Test methods. Flux efficacy tests, wetting balance method
BS EN ISO 9456
1997
Optics and optical instruments. Opthalmic optics. Marking of spectacle frames
BS EN ISO 9488
2000
Solar energy. Vocabulary
BS EN ISO 9509
1995
Water quality. Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste water
BS EN ISO 9513
2002
Metallic materials. Calibration of extensometers used in uniaxial testing
BS EN ISO 9514
2005
Paints and varnishes. Determination of the pot-life of liquid systems. Preparation and conditioning of samples and guidelines for testing
BS EN ISO 9556
2001
Steel and iron. Determination of total carbon content. Infrared absorption method after combustion in an induction furnace
BS EN ISO 9606-3
1999
Approval testing of welders. Fusion welding. Copper and copper alloys
BS EN ISO 9606-4
1999
Approval testing of welders. Fusion welding. Nickel and nickel alloys
BS EN ISO 9606-5
2000
Approval testing of welders. Fusion welding. Titanium and titanium alloys, zirconium and zirconium alloys
BS EN ISO 9614-1
1995
Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement at discrete points
BS EN ISO 9614-2
1997
Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement by scanning
BS EN ISO 9626
1995
Stainless steel needle tubing for the manufacture of medical devices
BS EN ISO 9653
2000
Adhesives. Test method for shear strength of adhesive bonds (ISO 9653:1998)
BS EN ISO 9664
1995
Adhesives. Test methods for fatigue properties of structural adhesives in tensile shear
BS EN ISO 9665
2000
Adhesives. Animal glues. Methods of sampling and testing (ISO 9665:1998)
BS EN ISO 9680
1996
Specification for dental operating light
BS EN ISO 9687
1996
Dental equipment. Graphical symbols
BS EN ISO 9692-1
2003
Welding and allied processes. Joint preparation. Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels
BS EN ISO 9692-2
1998
Welding and allied processes. Joint preparation. Submerged arc welding of steels
BS EN ISO 9692-3
2001
Welding and allied processes. Joint preparation. Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
BS EN ISO 9692-4
2003
Welding and allied processes. Joint preparation. Clad steels
BS EN ISO 9693
2000
Metal-ceramic dental restorative systems
BS EN ISO 9694
1999
Dental phosphate-bonded casting investments
BS EN ISO 9702
1999
Plastics. Amine epoxide hardeners. Determination of primary, secondary and tertiary amine group nitrogen content
BS EN ISO 9703-3
1999
Anaesthetic and respiratory care alarm signals. Guidance on application of alarms
BS EN ISO 9706
2000
Information and documentation. Paper for documents. Requirements for permanence
BS EN ISO 9707
1995
Information and documentation. Statistics on the production and distribution of books, newspapers, periodicals and electronic publications
BS EN ISO 9771
1997
Plastics. Phenolic resins. Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
BS EN ISO 9773
1999
Plastics. Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
BS EN ISO 9787
1999
Manipulating industrial robots. Coordinate systems and motion nomenclatures
BS EN ISO 9801
1999
Ophthalmic instruments. Trial case lenses
BS EN ISO 9807
1997
Banking and related financial services. Requirements for message authentication (retail)
BS EN ISO 9831
2003
Animal feeding stuffs, animal products, and faeces or urine. Determination of gross calorific value. Bomb calorimeter method
BS EN ISO 9832
2003
Animal and vegetable fats and oils. Determination of residual technical hexane content
BS EN ISO 9856
2003
Conveyor belts. Determination of elastic and permanent elongation and calculation of elastic modulus
BS EN ISO 9863-2
1996
Geotextiles and geotextile-related products. Determination of thickness at specified pressures. Procedure for determination of thickness of single layers of multilayer products
BS EN ISO 9873
2000
Dental hand instruments. Reusable mirrors and handles
BS EN ISO 9875
2002
Ships and marine technology. Marine echo-sounding equipment
BS EN ISO 9876
1999
Ships and marine technology. Marine facsimile receivers for meteorological charts
BS EN ISO 9886
2004
Ergonomics. Evaluation of thermal strain by physiological measurements
BS EN ISO 9888
1999
Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium. Static test (Zahn-Wellens method)
BS EN ISO 9902-1
2001
Textile machinery. Noise test code. Common requirements
BS EN ISO 9902-2
2001
Textile machinery. Noise test code. Spinning preparatory and spinning machinery
BS EN ISO 9902-3
2001
Textile machinery. Noise test code. Nonwoven machines
BS EN ISO 9902-4
2001
Textile machinery. Noise test code. Yarn processing, cordage and rope manufacturing machines
BS EN ISO 9902-5
2001
Textile machinery. Noise test code. Weaving and knitting preparatory machinery
BS EN ISO 9902-6
2001
Textile machinery. Noise test code. Fabric manufacturing machines
BS EN ISO 9902-7
2001
Textile machinery. Noise test code. Dyeing and finishing machines
BS EN ISO 9905
1998
Technical specifications for centrifugal pumps. Class I
BS EN ISO 9906
2000
Rotodynamic pumps. Hydraulic performance acceptance tests. Grades 1 and 2
BS EN ISO 9908
1998
Technical specifications for centrifugal pumps. Class III
BS EN ISO 9913-1
1998
Optics and optical instruments. Contact lenses. Determination of oxygen permeability and transmissibility by the FATT method
BS EN ISO 9913-2
2000
Optics and optical instruments. Contact lenses. Determination of oxygen permeability and transmissibility by the coulometric method
BS EN ISO 9914
1997
Optics and optical instruments. Contact lenses. Determination of refractive index of contact lens materials
BS EN ISO 9917-1
2003
Dental water-based cements. Powder/liquid acid-base cements
BS EN ISO 9917-2
2000
Dental water-based cements. Light-activated cements
BS EN ISO 9921
2003
Ergonomics. Assessment of speech communication
BS EN ISO 9934-2
2002
Non-destructive testing. Magnetic particle testing. Detection media
BS EN ISO 9934-3
2002
Non-destructive testing. Magnetic particle testing. Equipment
BS EN ISO 9944
1995
Plastics. Phenolic resins. Determination of electrical conductivity of resin extracts
BS EN ISO 9946
1999
Manipulating industrial robots. Presentation of characteristics
BS EN ISO 9956-10
1997
Specification and approval of welding procedures for metallic materials. Welding procedure specification for electron beam welding
BS EN ISO 9956-11
1997
Specification and approval of welding procedures for metallic materials. Welding procedure specification for laser beam welding
BS EN ISO 9963-1
1996
Water quality. Determination of alkalinity. Determination of total and composite alkalinity
BS EN ISO 9963-2
1996
Water quality. Determination of alkalinity. Determination of carbonate alkalinity
BS EN ISO 9967
1995
Thermoplastics pipes. Determination of creep ratio
BS EN ISO 9969
1995
Thermoplastics pipes. Determination of ring stiffness
BS EN ISO 9974-1
2000
Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing. Threaded ports
BS EN ISO 9974-2
2000
Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing. Stud ends with elastomeric sealing (type E)
BS EN ISO 9974-3
2000
Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing. Stud ends with metal-to-metal sealing (type B)
BS EN ISO 9994
2002
Lighters. Safety specification
BS EN ISO 9997
2000
Dental cartridge syringes
BS EN ISO 10012
2003
Measurement management systems. Requirements for measurement processes and measuring equipment
BS EN ISO 10058
1996
Magnesites and dolomites. Chemical analysis
BS EN ISO 10062
1995
Corrosion test in artificial atmospheres at very low concentrations of polluting gas(es)
BS EN ISO 10066
1998
Flexible cellular polymeric materials. Determination of creep in compression
BS EN ISO 10075-1
2000
Ergonomic principles related to mental workload. General terms and definitions (ISO 10075:1991)
BS EN ISO 10075-2
2000
Ergonomic principles related to mental workload. Design principles
BS EN ISO 10077-1
2000
Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. Simplified method
BS EN ISO 10077-2
2003
Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. Numerical method for frames
BS EN ISO 10079-1
2000
Medical suction equipment. Electrically powered suction equipment. Safety requirements
BS EN ISO 10079-3
2000
Medical suction equipment. Suction equipment powered from a vacuum or pressure source
BS EN ISO 10082
2000
Plastics. Phenolic resins. Classification and test methods
BS EN ISO 10087
1996
Small craft. Hull identification. Coding system
BS EN ISO 10088
2001
Small craft. Permanently installed fuel systems and fixed fuel tanks
BS EN ISO 10093
1999
Plastics. Fire tests. Standard ignition sources
BS EN ISO 10101-1
1998
Natural gas. Determination of water by the Karl Fischer method. Introduction
BS EN ISO 10101-2
1998
Natural gas. Determination of water by the Karl Fischer method. Titration procedure
BS EN ISO 10101-3
1998
Natural gas. Determination of water by the Karl Fischer method. Coulometric procedure
BS EN ISO 10111
2002
Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods
BS EN ISO 10133
2001
Small craft. Electrical systems. Extra-low-voltage d.c. installations
BS EN ISO 10139-2
2001
Dentistry. Soft lining materials for removable dentures. Materials for long-term use
BS EN ISO 10202-3
1998
Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cards. Cryptographic key relationships
BS EN ISO 10202-6
1996
Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cards. Cardholder verification
BS EN ISO 10209-2
1996
Technical product documentation. Vocabulary. Terms relating to projection methods
BS EN ISO 10211-1
1996
Thermal bridges in building construction. Heat flows and surface temperatures. General calculation methods
BS EN ISO 10211-2
2001
Thermal bridges in building construction. Heat flows and surface temperatures. Linear thermal bridges
BS EN ISO 10239
2000
Small craft. Liquified petroleum gas (LPG) systems
BS EN ISO 10240
2004
Small craft. Owner's manual
BS EN ISO 10248
2000
Fluid fertilizers. De-aeration of suspension samples by film disentrainment
BS EN ISO 10249
2000
Fluid fertilizers. Preliminary visual examination and preparation of samples for physical testing
BS EN ISO 10253
1998
Water quality. Marine algal gStandardth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum
BS EN ISO 10256
2003
Head and face protection for use in ice hockey
BS EN ISO 10271
2001
Dental metallic materials. Corrosion test methods
BS EN ISO 10273
2003
Microbiology of food and animal feeding stuffs. Horizontal method for the detection of presumptive pathogenic Yersinia enterocolitica
BS EN ISO 10280
1995
Steel and iron. Determination of titanium content. Diantipyrylmethane spectrophotometric method
BS EN ISO 10289
2001
Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates. Rating of test specimens and manufactured articles subjected to corrosion tests
BS EN ISO 10301
1997
Water quality. Determination of highly volatile halogenated hydrocarbons. Gas-chromatographic methods
BS EN ISO 10303-210
2002
Industrial automation systems and integration. Product data representation and exchange. Application protocol. Electronic assembly, interconnection, and packaging design
BS EN ISO 10304-1
1995
Water quality. Determination of dissolved anions by liquid chromatography of ions. Determination of fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions. Method for water with low contamination
BS EN ISO 10304-2
1997
Water quality. Determination of dissolved anions by liquid chromatography of ions. Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
BS EN ISO 10304-3
1997
Water quality. Determination of dissolved anions by liquid chromatography of ions. Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate
BS EN ISO 10304-4
2000
Water quality. Determination of dissolved anions by liquid chromatography of ions. Determination of dissolved chlorate, chloride and chlorite in water with low contamination
BS EN ISO 10306
1995
Textiles. Cotton fibres. Evaluation of maturity by the air flow method
BS EN ISO 10308
1997
Metallic coatings. Review of porosity tests
BS EN ISO 10319
1996
Geotextiles. Wide-width tensile test
BS EN ISO 10320
1999
Geotextiles and geotextile-related products. Identification on site
BS EN ISO 10321
1996
Geotextiles. Tensile test for joints/seams by wide-width method
BS EN ISO 10322-1
1997
Ophthalmic optics. Semi-finished spectacle lens blanks. Specifications for single-vision and multifocal lens blanks
BS EN ISO 10322-2
1997
Ophthalmic optics. Semi-finished spectacle lens blanks. Specifications for progressive power lens blanks
BS EN ISO 10323
1996
Dental rotary instruments. Bore diameters for discs and wheels
BS EN ISO 10338
1998
Optics and optical instruments. Contact lenses. Determination of curvature
BS EN ISO 10340
1997
Optics and optical instruments. Contact lenses. Method for determination of solvent extractable substances
BS EN ISO 10341
1999
Ophthalmic instruments. Refractor heads
BS EN ISO 10342
2003
Ophthalmic instruments. Eye refractometers
BS EN ISO 10343
1999
Ophthalmic instruments. Ophthalmometers
BS EN ISO 10344
1998
Optics and optical instruments. Contact lenses. Saline solution for contact lens testing
BS EN ISO 10350-1
2001
Plastics. Acquisition and presentation of comparable single-point data. Moulding materials
BS EN ISO 10350-2
2001
Plastics. Acquisition and presentation of comparable single-point data. Long-fibre-reinforced plastic
BS EN ISO 10352
1997
Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area
BS EN ISO 10360-1
2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Vocabulary
BS EN ISO 10360-2
2002
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs used for measuring size
BS EN ISO 10360-3
2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs with the axis of the rotary table as the fourth axis
BS EN ISO 10360-4
2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs used in scanning measuring mode
BS EN ISO 10360-5
2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs using multiple stylus probing systems
BS EN ISO 10360-6
2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Estimation of errors in computing Gaussian associated features
BS EN ISO 10363
1995
Hot-melt adhesives. Determination of thermal stability
BS EN ISO 10365
1995
Adhesives. Designation of main failure patterns
BS EN ISO 10366-1
2002
Plastics. Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 10366-2
2003
Plastics. Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 10374
1998
Freight containers. Automatic identification
BS EN ISO 10418
2003
Petroleum and natural gas industries. Offshore production installations. Basic surface process safety systems
BS EN ISO 10423
2004
Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment
BS EN ISO 10426-1
2000
Petroleum and natural gas industries. Cements and materials for well cementing. Specification
BS EN ISO 10427-1
2002
Petroleum and natural gas industries. Casing centralizers. Bow-spring casing centralizers
BS EN ISO 10432
2004
Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
BS EN ISO 10437
2003
Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications
BS EN ISO 10438-1
2003
Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries. General requirements
BS EN ISO 10438-2
2003
Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries. Special-purpose oil systems
BS EN ISO 10438-3
2003
Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries. General-purpose oil systems
BS EN ISO 10438-4
2003
Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries. Self-acting gas seal support systems
BS EN ISO 10439
2002
Petroleum, chemical and gas service industries. Centrifugal compressors
BS EN ISO 10440-1
2001
Petroleum and natural gas industries. Rotary-type positive-displacement compressors. Process compressors (oil-free)
BS EN ISO 10441
1999
Petroleum and natural gas industries. Flexible couplings for mechanical power transmission. Special purpose applications
BS EN ISO 10442
2002
Petroleum, chemical and gas service industries. Packaged, integrally geared centrifugal air compressors
BS EN ISO 10451
2002
Dental implant systems. Contents of technical file
BS EN ISO 10456
2000
Building materials and products. Procedures for determining declared and design thermal values
BS EN ISO 10472-1
1998
Safety requirements for industrial laundry machinery. Common requirements
BS EN ISO 10472-3
1998
Safety requirements for industrial laundry machinery. Washing tunnel lines including component machines
BS EN ISO 10472-4
1998
Safety requirements for industrial laundry machinery. Air dryers
BS EN ISO 10472-5
1998
Safety requirements for industrial laundry machinery. Flatwork ironers, feeders and folders
BS EN ISO 10472-6
1998
Safety requirements for industrial laundry machinery. Ironing and fusing presses
BS EN ISO 10477
1996
Dentistry. Polymer-based cStandardn and bridge materials
BS EN ISO 10504
2000
Starch derivatives. Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups. Method using high-performance liquid chromatography
BS EN ISO 10510
2000
Tapping screw and washer assemblies with plain washers
BS EN ISO 10511
1998
Prevailing torque type hexagon thin nuts (with non-metallic insert)
BS EN ISO 10512
1998
Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread. Property classes 6, 8 and 10
BS EN ISO 10513
1998
Prevailing torque type all-metal hexagon nut, style 2, with metric fine pitch thread. Property classes 8, 10 and 12
BS EN ISO 10519
2001
Rapeseed. Determination of chlorophyll content. Spectrometric method
BS EN ISO 10520
1998
Native starch. Determination of starch content. Ewers polarimetric method
BS EN ISO 10528
1995
Textiles. Commercial laundering procedure for textile fabrics prior to flammability testing
BS EN ISO 10534-1
2001
Acoustics. Determination of sound absorption coefficient and impedance in impedances tubes. Method using standing wave ratio
BS EN ISO 10534-2
2001
Acoustics. Determination of sound absorption coefficient and impedance in impedance tubes. Transfer-function method
BS EN ISO 10535
1998
Hoists for the transfer of disabled persons. Requirements and test methods
BS EN ISO 10536-1
2000
Identification cards. Contactless integrated circuit(s) cards. Physical characteristics
BS EN ISO 10539
2002
Animal and vegetable fats and oils. Determination of alkalinity
BS EN ISO 10545-1
1997
Ceramic tiles. Sampling and basis for acceptance
BS EN ISO 10545-2
1997
Ceramic tiles. Determination of dimensions and surface quality
BS EN ISO 10545-3
1997
Ceramic tiles. Determination of water absorption, apparent porosity, apparent relative density and bulk density
BS EN ISO 10545-4
1997
Ceramic tiles. Determination of modulus of rupture and breaking strength
BS EN ISO 10545-5
1998
Ceramic tiles. Determination of impact resistance by measurement of coefficient of restitution
BS EN ISO 10545-6
1997
Ceramic tiles. Determination of resistance to deep abrasion for unglazed tiles
BS EN ISO 10545-7
1999
Ceramic tiles. Determination of resistance to surface abrasion for glazed tiles
BS EN ISO 10545-8
1996
Ceramic tiles. Determination of linear thermal expansion
BS EN ISO 10545-9
1996
Ceramic tiles. Determination of resistance to thermal shock
BS EN ISO 10545-10
1997
Ceramic tiles. Determination of moisture expansion
BS EN ISO 10545-11
1996
Ceramic tiles. Determination of crazing resistance for glazed tiles
BS EN ISO 10545-12
1997
Ceramic tiles. Determination of frost resistance
BS EN ISO 10545-13
1997
Ceramic tiles. Determination of chemical resistance
BS EN ISO 10545-14
1997
Ceramic tiles. Determination of resistance to stains
BS EN ISO 10545-15
1997
Ceramic tiles. Determination of lead and cadmium given off by glazed tiles
BS EN ISO 10545-16
2000
Ceramic tiles. Determination of small colour differences
BS EN ISO 10548
2003
Carbon fibre. Determination of size content
BS EN ISO 10551
2001
Ergonomics of the thermal environment. Assessment of the influence of the thermal environment using subjective judgement scales
BS EN ISO 10555-1
1997
Sterile, single-use intravascular catheters. General requirements
BS EN ISO 10555-2
1997
Sterile, single-use intravascular catheters. Angiographic catheters
BS EN ISO 10555-3
1997
Sterile, single-use intravascular catheters. Central venous catheters
BS EN ISO 10563
2005
Building construction. Sealants for joints. Determination of change in mass and volume
BS EN ISO 10564
1997
Soldering and brazing materials. Methods for the sampling of soft solders for analysis
BS EN ISO 10565
1998
Oilseeds. Simultaneous determination of oil and water contents. Methods using pulsed nuclear magnetic resonance spectrometry
BS EN ISO 10590
2005
Building construction. Sealants. Determination of adhesion/cohesion properties at maintained extension after immersion in water
BS EN ISO 10591
2005
Building construction. Sealants. Determination of adhesion/cohesion properties after immersion in water
BS EN ISO 10592
1995
Small craft. Hydraulic steering systems
BS EN ISO 10618
2000
Carbon fibre. Determination of tensile properties of resin-impregnated yarns
BS EN ISO 10628
2001
Flow diagrams for process plants. General rules
BS EN ISO 10634
1996
Water quality. Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium
BS EN ISO 10637
2000
Dental equipment. High and medium volume suction systems
BS EN ISO 10642
2004
Hexagon socket countersunk head screws
BS EN ISO 10644
1998
Screw and washer assemblies with plain washers. Washer hardness classes 200 HV and 300 HV
BS EN ISO 10651-4
2002
Lung ventilators. Particular requirements for operator-powered resuscitators
BS EN ISO 10664
2005
Hexalobular internal driving feature for bolts and screws
BS EN ISO 10666
1999
Drilling screws with tapping screw threads. Mechanical and functional properties
BS EN ISO 10669
1999
Plain washers for tapping screw and washer assemblies. Normal and large series. Product grade A
BS EN ISO 10673
1999
Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A
BS EN ISO 10683
2000
Fasteners. Non-electrolytically applied zinc flake coatings
BS EN ISO 10692-1
2001
Gas cylinders. Gas cylinder valve connections for use in the microelectronics industry. Outlet connections
BS EN ISO 10692-2
2001
Gas cylinders. Gas cylinder valve connections for use in the microelectronics industry. Specification and type testing for valve to cylinder connections
BS EN ISO 10695
2000
Water quality. Determination of selected organic nitrogen and phosphorus compounds. Gas chromatographic methods
BS EN ISO 10700
1995
Steel and iron. Determination of manganese content. Flame atomic absorption spectrometric method
BS EN ISO 10705-1
2001
Water quality. Detection and enumeration of bacteriophages. Detection and enumeration of bacteriophages. Enumeration of F-specific RNA bacteriophages
BS EN ISO 10705-2
2001
Water quality. Detection and enumeration of bacteriophages. Enumeration of somatic coliphages
BS EN ISO 10707
1998
Water quality. Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds. Method by analysis of biochemical oxygen demand (closed bottle test)
BS EN ISO 10712
1996
Water quality. Pseudomonas putida gStandardth inhibition test (Pseudomonas cell multiplication inhibition test)
BS EN ISO 10714
2002
Steel and iron. Determination of phosphorus content. Phosphovanadomolybdate spectrophotometric method
BS EN ISO 10715
2001
Natural gas. Sampling guidelines
BS EN ISO 10723
2002
Natural gas. Performance evaluation for on-line analytical systems
BS EN ISO 10724-1
2001
Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). General principles and moulding of multipurpose test specimens
BS EN ISO 10724-2
2001
Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). Small plates
BS EN ISO 10806
2003
Pipework. Fittings for corrugated metal hoses
BS EN ISO 10807
1997
Pipework. Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere
BS EN ISO 10819
1997
Mechanical vibration and shock. Hand-arm vibration. Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
BS EN ISO 10846-1
1999
Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Principles and guidelines
BS EN ISO 10846-2
1999
Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Dynamic stiffness of elastic supports for translatory motion. Direct method
BS EN ISO 10846-4
2003
Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Dynamic stiffness of elements other than resilient supports for translatory motion
BS EN ISO 10882-1
2001
Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone. Sampling of airborne particles
BS EN ISO 10882-2
2000
Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone. Sampling of gases
BS EN ISO 10938
1998
Ophthalmic instruments. Chart projectors
BS EN ISO 10939
1998
Ophthalmic instruments. Slit-lamp microscopes
BS EN ISO 10940
1998
Ophthalmic instruments. Fundus cameras
BS EN ISO 10942
1998
Ophthalmic instruments. Direct ophthalmoscopes
BS EN ISO 10943
1998
Ophthalmic instruments. Indirect ophthalmoscopes
BS EN ISO 10944
1998
Ophthalmic optics. Synoptophores
BS EN ISO 10960
1997
Rubber and plastic hoses. Assessment of ozone resistance under dynamic conditions
BS EN ISO 10964
1997
Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners
BS EN ISO 10993-1
2003
Biological evaluation of medical devices. Evaluation and testing
BS EN ISO 10993-2
1998
Biological evaluation of medical devices. Animal welfare requirements
BS EN ISO 10993-3
2003
Biological evaluation of medical devices. Tests for genotoxicity, carcinogenicity and reproductive toxicity
BS EN ISO 10993-4
2002
Biological evaluation of medical devices. Selection of tests for interactions with blood
BS EN ISO 10993-5
1999
Biological evaluation of medical devices. Tests for in vitro cytotoxicity
BS EN ISO 10993-7
1996
Biological evaluation of medical devices. Ethylene oxide sterilization residuals
BS EN ISO 10993-8
2001
Biological evaluation of medical devices. Selection and qualification of reference materials for biological tests
BS EN ISO 10993-9
1999
Biological evaluation of medical devices. Framework for identification and quantification of potential degradation products
BS EN ISO 10993-10
2002
Biological evaluation of medical devices. Tests for irritation and delayed-type hypersensitivity
BS EN ISO 10993-11
1996
Biological evaluation of medical devices. Tests for systemic toxicity
BS EN ISO 10993-12
2004
Biological evaluation of medical devices. Sample preparation and reference materials
BS EN ISO 10993-13
1999
Biological evaluation of medical devices. Identification and quantification of degradation products from polymeric medical devices
BS EN ISO 10993-14
2001
Biological evaluation of medical devices. Identification and quantification of degradation products from ceramics
BS EN ISO 10993-15
2001
Biological evaluation of medical devices. Identification and quantification of degradation products from metals and alloys
BS EN ISO 10993-16
1997
Biological evaluation of medical devices. Toxicokinetic study design for degradation products and leachables
BS EN ISO 10993-17
2002
Biological evaluation of medical devices. Establishment of allowable limits for leachable substances
BS EN ISO 11058
1999
Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, without load
BS EN ISO 11064-1
2001
Ergonomic design of control centres. Principles for the design of control centres
BS EN ISO 11064-2
2001
Ergonomic design of control centres. Principles for the arrangement of control suites
BS EN ISO 11064-3
2000
Ergonomic design of control centres. Control room layout
BS EN ISO 11070
1999
Sterile, single-use intravascular catheter introducers
BS EN ISO 11091
1999
Construction drawings. Landscape drawing practice
BS EN ISO 11102-1
1997
Reciprocating internal combustion engines. Handle starting equipment. Safety requirements and tests
BS EN ISO 11102-2
1997
Reciprocating internal combustion engines. Handle starting equipment. Method of testing the angle of disengagement
BS EN ISO 11105
1997
Small craft. Ventilation of petrol engine and/or petrol tank compartments
BS EN ISO 11114-1
1998
Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Metallic materials
BS EN ISO 11114-2
2001
Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Non-metallic materials
BS EN ISO 11114-3
1998
Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Autogenous ignition test in oxygen atmosphere
BS EN ISO 11116-2
1999
Gas cylinders. 17E taper thread for connection of valves to gas cylinders. Inspection gauges
BS EN ISO 11116-1
1999
Gas cylinders. 17E taper thread for connection of valves to gas cylinders. Specifications
BS EN ISO 11120
1999
Gas cylinders. Refillable seamless steel tubes for compressed gas transport, of water capacity between 150l and 3000l. Design, construction and testing
BS EN ISO 11124-1
1997
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. General introduction and classification
BS EN ISO 11124-2
1997
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Chilled-iron grit
BS EN ISO 11124-3
1997
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. High-carbon cast-steel shot and grit
BS EN ISO 11124-4
1997
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Low-carbon cast-steel shot
BS EN ISO 11125-1
1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Sampling
BS EN ISO 11125-2
1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of particle size distribution
BS EN ISO 11125-3
1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of hardness
BS EN ISO 11125-4
1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of apparent density
BS EN ISO 11125-5
1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of percentage defective particles and of microstructure
BS EN ISO 11125-6
1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of foreign matter
BS EN ISO 11125-7
1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of moisture
BS EN ISO 11126-1
1997
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. General introduction and classification
BS EN ISO 11126-3
1998
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Copper refinery slag
BS EN ISO 11126-4
1998
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Coal furnace slag
BS EN ISO 11126-5
1998
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Nickel refinery slag
BS EN ISO 11126-6
1998
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Iron furnace slag
BS EN ISO 11126-7
2001
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Specification for fused aluminium oxide
BS EN ISO 11126-8
1998
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Olivine sand
BS EN ISO 11127-1
1998
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Sampling
BS EN ISO 11127-2
1998
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of particle size distribution
BS EN ISO 11127-4
1998
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Assessment of hardness by a glass slide test
BS EN ISO 11127-5
1998
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of moisture
BS EN ISO 11127-6
1998
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of water-soluble contaminants by conductivity measurement
BS EN ISO 11127-7
1998
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of water-soluble chlorides
BS EN ISO 11130
1999
Corrosion of metals and alloys. Alternate immersion test in salt solution
BS EN ISO 11143
2000
Dental equipment. Amalgam separators
BS EN ISO 11144
1997
Dental equipment. Connections for supply and waste lines
BS EN ISO 11145
2001
Optics and optical instruments. Lasers and laser-related equipment. Vocabulary and symbols
BS EN ISO 11149
1997
Optics and optical instruments. Lasers and laser related equipment. Fibre optic connectors for non-telecommunication laser applications
BS EN ISO 11151-1
2000
Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
BS EN ISO 11151-2
2000
Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range
BS EN ISO 11196
1997
Anaesthetic gas monitors
BS EN ISO 11199-1
1999
Walking aids manipulated by both arms. Requirements and test methods. Walking frames
BS EN ISO 11200
1996
Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
BS EN ISO 11201
1996
Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Engineering method in an essentially free field over a reflecting plane
BS EN ISO 11202
1996
Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Survey method in situ
BS EN ISO 11203
1996
Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
BS EN ISO 11204
1996
Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Method requiring environmental corrections
BS EN ISO 11205
2003
Acoustics. Noise emitted by machinery and equipment. Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
BS EN ISO 11210
1995
Determination of platinum in platinum jewellery alloys. Gravimetric method after precipitation of diammonium hexachloroplatinate
BS EN ISO 11212-1
1997
Starch and derived products. Heavy metals content. Determination of arsenic content by atomic absorption spectrometry
BS EN ISO 11212-2
1997
Starch and derived products. Heavy metals content. Determination of mercury content by atomic absorption spectrometry
BS EN ISO 11212-3
1997
Starch and derived products. Heavy metals content. Determination of lead content by atomic absorption spectrometry with electrothermal atomization
BS EN ISO 11212-4
1997
Starch and derived products. Heavy metals content. Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization
BS EN ISO 11213
1995
Modified starch. Determination of acetyl content. Enzymatic method
BS EN ISO 11214
1996
Modified starch. Determination of carboxyl group content of oxidized starch
BS EN ISO 11215
1998
Modified starch. Determination of adipic acid content of acetylated di-starch adipates. Gas-chromatographic method
BS EN ISO 11216
1998
Modified starch. Determination of content of carboxymethyl groups in carboxymethyl starch
BS EN ISO 11244
2000
Dental brazing investments
BS EN ISO 11245
2000
Dental restorations. Phosphate-bonded refractory die materials
BS EN ISO 11246
2000
Dental ethyl silicate bonded casting investments
BS EN ISO 11248
2000
Plastics. Thermosetting moulding materials. Evaluation of short-term performance at elevated temperatures
BS EN ISO 11290-1
1997
Microbiology of food and animal feeding stuffs. Horizontal method for the detection and enumeration of Listeria monocytogenes. Detection method
BS EN ISO 11290-2
1998
Microbiology of food and animal feeding stuffs. Horizontal method for the detection and enumeration of Listeria monocytogenes. Enumeration method
BS EN ISO 11306
1998
Corrosion of metals and alloys. Guidelines for exposing and evaluating metals and alloys in surface sea water
BS EN ISO 11334-1
1997
Walking aids manipulated by one arm. Requirements and test methods. Elbow crutches
BS EN ISO 11334-4
1999
Walking aids manipulated by one arm. Requirements and test methods. Walking sticks with three or more legs
BS EN ISO 11341
2004
Paints and varnishes. Artificial weathering and exposure to artificial radiation. Exposure to filtered xenon-arc radiation
BS EN ISO 11348-2
1999
Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using liquid-dried bacteria
BS EN ISO 11348-3
1999
Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using freeze-dried bacteria
BS EN ISO 11348-1
1999
Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using freshly prepared bacteria
BS EN ISO 11357-1
1997
Plastics. Differential scanning calorimetry (DSC). General principles
BS EN ISO 11358
1997
Plastics. Thermogravimetry (TG) of polymers. General principles
BS EN ISO 11369
1997
Water quality. Determination of selected plant treatment agents. Method using high performance liquid chromatography with UV detection after solid-liquid extraction
BS EN ISO 11376
2001
Plastics. Epoxy resins and glycidyl esters. Determination of inorganic chlorine
BS EN ISO 11378-2
2001
Textile floor coverings. Laboratory soiling tests. Drum test
BS EN ISO 11380
1997
Optics and optical instruments. Ophthalmic optics. Formers
BS EN ISO 11381
1997
Optics and optical instruments. Ophthalmic optics. Screw threads
BS EN ISO 11399
2001
Ergonomics of the thermal environment. Principles and application of relevant International standards
BS EN ISO 11401
1998
Plastics. Phenolic resins. Separation by liquid chromatography
BS EN ISO 11402
2005
Plastics. Condensation resins. Determination of free formaldehyde
BS EN ISO 11403-1
2003
Plastics. Acquisition and presentation of comparable multipoint data. Mechanical properties
BS EN ISO 11403-2
2004
Plastics. Acquisition and presentation of comparable multipoint data. Thermal and processing properties
BS EN ISO 11403-3
2001
Plastics. Acquisition and presentation of comparable multipoint data. Environmental influences on properties
BS EN ISO 11409
1998
Plastics. Phenolic resins. Determination of heats and temperatures of reaction by differential scanning calorimetry
BS EN ISO 11426
1999
Determination of gold in gold jewellery alloys. Cupellation method (fire assay)
BS EN ISO 11432
2005
Building construction. Sealants. Determination of resistance to compression
BS EN ISO 11439
2000
Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
BS EN ISO 11442-1
1996
Technical product documentation. Handling of computer-based technical information. Security requirements
BS EN ISO 11442-2
1996
Technical product documentation. Handling of computer-based technical information. Original documentation
BS EN ISO 11442-3
1996
Technical product documentation. Handling of computer-based technical information. Phases in the product design process
BS EN ISO 11442-4
1996
Technical product documentation. Handling of computer-based technical information. Document management and retrieval systems
BS EN ISO 11446
2004
Road vehicles. Connectors for the electrical connection of towing and towed vehicles. 13-pole connectors for vehicles with 12 V nominal supply voltage
BS EN ISO 11468
2000
Plastics. Preparation of PVC pastes for test purposes. Dissolver method
BS EN ISO 11469
2000
Plastics. Generic identification and marking of plastics products
BS EN ISO 11489
1995
Determination of platinum in platinum jewellery alloys. Gravimetric method after reduction with mercury(I) chloride
BS EN ISO 11490
1995
Determination of palladium in palladium jewellery alloys. Gravimetric method with dimethyl glyoxime
BS EN ISO 11498
2000
Dental handpieces. Dental low-voltage electric motors
BS EN ISO 11499
1999
Dental cartridges for local anaesthetics
BS EN ISO 11507
2001
Paints and varnishes. Exposure of coatings to artificial weathering. Exposure to fluorescent UV and water
BS EN ISO 11539
1999
Ophthalmic optics. Contact lenses. Classification and contact lens materials
BS EN ISO 11541
2002
Natural gas. Determination of water content at high pressure
BS EN ISO 11542-2
1999
Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 11543
2002
Modified starch. Determination of hydroxypropyl content. Method using proton nuclear magnetic resonance (NMR) spectrometry
BS EN ISO 11545
2001
Agricultural irrigation equipment. Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles. Determination of uniformity of water distribution
BS EN ISO 11546-1
1996
Acoustics. Determination of sound insulation performances of enclosures. Measurements under laboratory conditions (for declaration purposes)
BS EN ISO 11546-2
1996
Acoustics. Determination of sound insulation performances of enclosures. Measurements in situ (for acceptance and verification purposes)
BS EN ISO 11547
1996
Small craft. Start-in-gear protection
BS EN ISO 11551
2003
Optics and optical instruments. Lasers and laser-related equipment. Test method for absorptance of optical laser components
BS EN ISO 11554
2003
Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
BS EN ISO 11562
1998
Geometric product specifications (GPS). Surface texture: Profile method. Metrological characteristics of phase correct filters
BS EN ISO 11591
2001
Small craft, engine driven. Field of vision from helm position
BS EN ISO 11592
2001
Small craft less than 8 m length of hull. Determination of maximum propulsion power rating
BS EN ISO 11593
1998
Manipulating industrial robots. Automatic end effector systems. Vocabulary and presentation of characteristics
BS EN ISO 11600
2003
Building construction. Jointing products. Classification and requirements for sealants
BS EN ISO 11606
2001
Ships and marine technology. Marine electromagnetic compasses
BS EN ISO 11608-1
2001
Pen-injectors for medical use. Pen-injectors. Requirements and test methods
BS EN ISO 11608-2
2001
Pen-injectors for medical use. Needles. Requirements and test methods
BS EN ISO 11608-3
2001
Pen-injectors for medical use. Finished cartridges. Requirements and test methods
BS EN ISO 11609
1998
Dentistry. Toothpastes. Requirements, test methods and marking
BS EN ISO 11623
2002
Transportable gas cylinders. Periodic inspection and testing of composite gas cylinders
BS EN ISO 11640
1998
Leather. Tests for colour fastness. Colour fastness to cycles of to-and-fro rubbing
BS EN ISO 11641
2003
Leather. Tests for colour fastness. Colour fastness to perspiration
BS EN ISO 11642
1998
Leather. Tests for colour fastness. Colour fastness to water
BS EN ISO 11643
1998
Leather. Tests for colour fastness. Colour fastness of small samples to dry-cleaning solutions
BS EN ISO 11644
2003
Leather. Test for adhesion of finish
BS EN ISO 11646
1998
Leather. Measurement of area
BS EN ISO 11654
1997
Acoustics. Sound absorbers for use in buildings. Rating of sound absorption
BS EN ISO 11667
2000
Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods
BS EN ISO 11668
2001
Binders for paints and varnishes. Chlorinated polymerization resins. General methods of test
BS EN ISO 11670
2003
Lasers and laser-related equipment. Test methods for laser beam parameters. Beam positional stability
BS EN ISO 11674
2001
Ships and marine technology. Heading control systems
BS EN ISO 11681-2
1998
Machinery for forestry. Portable chainsaws. Safety requirements and testing. Chainsaws for tree service
BS EN ISO 11683
1997
Packaging. Tactile warnings of danger. Requirements
BS EN ISO 11688-1
1998
Acoustics. Recommended practice for the design of low-noise machinery and equipment. Planning
BS EN ISO 11689
1997
Acoustics. Procedure for the comparison of noise-emission data for machinery and equipment
BS EN ISO 11690-1
1997
Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Noise control strategies
BS EN ISO 11690-2
1997
Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Noise control measures
BS EN ISO 11691
1997
Acoustics. Measurement of insertion loss of ducted silencers without flow. Laboratory survey method
BS EN ISO 11715-1
1998
Ophthalmic optics. Format of digital data files for data transfer for profiling of spectacle lenses. Two-dimensional tracers
BS EN ISO 11721-1
2001
Textiles. Determination of resistance of cellulose-containing textiles to micro-organisms. Soil burial test. Assessment of rot-retardant finishing
BS EN ISO 11721-2
2003
Textiles. Determination of resistance of cellulose-containing textiles to micro-organisms. Soil burial test. Identification of long-term resistance of a rot retardant finish
BS EN ISO 11732
2005
Water quality. Determination of ammonium nitrogen by flow analysis (CFA and FIA) and spectrometric detection
BS EN ISO 11733
2004
Water quality. Evaluation of the elimination and biodegradability of organic compounds in an aqueous medium. Activated sludge simulation test
BS EN ISO 11734
1999
Water quality. Evaluation of the 'ultimate' anaerobic biodegradability of organic compounds in digested sludge. Method by measurement of the biogas production
BS EN ISO 11737-2
2000
Sterilization of medical devices. Microbiological methods. Tests of sterility performed in the validation of a sterilization process
BS EN ISO 11758
1997
Rubber and plastics hoses. Exposure to a xenon arc lamp. Determination of changes in colour and appearance
BS EN ISO 11806
1997
Agricultural and forestry machinery. Portable hand-held combustion engine driven brush cutters and grass trimmers. Safety
BS EN ISO 11812
2002
Small craft. Watertight cockpits and quick-draining cockpits
BS EN ISO 11816-1
2000
Milk and milk products. Determination of alkaline phosphatase activity using a fluorimetric method. Milk and milk based drinks
BS EN ISO 11819-1
2002
Acoustics. Measurement of the influence of road surfaces on traffic noise. Statistical pass-by method
BS EN ISO 11820
1997
Acoustics. Measurements on silencers in situ
BS EN ISO 11821
1997
Acoustics. Measurement of the in situ sound attenuation of a removable screen
BS EN ISO 11857
2002
Textile floor coverings. Determination of resistance to delamination
BS EN ISO 11885
1998
Water quality. Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy
BS EN ISO 11890-1
2001
Paints and varnishes. Determination of volatile organic compound (VOC) content. Difference method
BS EN ISO 11890-2
2001
Paints and varnishes. Determination of volatile organic compound (VOC) content. Gas chromatographic method
BS EN ISO 11897
2001
Packaging. Sacks made from thermoplastic flexible film. Tear propagation on edge folds
BS EN ISO 11905-1
1998
Water quality. Determination of nitrogen. Method using oxidative digestion with peroxodisulfate
BS EN ISO 11908
1998
Binders for paints and varnishes. Amino resins. General methods of test
BS EN ISO 11909
1998
Binders for paints and varnishes. Polyisocyanate resins. General methods of test
BS EN ISO 11925-2
2002
Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame. Single-flame source test
BS EN ISO 11957
1997
Acoustics. Determination of sound insulation performance of cabins. Laboratory and in situ measurements
BS EN ISO 11960
2004
Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
BS EN ISO 11961
1997
Petroleum and natural gas industries. Steel pipes for use as drill pipe. Specification
BS EN ISO 11963
1996
Plastics. Polycarbonate sheets. Types, dimensions and characteristics
BS EN ISO 11969
1996
Water quality. Determination of arsenic. Atomic absorption spectrometric method (hydride technique)
BS EN ISO 11978
2000
Ophthalmic optics. Contact lenses and contact lens care products. Information supplied by the manufacturer
BS EN ISO 11979-1
2000
Ophthalmic implants. Intraocular lenses. Vocabulary
BS EN ISO 11979-2
2000
Ophthalmic implants. Intraocular lenses. Optical properties and test methods
BS EN ISO 11979-4
2000
Ophthalmic implants. Intraocular lenses. Labelling and information
BS EN ISO 11980
1998
Ophthalmic optics. Contact lenses and contact lens care products. Guidance for clinical investigations
BS EN ISO 11981
1999
Ophthalmic optics. Contact lenses and contact lens care products. Determination of physical compatibility of contact lens care products with contact lenses
BS EN ISO 11984
2000
Ophthalmic optics. Contact lenses. Determination of rigid lens flexure and breakage
BS EN ISO 11985
1998
Ophthalmic optics. Contact lenses. Ageing by exposure to UV and visible radiation (in vitro method)
BS EN ISO 11986
2001
Ophthalmic optics. Contact lenses and contact lens care products. Guidelines for the determination of preservative uptake and release
BS EN ISO 11987
1998
Ophthalmic optics. Contact lenses. Determination of shelf-life
BS EN ISO 11990
2003
Optics and optical instruments. Lasers and laser-related equipment. Determination of laser resistance of tracheal tube shafts
BS EN ISO 11998
2001
Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings
BS EN ISO 12001
1997
Acoustics. Noise emitted by machinery and equipment. Rules for the drafting and presentation of a noise test code
BS EN ISO 12017
1996
Plastics. Poly(methyl methacrylate) double- and triple-skin sheets. Test methods
BS EN ISO 12020
2000
Water quality. Determination of aluminium. Atomic absorption spectrometric methods
BS EN ISO 12048
2001
Packaging. Complete, filled transport packages. Compression and stacking tests using a compression tester
BS EN ISO 12058-1
2002
Plastics. Determination of viscosity using a falling-ball viscometer. Inclined-tube method
BS EN ISO 12085
1998
Geometric Product Specification (GPS). Surface texture. Profile method. Motif parameters
BS EN ISO 12086-1
2001
Plastics. Fluoropolymer dispersions and moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 12100-1
2003
Safety of machinery. Basic concepts, general principles for design. Basic terminology, methodology
BS EN ISO 12100-2
2003
Safety of machinery. Basic concepts, general principles for design. Technical principles
BS EN ISO 12114
1997
Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of cure characteristics
BS EN ISO 12115
1997
Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of flowability, maturation and shelf life
BS EN ISO 12138
1997
Textiles. Domestic laundering procedures for textile fabrics prior to flammability testing
BS EN ISO 12156-1
2000
Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method
BS EN ISO 12162
1996
Thermoplastics materials for pipes and fittings for pressure applications. Classification and design. Overall service (design) coefficient
BS EN ISO 12163
2000
Dental baseplate/modelling wax
BS EN ISO 12179
2001
Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments
BS EN ISO 12185
1996
Methods of test for petroleum and its products. Crude petroleum and petroleum products. Determination of density. Oscillating U-tube method
BS EN ISO 12193
2004
Animal and vegetable fats and oils. Determination of lead by direct graphite furnace atomic absorption spectroscopy
BS EN ISO 12209-1
2001
Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air. Yoke type connections
BS EN ISO 12209-2
2001
Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air. Threaded connections
BS EN ISO 12209-3
2001
Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air. Adaptor for 230 bar valves
BS EN ISO 12215-1
2000
Small craft. Hull construction and scantlings. Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate
BS EN ISO 12215-2
2002
Small craft. Hull construction and scantlings. Materials. Core materials for sandwich construction, embedded materials
BS EN ISO 12215-3
2002
Small craft. Hull construction and scantlings. Materials. Steel, aluminium alloys, wood, other materials
BS EN ISO 12216
2002
Small craft. Windows, portlights, hatches, deadlights and doors. Strength and watertightness requirements
BS EN ISO 12217-2
2002
Small craft. Stability and buoyancy assessment and categorization. Sailing boats of hull length greater than or equal to 6 m
BS EN ISO 12217-3
2002
Small craft. Stability and buoyancy assessment and categorization. Boats of hull length less than 6 m
BS EN ISO 12224-1
1998
Solder wire, solid and flux cored. Specification and test methods. Classification and performance requirements
BS EN ISO 12224-2
1999
Solder wire, solid and flux cored. Specification and test methods. Determination of flux content
BS EN ISO 12228
1999
Animal and vegetable fats and oils. Determination of individual and total sterols contents. Gas chromatographic method
BS EN ISO 12236
1996
Geotextiles and geotextile-related products. Static puncture test (CBR-Test)
BS EN ISO 12241
1998
Thermal insulation for building equipment and industrial installations. Calculation rules
BS EN ISO 12543-1
1998
Glass in building. Laminated glass and laminated safety glass. Definitions and description of component parts
BS EN ISO 12543-3
1998
Glass in building. Laminated glass and laminated safety glass. Laminated glass
BS EN ISO 12543-4
1998
Glass in building. Laminated glass and laminated safety glass. Test methods for durability
BS EN ISO 12543-5
1998
Glass in building. Laminated glass and laminated safety glass. Dimensions and edge finishing
BS EN ISO 12543-6
1998
Glass in building. Laminated glass and laminated safety glass. Appearance
BS EN ISO 12567-1
2000
Thermal performance of windows and doors. Determination of thermal transmittance by hot box method. Complete windows and doors
BS EN ISO 12569
2001
Thermal insulation in buildings. Determination of air change in buildings. Tracer gas dilution method
BS EN ISO 12570
2000
Hygrothermal performance of building materials and products. Determination of moisture content by drying at elevated temperature
BS EN ISO 12571
2000
Hygrothermal performance of building materials and products. Determination of hygroscopic properties
BS EN ISO 12572
2001
Hygrothermal performance of building materials and products. Determination of water vapour transmission properties
BS EN ISO 12676
2003
Refractory products. Determination of resistance to carbon monoxide
BS EN ISO 12687
1998
Metallic coatings. Porosity tests. Humid sulfur (flowers of sulfur) test
BS EN ISO 12706
2001
Non-destructive testing. Terminology. Terms used in penetrant testing
BS EN ISO 12737
2005
Metallic materials. Determination of plane-strain fracture toughness
BS EN ISO 12777-1
1997
Methods of test for pallet joints. Determination of bending resistance of pallet nails, other dowel-type fasteners and staples
BS EN ISO 12777-2
2000
Methods of test for pallet joints. Determination of withdrawal and head pull-through resistance of pallet nails and staples
BS EN ISO 12864
1998
Ophthalmic optics. Contact lenses. Determination of scattered light
BS EN ISO 12865
1998
Ophthalmic instruments. Retinoscopes
BS EN ISO 12866
1999
Ophthalmic instruments. Perimeters
BS EN ISO 12867
1998
Ophthalmic instruments. Trial frames
BS EN ISO 12870
2004
Ophthalmic optics. Spectacle frames. General requirements and test methods
BS EN ISO 12894
2001
Ergonomics of the thermal environment. Medical supervision of individuals exposed to extreme hot or cold environments
BS EN ISO 12922
2002
Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
BS EN ISO 12937
2001
Methods of test for petroleum and its products. BS 2000-438:Petroleum products. Determination of content. Coulometric Karl Fischer titration method
BS EN ISO 12944-1
1998
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. General introduction
BS EN ISO 12944-2
1998
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Classification of environments
BS EN ISO 12944-3
1998
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Design considerations
BS EN ISO 12944-4
1998
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Types of surface and surface preparation
BS EN ISO 12944-5
1998
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Protective paint systems
BS EN ISO 12944-6
1998
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Laboratory performance test methods
BS EN ISO 12944-7
1998
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Execution and supervision of paintwork
BS EN ISO 12944-8
1998
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Development of specifications for new work and maintenance
BS EN ISO 12945-1
2001
Textiles. Determination of fabric propensity to surface fuzzing and to pilling. Pilling box method
BS EN ISO 12945-2
2000
Textiles. Determination of fabric propensity to surface fuzzing and to pilling. Modified Martindale method
BS EN ISO 12947-3
1999
Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Determination of mass loss
BS EN ISO 12947-4
1999
Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Assessment of appearance change
BS EN ISO 12947-1
1999
Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Martindale abrasion testing apparatus
BS EN ISO 12947-2
1999
Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Determination of specimen breakdown
BS EN ISO 12952-1
1999
Textiles. Burning behaviour of bedding items. General test methods for the ignitability by a smouldering cigarette
BS EN ISO 12952-2
1999
Textiles. Burning behaviour of bedding items. Specific test methods for the ignitability by a smouldering cigarette
BS EN ISO 12952-3
1999
Textiles. Burning behaviour of bedding items. General test methods for the ignitability by a small open flame
BS EN ISO 12952-4
1999
Textiles. Burning behaviour of bedding items. Specific test methods for the ignitability by a small open flame
BS EN ISO 12956
1999
Geotextiles and geotextile-related products. Determination of the characteristic opening size
BS EN ISO 12958
1999
Geotextiles and geotextile-related products. Determination of water flow capacity in their plane
BS EN ISO 13000-1
2005
Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Requirements and designation
BS EN ISO 13000-2
2005
Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Preparation of test specimens and determination of properties
BS EN ISO 13002
1999
Carbon fibre. Designation system for filament yarns
BS EN ISO 13090-1
1998
Mechanical vibration and shock. Guidance on safety aspects of tests and experiments with people. Exposure to whole-body mechanical vibration and repeated shock
BS EN ISO 13212
1999
Ophthalmic optics. Contact lens care products. Guidelines for the determination of shelf-life
BS EN ISO 13230
1999
Ophthalmic optics. Bar code specifications
BS EN ISO 13294
1997
Dental handpieces. Dental air-motors
BS EN ISO 13295
1997
Dental rotary instruments. Mandrels
BS EN ISO 13297
2001
Small craft. Electrical systems. Alternating current installations
BS EN ISO 13337
1998
Spring-type straight pins. Slotted, light duty
BS EN ISO 13340
2001
Transportable gas cylinders. Cylinder valves for non-refillable cylinders. Specification and prototype testing
BS EN ISO 13341
1998
Transportable gas cylinders. Fitting of valves to gas cylinders
BS EN ISO 13366-1
1997
Milk. Enumeration of somatic cells. Microscopic method
BS EN ISO 13366-2
1997
Milk. Enumeration of somatic cells. Method using an electronic particle counter
BS EN ISO 13366-3
1997
Milk. Enumeration of somatic cells. Fluoro-opto-electronic method
BS EN ISO 13370
1998
Thermal performance of buildings. Heat transfer via the ground. Calculation methods
BS EN ISO 13395
1996
Water quality. Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection
BS EN ISO 13397-1
1996
Periodontal curettes, dental scalers and excavators. General requirements
BS EN ISO 13397-2
1997
Periodontal curettes, dental scalers and excavators. Periodontal curettes. Gr-type
BS EN ISO 13397-3
1997
Periodontal curettes, dental scalers and excavators. Dental scalers. H-type
BS EN ISO 13397-4
1998
Periodontal curettes, dental scalers and excavators. Dental excavators. Discoid type
BS EN ISO 13406-1
1999
Ergonomic requirements for work with visual display based on flat panels. Introduction
BS EN ISO 13406-2
2002
Ergonomic requirements for work with visual display based on flat panels. Ergonomic requirements for flat panel displays
BS EN ISO 13407
1999
Human-centred design processes for interactive systems
BS EN ISO 13426-1
2003
Geotextiles and geotextile-related products. Strength of internal structural junctions. Geocells
BS EN ISO 13427
1998
Geotextiles and geotextile-related products. Abrasion damage simulation (sliding block test).
BS EN ISO 13431
1999
Geotextiles and geotextiles-related products. Determination of tensile creep and creep rupture behaviour
BS EN ISO 13437
1998
Geotextiles and geotextile-related products. Method for installing and extracting samples in soil, and testing specimens in laboratory
BS EN ISO 13468-1
1997
Plastics. Determination of the total luminous transmittance of transparent materials. Single-beam instrument
BS EN ISO 13478
1997
Thermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack propagation (RCP). Full-scale test
BS EN ISO 13479
1997
Polyolefin pipes for the conveyance of fluids. Determination of resistance to crack propagation. Test method for slow crack gStandardth on notched pipes (notch test)
BS EN ISO 13485
2003
Medical devices. Quality management systems. Requirements for regulatory purposes
BS EN ISO 13488
2001
Quality systems. Medical devices. Particular requirements for the application of EN ISO 9002
BS EN ISO 13500
1999
Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests
BS EN ISO 13533
2002
Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment
BS EN ISO 13534
2001
Petroleum and natural gas industries. Drilling and production equipment. Inspection, maintenance, repair and re-manufacture of hoisting equipment
BS EN ISO 13535
2001
Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment
BS EN ISO 13565-1
1998
Geometric Product Specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Filtering and general measurement conditions
BS EN ISO 13565-3
2000
Geometric Product Specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Height characterization using the material probability curve
BS EN ISO 13567-1
2002
Technical product documentation. Organization and naming of layers for CAD. Overview and principles
BS EN ISO 13567-2
2002
Technical product documentation. Organization and naming of layers for CAD. Concepts, format and codes used in construction documentation
BS EN ISO 13625
2002
Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings
BS EN ISO 13628-1
2005
Petroleum and natural gas industries. Design and operation of subsea production systems. General requirements and recommendations
BS EN ISO 13628-2
2001
Petroleum and natural gas industries. Design and operation of subsea production systems. Flexible pipe systems for subsea and marine applications
BS EN ISO 13628-3
2001
Petroleum and natural gas industries. Design and operation of subsea production systems. Through flowline (TFL) systems
BS EN ISO 13628-4
1999
Petroleum and natural gas industries. Design and operation of subsea production systems. Subsea wellhead and tree equipment
BS EN ISO 13631
2002
Petroleum and natural gas industries. Packaged reciprocating gas compressors
BS EN ISO 13666
1999
Ophthalmic optics. Spectacle lenses. Vocabulary
BS EN ISO 13680
2002
Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock. Technical delivery conditions
BS EN ISO 13691
2002
Petroleum and natural gas industries. High-speed special-purpose gear units
BS EN ISO 13694
2001
Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution
BS EN ISO 13696
2002
Optics and optical instruments. Test methods for radiation scattered by optical components
BS EN ISO 13702
1999
Petroleum and natural gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines
BS EN ISO 13703
2001
Petroleum and natural gas industries. Design and installation of piping systems on offshore production platforms
BS EN ISO 13705
2002
Petroleum and natural gas industries. Fired heaters for general refinery service
BS EN ISO 13706
2005
Petroleum and natural gas industries. Air cooled heat exchangers
BS EN ISO 13716
2000
Dentistry. Reversible-irreversible hydrocolloid impression material systems
BS EN ISO 13731
2002
Ergonomics of the thermal environment. Vocabulary and symbols
BS EN ISO 13734
2001
Natural gas. Organic sulfur compounds used as odorants. Requirements and test methods
BS EN ISO 13753
1999
Mechanical vibration and shock. Hand-arm vibration. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
BS EN ISO 13757
1996
Methods of test for petroleum and its products. Liquefied petroleum gases. Determination of oily residues. High temperature method
BS EN ISO 13760
2000
Plastics pipes for the conveyance of fluids under pressure. Miner's rule. Calculation method for cumulative damage
BS EN ISO 13783
1998
Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints. Test method for leaktightness and strength while subjected to bending and internal pressure
BS EN ISO 13787
2003
Thermal insulation products for building equipment and industrial installations. Determination of declared thermal conductivity
BS EN ISO 13789
1999
Thermal performance of buildings. Transmission heat loss coefficient. Calculation method
BS EN ISO 13793
2001
Thermal performance of buildings. Thermal design of foundations to avoid frost heave
BS EN ISO 13845
2000
Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes. Test method for leaktightness under internal pressure and with angular deflection
BS EN ISO 13849-2
2003
Safety of machinery. Safety-related parts of control systems. Validation
BS EN ISO 13900
2002
Steel. Determination of boron content. Curcumin spectrophotometric method after distillation
BS EN ISO 13918
1998
Welding. Studs and ceramic ferrules for arc stud welding
BS EN ISO 13919-1
1997
Welding. Electron and laser beam welded joints. Guidance on quality levels for imperfections. Steel
BS EN ISO 13919-2
2001
Welding. Electron and laser beam welded joints. Guidance on quality levels for imperfections. Aluminium and its weldable alloys
BS EN ISO 13920
1997
Welding. General tolerances for welded constructions. Dimensions for lengths and angles. Shape and position
BS EN ISO 13927
2003
Plastics. Simple heat release test using a conical radiant heater and a thermopile detector
BS EN ISO 13929
2001
Small craft. Steering gear. Geared link systems
BS EN ISO 13934-1
1999
Textiles. Tensile properties of fabrics. Determination of maximum force and elongation at maximum force using the strip method
BS EN ISO 13934-2
1999
Textiles. Tensile properties of fabrics. Determination of maximum force using the grab method
BS EN ISO 13935-1
1999
Textiles. Seam tensile properties of fabrics and made-up textile articles. Determination of maximum force to seam rupture using the strip method
BS EN ISO 13935-2
1999
Textiles. Seam tensile properties of fabrics and made-up textile articles. Determination of maximum force to seam rupture using the grab method
BS EN ISO 13937-1
2000
Textiles. Tear properties of fabrics. Determination of tear force using ballistic pendulum method (Elmendorf)
BS EN ISO 13937-2
2000
Textiles. Tear properties of fabrics. Determination of tear force of trouser-shaped test specimens (single tear method)
BS EN ISO 13937-3
2000
Textiles. Tear properties of fabrics. Determination of tear force of wing-shaped test specimens (single tear method)
BS EN ISO 13937-4
2000
Textiles. Tear properties of fabrics. Determination of tear force of tongue-shaped test specimens (double tear test)
BS EN ISO 13938-1
1999
Textiles. Bursting properties of fabrics. Hydraulic method for determination of bursting strength and bursting distension
BS EN ISO 13938-2
1999
Textiles. Bursting properties of fabrics. Pneumatic method for determination of bursting strength and bursting distension
BS EN ISO 13943
2000
Fire safety. Vocabulary
BS EN ISO 13997
1999
Protective clothing. Mechanical properties. Determination of resistance to cutting by sharp objects
BS EN ISO 13998
2003
Protective clothing. Aprons, trousers and vests protecting against cuts and stabs by hand knives
BS EN ISO 14001
2004
Environmental management systems. Specification with guidance for use
BS EN ISO 14010
1996
Guidelines for environmental auditing. General principles
BS EN ISO 14011
1996
Guidelines for environmental auditing. Audit procedures. Auditing of environmental management systems
BS EN ISO 14012
1996
Guidelines for environmental auditing. Qualification criteria for environmental auditors
BS EN ISO 14020
2001
Environmental labels and declarations. General principles
BS EN ISO 14021
2001
Environmental labels and declarations. Self-declared environmental claims (Type II environmental labelling)
BS EN ISO 14024
2001
Environmental labels and declarations. Type I environmental labelling. Principles and procedures
BS EN ISO 14031
2000
Environmental management. Environmental performance evaluation. Guidelines
BS EN ISO 14040
1997
Environmental management. Life cycle assessment. Principles and framework
BS EN ISO 14041
1998
Environmental management. Life cycle assessment. Goal and scope definition and inventory analysis
BS EN ISO 14042
2000
Environmental management. Life cycle management. Life cycle impact assessment
BS EN ISO 14043
2000
Environmental management. Life cycle assessment. Life cycle interpretation
BS EN ISO 14111
1999
Natural gas. Guidelines to traceability in analysis
BS EN ISO 14113
1997
Gas welding equipment. Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar
BS EN ISO 14114
1999
Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. General requirements
BS EN ISO 14122-1
2001
Safety of machinery. Permanent means of access to machinery. Choice of a fixed means of access between two levels
BS EN ISO 14122-2
2001
Safety of machinery. Permanent means of access to machinery. Working platforms and walkways
BS EN ISO 14122-3
2001
Safety of machinery. Permanent means of access to machinery. Stairways, stepladders and guard-rails
BS EN ISO 14125
1998
Fibre-reinforced plastic composites. Determination of flexural properties
BS EN ISO 14129
1998
Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the ± 45° tension test method
BS EN ISO 14130
1998
Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method
BS EN ISO 14155-2
2003
Clinical investigation of medical devices for human subjects. Clinical investigation plans
BS EN ISO 14159
2004
Safety of machinery. Hygiene requirements for the design of machinery
BS EN ISO 14160
1998
Sterilization of single-use medical devices incorporating materials of animal origin. Validation and routine control of sterilization by liquid chemical sterilants
BS EN ISO 14161
2001
Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results
BS EN ISO 14163
1998
Acoustics. Guidelines for noise control by silencers
BS EN ISO 14172
2003
Welding consumables. Covered electrodes for manual metal arc welding of nickel and nickel alloys. Classification
BS EN ISO 14182
2000
Animal feeding stuff. Determination of residues of organophosphorus pesticides. Gas chromatographic method
BS EN ISO 14184-1
1999
Textiles. Determination of formaldehyde. Free and hydrolyzed formaldehyde (water extraction method)
BS EN ISO 14184-2
1998
Textiles. Determination of formaldehyde. Released formaldehyde (vapour absorption method)
BS EN ISO 14233
2003
Dentistry. Polymer-based die materials
BS EN ISO 14246
2001
Transportable gas cylinders. Gas cylinder valves. Manufacturing tests and inspections
BS EN ISO 14253-1
1999
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Decision rules for proving conformance or non-conformance with specifications
BS EN ISO 14257
2001
Acoustics. Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance
BS EN ISO 14268
2002
Leather. Physical and mechanical tests. Determination of water vapour permeability
BS EN ISO 14270
2001
Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
BS EN ISO 14271
2001
Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)
BS EN ISO 14272
2001
Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
BS EN ISO 14273
2001
Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
BS EN ISO 14324
2003
Resistance spot welding. Destructive tests of welds. Method for the fatigue testing of spot welded joints
BS EN ISO 14356
2003
Dentistry. Duplicating material
BS EN ISO 14372
2001
Welding consumables. Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
BS EN ISO 14402
1999
Water quality. Determination of phenol index by flow analysis (FIA and CFA)
BS EN ISO 14403
2002
Water quality. Determination of total cyanide and free cyanide by continuous flow analysis
BS EN ISO 14419
1999
Textiles. Oil repellency. Hydrocarbon resistance test
BS EN ISO 14438
2002
Glass in building. Determination of energy balance value. Calculation method
BS EN ISO 14453
2000
Pulps. Determination of acetone-soluble matter
BS EN ISO 14460
1999
Protective clothing for automobile racing drivers. Protection against heat and flame. Performance requirements and test methods
BS EN ISO 14501
1999
Milk and milk powder. Determination of aflatoxin M1 content. Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatography
BS EN ISO 14509
2001
Small craft. Measurement of airborne sound emitted by powered recreational craft
BS EN ISO 14526-1
2000
Plastics. Phenolic powder moulding compounds (PF-PMCs). Designation system and basis for specifications
BS EN ISO 14526-2
2000
Plastics. Phenolic powder moulding compounds (PF-PMCs). Preparation of test specimens and determination of properties
BS EN ISO 14526-3
2000
Plastics. Phenolic powder moulding compounds (PF-PMCs). Requirements for selected moulding compounds
BS EN ISO 14527-1
2000
Plastics. Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs). Designation system and basis for specifications
BS EN ISO 14527-2
2000
Preparation of test specimens and determination of properties
BS EN ISO 14527-3
2000
Plastics. Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs). Requirements for selected moulding compounds
BS EN ISO 14528-1
2000
Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs). Designation system and basis for specifications
BS EN ISO 14528-2
2000
Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs). Preparation of test specimens and determination of properties
BS EN ISO 14528-3
2000
Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs). Requirements for selected moulding compounds
BS EN ISO 14529-1
2000
Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs). Designation system and basis for specifications
BS EN ISO 14529-2
2000
Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs). Preparation of test specimens and determination of properties
BS EN ISO 14529-3
2000
Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs). Requirements for selected moulding compounds
BS EN ISO 14530-1
2000
Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs). Designation system and basis for specifications
BS EN ISO 14530-2
2000
Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs). Preparation of test specimens and determination of properties
BS EN ISO 14530-3
2000
Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs). Requirements for selected moulding compounds
BS EN ISO 14534
2002
Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements
BS EN ISO 14539
2001
Manipulating industrial robots. Object handling with grasp-type grippers. Vocabulary and presentation of characteristics
BS EN ISO 14554-1
2001
Quality requirements for welding. Resistance welding of metallic materials. Comprehensive quality requirements
BS EN ISO 14554-2
2001
Quality requirements for welding. Resistance welding of metallic materials. Elementary quality requirements
BS EN ISO 14555
1998
Welding. Arc stud welding of metallic materials
BS EN ISO 14556
2000
Steel. Charpy V-notch pendulum impact test. Instrumented test method
BS EN ISO 14557
2002
Fire-fighting hoses. Rubber and plastics suction hoses and hose assemblies
BS EN ISO 14565
2001
Animal feeding stuffs. Determination of vitamin A content. Method using high-performance liquid chromatography
BS EN ISO 14577-1
2002
Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN ISO 14577-2
2002
Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
BS EN ISO 14577-3
2002
Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14579
2001
Hexalobular socket head cap screws
BS EN ISO 14580
2001
Hexalobular socket cheese head screws
BS EN ISO 14583
2001
Hexalobular socket pan head screws
BS EN ISO 14584
2001
Hexalobular socket raised countersunk head screws
BS EN ISO 14587
2001
Hexalobular socket raised countersunk (oval) head tapping screws
BS EN ISO 14588
2001
Blind rivets. Terminology and definitions
BS EN ISO 14589
2001
Blind rivets. Mechanical testing
BS EN ISO 14597
1999
Petroleum products. Determination of vanadium and nickel content. Wavelength-dispersive X-ray fluorescence spectrometry
BS EN ISO 14602
1998
Non-active surgical implants. Implants for osteosynthesis. Particular requirements
BS EN ISO 14620-1
2002
Space systems. Safety requirements. System safety
BS EN ISO 14630
2005
General requirements for non-active surgical implants
BS EN ISO 14631
1999
Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods
BS EN ISO 14632
1999
Extruded sheets of polyethylene (PE-HD). Requirements and test methods
BS EN ISO 14644-1
1999
Cleanrooms and associated controlled environments. Classification of air cleanliness
BS EN ISO 14644-2
2000
Cleanrooms and associated controlled environments. Specifications for testing and monitoring to prove continued compliance with ISO 14644-1
BS EN ISO 14644-4
2001
Cleanrooms and associated controlled environments. Design, construction and start-up
BS EN ISO 14660-1
2000
Geometrical Product Specifications (GPS). Geometrical features. General terms and definitions
BS EN ISO 14660-2
2000
Geometrical Product Specifications (GPS). Geometrical features. Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
BS EN ISO 14673-1
2004
Milk and milk products. Determination of nitrate and nitrite contents. Method using cadmium reduction and spectrometry
BS EN ISO 14673-2
2004
Milk and milk products. Determination of nitrate and nitrite contents. Method using segmented flow analysis (Routine method)
BS EN ISO 14673-3
2004
Milk and milk products. Determination of nitrate and nitrite contents. Method using cadmium reduction and flow injection analysis with in-line dialysis (routine method)
BS EN ISO 14683
1999
Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values
BS EN ISO 14689-1
2003
Geotechnical investigation and testing. Identification and classification of rock. Identification and description
BS EN ISO 14691
2000
Petroleum and natural gas industries. Flexible couplings for mechanical power transmission. General purpose applications
BS EN ISO 14692-1
2002
Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Vocabulary, symbols, applications and materials
BS EN ISO 14692-2
2002
Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Qualification and manufacture
BS EN ISO 14692-3
2002
Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. System design
BS EN ISO 14692-4
2002
Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Fabrication, installation and operation
BS EN ISO 14693
2003
Petroleum and natural gas industries. Drilling and well-servicing equipment
BS EN ISO 14698-1
2003
Cleanrooms and associated controlled environments. Biocontamination control. General principles and methods
BS EN ISO 14698-2
2003
Cleanrooms and associated controlled environments. Biocontamination control. Evaluation and interpretation of biocontamination data
BS EN ISO 14713
1999
Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings. Guidelines
BS EN ISO 14726-1
2002
Ships and marine technology. Identification colours for the content of piping systems. Main colours and media
BS EN ISO 14727
1999
Dental implants. Prefabricated parts connecting suprastructures to dental implants. Contents of technical file
BS EN ISO 14729
2001
Ophthalmic optics. Contact lens care products. Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses
BS EN ISO 14730
2000
Ophthalmic optics. Contact lens care products. Antimicrobial preservative efficacy testing and guidance on determining discard date
BS EN ISO 14738
2002
Safety of machinery. Anthropometric requirements for the design of workstations at machinery
BS EN ISO 14744-1
2001
Welding. Acceptance inspection of electron beam welding machines. Principles and acceptance conditions
BS EN ISO 14744-2
2001
Welding. Acceptance inspection of electron beam welding machines. Measurement of accelerating voltage characteristics
BS EN ISO 14744-3
2001
Welding. Acceptance inspection of electron beam welding machines. Measurement of beam current characteristics
BS EN ISO 14744-4
2001
Welding. Acceptance inspection of electron beam welding machines. Measurement of welding speed
BS EN ISO 14744-5
2001
Welding. Acceptance inspection of electron beam welding machines. Measurement of run-out accuracy
BS EN ISO 14744-6
2001
Welding. Acceptance inspection of electron beam welding machines. Measurement of stability of spot position
BS EN ISO 14801
2003
Dentistry. Fatigue test for endosseous dental implants
BS EN ISO 14819-1
2003
Traffic and Traveller Information (TTI). TTI Messages via traffic message coding. Coding protocol for Radio Data System. Traffic Message Channel (RDS-TMC) using ALERT-C
BS EN ISO 14819-2
2003
Traffic and Traveller Information (TTI). TTI Messages via traffic message coding. Event and information codes for Radio Data System. Traffic Message Channel (RDS-TMC)
BS EN ISO 14847
1999
Rotary positive displacement pumps. Technical requirements
BS EN ISO 14877
2002
Protective clothing for abrasive blasting operations using granular abrasives
BS EN ISO 14890
2003
Conveyor belts. Specification for rubber or plastics covered conveyor belts of textile construction for general use
BS EN ISO 14891
2002
Milk and milk products. Determination of nitrogen content. Routine method using combustion according to the Dumas principle
BS EN ISO 14895
2003
Small craft. Liquid-fuelled galley stoves
BS EN ISO 14896
2001
Plastics. Polyurethane raw materials. Determination of isocyanate content
BS EN ISO 14902
2001
Animal feeding stuffs. Determination of trypsin inhibitor activity of soya products
BS EN ISO 14911
1999
Water quality. Determination of dissolved Li+, Na4+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography. Method for water and waste water
BS EN ISO 14915-2
2003
Software ergonomics for multimedia user interfaces. Multimedia navigation and control
BS EN ISO 14918
1998
Thermal spraying. Approval testing of thermal sprayers
BS EN ISO 14919
2001
Thermal spraying, Wires, rods and cords for flame and arc spraying. Classification. Technical supply conditions
BS EN ISO 14920
1999
Thermal spraying. Spraying and fusing of self-fluxing alloys
BS EN ISO 14921
2001
Thermal spraying. Procedure for the application of thermally sprayed coatings for engineering components
BS EN ISO 14922-1
1999
Thermal spraying. Quality requirements of thermally sprayed structures. Guidance for selection and use
BS EN ISO 14922-2
1999
Thermal spraying. Quality requirements of thermally sprayed structures. Comprehensive quality requirements
BS EN ISO 14922-3
1999
Thermal spraying. Quality requirements of thermally sprayed structures. Standard quality requirements
BS EN ISO 14922-4
1999
Thermal spraying. Quality requirements of thermally sprayed structures. Elementary quality requirements
BS EN ISO 14923
2003
Thermal spraying. Characterization and testing of thermally sprayed coatings
BS EN ISO 14935
1999
Petroleum and related products. Determination of wick flame persistence of fire-resistant fluids
BS EN ISO 14937
2001
Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
BS EN ISO 14939
2001
Animal feeding stuffs. Determination of carbadox content. Method using high performance liquid chromatography
BS EN ISO 14946
2001
Small craft. Maximum load capacity
BS EN ISO 14956
2002
Air quality. Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
BS EN ISO 14971
2001
Medical devices. Application of risk management to medical devices
BS EN ISO 14982
1998
Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria
BS EN ISO 15004
1998
Ophthalmic instruments. Fundamental requirements and test methods
BS EN ISO 15005
2002
Road vehicles. Ergonomic aspects of transport information and control systems. Dialogue management principles and compliance procedures
BS EN ISO 15008
2003
Road vehicles. Ergonomic aspects of transport information and control systems. Specifications and compliance procedures for in-vehicle visual presentation
BS EN ISO 15011-1
2002
Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc welding. Determination of emission rate and sampling for analysis of particulate fume
BS EN ISO 15011-2
2003
Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc welding. Determination of emission rates of gases, except ozone
BS EN ISO 15011-3
2002
Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc welding. Determination of ozone concentration using fixed point measurements
BS EN ISO 15013
1999
Extruded sheets of polypropylene (PP). Requirements and test methods
BS EN ISO 15025
2002
Protective clothing. Protection against heat and flame. Method of test for limited flame spread
BS EN ISO 15027-1
2002
Immersion suits. Constant wear suits, requirements including safety
BS EN ISO 15027-2
2002
Immersion suits. Abandonment suits, requirements including safety
BS EN ISO 15027-3
2002
Immersion suits. Test methods
BS EN ISO 15029-1
2000
Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids. Spray flame persistence. Hollow-cone nozzle method
BS EN ISO 15061
2001
Water quality. Determination of dissolved bromate. Method by liquid chromatography of ions
BS EN ISO 15083
2003
Small craft. Bilge-pumping systems
BS EN ISO 15084
2003
Small craft. Anchoring, mooring and towing. Strong points
BS EN ISO 15085
2003
Small craft. Man-overboard prevention and recovery
BS EN ISO 15087-1
2001
Dental elevators. General requirements
BS EN ISO 15087-2
2000
Dental elevators. Warwick James elevators
BS EN ISO 15087-3
2000
Dental elevators. Cryer elevators
BS EN ISO 15087-4
2000
Dental elevators. Coupland elevators
BS EN ISO 15087-5
2000
Dental elevators. Bein elevators
BS EN ISO 15087-6
2000
Dental elevators. Flohr elevators
BS EN ISO 15098-1
2001
Dental tweezers. General requirements
BS EN ISO 15098-2
2000
Dental tweezers. Meriam types
BS EN ISO 15098-3
2000
Dental tweezers. College types
BS EN ISO 15136-1
2001
Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Pumps
BS EN ISO 15138
2001
Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning
BS EN ISO 15141-1
1998
Foodstuffs. Determination of ochratoxin A in cereals and cereal products. High performance liquid chromatographic method with silica gel clean up
BS EN ISO 15141-2
1998
Foodstuffs. Determination of ochratoxin A in cereals and cereal products. High performance liquid chromatographic method with bicarbonate clean up
BS EN ISO 15147
1999
Light conveyor belts. Tolerances on widths and lengths of cut light conveyor belts
BS EN ISO 15148
2002
Hygrothermal performance of building materials and products. Determination of water absorption coefficient by partial immersion
BS EN ISO 15156-1
2002
Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. General principles for selection of cracking-resistant materials
BS EN ISO 15156-2
2003
Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Cracking-resistant carbon and low alloy steels, and the use of cast irons
BS EN ISO 15156-3
2003
Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
BS EN ISO 15186-1
2003
Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity. Laboratory measurements
BS EN ISO 15189
2003
Medical laboratories. Particular requirements for quality and competence
BS EN ISO 15197
2003
In vitro diagnostic test systems. Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
BS EN ISO 15212-1
1999
Oscillation-type density meters. Laboratory instruments
BS EN ISO 15225
2000
Nomenclature. Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange
BS EN ISO 15245-2
2001
Gas cylinders. Parallel threads for connection of valves to gas cylinders. Gauge inspection
BS EN ISO 15252-1
2000
Plastics. Epoxy powder moulding compounds (EP-PMCs). Designation system and basis for specifications
BS EN ISO 15252-2
2000
Plastics. Epoxy powder moulding compounds (EP-PMCs). Preparation of test specimens and determination of properties
BS EN ISO 15252-3
2000
Plastics. Epoxy powder moulding compounds (EP-PMCs). Requirements for selected moulding compounds
BS EN ISO 15253
2000
Ophthalmic optics and instruments. Optical devices for low-vision aids
BS EN ISO 15254
2002
Ophthalmic optics and instruments. Electro-optical devices for enhancing low vision
BS EN ISO 15301
2001
Animal and vegetable fats and oils. Determination of sediment in crude fats and oils. Centrifuge method
BS EN ISO 15304
2002
Animal and vegetable fats and oils. Determination of the content of trans fatty acid isomers of vegetable fats and oil. Gas chromatographic method
BS EN ISO 15318
2000
Pulp, paper and board. Determination of 7 specified polychlorinated biphenyls (PCB)
BS EN ISO 15320
2003
Pulp, paper and board. Determination of pentachlorophenol in an aqueous extract
BS EN ISO 15330
1999
Fasteners. Preloading test for the detection of hydrogen embrittlement. Parallel bearing surface method
BS EN ISO 15349-2
2003
Unalloyed steel. Determination of low carbon content. Infrared absorption method after combustion in an induction furnace (with preheating)
BS EN ISO 15364
2002
Ships and marine technology. Pressure/vacuum valves for cargo tanks
BS EN ISO 15367-1
2003
Lasers and laser-related equipment. Test methods for determination of the shape of a laser beam wavefront. Terminology and fundamental aspects
BS EN ISO 15438
2003
Information technology. Automatic identification and data capture techniques. Bar code symbology specifications. PDF417
BS EN ISO 15463
2003
Petroleum and natural gas industries. Field inspection of new casing, tubing and plain-end drill pipe
BS EN ISO 15480
1999
Hexagon washer head drilling screws with tapping screw thread
BS EN ISO 15481
1999
Cross recessed pan head drilling screws with tapping screw thread
BS EN ISO 15482
1999
Cross recessed countersunk head drilling screws with tapping screw thread
BS EN ISO 15483
1999
Cross recessed raised countersunk head drilling screws with tapping screw thread
BS EN ISO 15487
2001
Textiles. Method for assessing appearance of apparel and other textile end products after domestic washing and drying
BS EN ISO 15493
2003
Plastics piping systems for industrial applications. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly (vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C). Specifications for components and the system. Metric series
BS EN ISO 15494
2003
Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE) and polypropylene (PP). Specifications for components and the system. Metric series
BS EN ISO 15512
2003
Plastics. Determination of water content
BS EN ISO 15528
2000
Paints, varnishes and raw materials for paints and varnishes. Sampling
BS EN ISO 15535
2003
General requirements for establishing anthropometric databases
BS EN ISO 15540
2001
Ships and marine technology. Fire resistance of hose assemblies. Test methods
BS EN ISO 15541
2001
Ships and marine technology. Fire resistance of hose assemblies. Requirements for the test bench
BS EN ISO 15546
2002
Petroleum and natural gas industries. Aluminium alloy drill pipe
BS EN ISO 15547
2001
Petroleum and natural gas industries. Plate heat exchangers
BS EN ISO 15584
2001
Small craft. Inboard petrol engines. Engine-mounted fuel and electrical components
BS EN ISO 15586
2003
Water quality. Determination of trace elements using atomic absorption spectrometry with graphite furnace
BS EN ISO 15587-1
2002
Water quality. Digestion for the determination of selected elements in water. Aqua regia digestion
BS EN ISO 15587-2
2002
Water quality. Digestion for the determination of selected elements in water. Nitric acid digestion
BS EN ISO 15606
2000
Dental handpieces. Air-powered scalers and scaler tips
BS EN ISO 15607
2003
Specification and qualification of welding procedures for metallic materials. General rules
BS EN ISO 15609-1
2004
Specification and qualification of welding procedures for metallic materials - Welding procedure specification Part 1: Arc welding
BS EN ISO 15609-2
2001
Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Gas welding
BS EN ISO 15610
2003
Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables
BS EN ISO 15611
2003
Specification and qualification of welding procedures for metallic materials. Qualification based on previous welding experience
BS EN ISO 15614-1
2004
Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
BS EN ISO 15614-8
2002
Specification and qualification of welding procedures for metallic materials. Welding procedure test. Welding of tubes to tube-plate joints
BS EN ISO 15614-11
2002
Specification and qualification of welding procedures for metallic materials. Welding procedure test. Electron and laser beam welding
BS EN ISO 15615
2002
Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. Safety requirements in high-pressure devices
BS EN ISO 15616-1
2003
Acceptance tests for CO2- laser beam machines for high quality welding and cutting. General principles, acceptance conditions
BS EN ISO 15616-3
2003
Acceptance tests for CO2- laser beam machines for high quality welding and cutting. Calibration of instruments for measurement of gas flow and pressure
BS EN ISO 15618-1
2002
Qualification testing of welders for under-water welding. Diver-welders for hyperbaric wet welding
BS EN ISO 15618-2
2002
Qualification testing of welders for under-water welding. Diver-welders and welding operators for hyperbaric dry welding
BS EN ISO 15620
2000
Welding. Friction welding of metallic materials
BS EN ISO 15630-1
2002
Steel for the reinforcement and prestressing of concrete. Test methods. Reinforcing bars, wire rod and wire
BS EN ISO 15630-2
2002
Steel for the reinforcement and prestressing of concrete. Test methods. Welded fabric
BS EN ISO 15630-3
2002
Steel for the reinforcement and prestressing of concrete. Test methods. Prestressing steel
BS EN ISO 15641
2001
Milling cutters for high speed machining. Safety requirements
BS EN ISO 15667
2000
Acoustics. Guidelines for noise control by enclosures and cabins
BS EN ISO 15680
2003
Water quality. Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
BS EN ISO 15682
2001
Water quality. Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection
BS EN ISO 15695
2001
Vitreous and porcelain enamels. Determination of scratch resistance of enamel finishes
BS EN ISO 15700
1999
Leather. Tests for colour fastness. Colour fastness to water spotting
BS EN ISO 15701
1999
Leather. Tests for colour fastness. Colour fastness to migration into plasticized poly (vinyl chloride)
BS EN ISO 15702
2000
Leather. Tests for colour fastness. Colour fastness to machine washing
BS EN ISO 15703
1999
Leather. Tests for colour fastness. Colour fastness to mild washing
BS EN ISO 15721
2001
Metallic coatings. Porosity tests. Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour
BS EN ISO 15744
2002
Hand-held non-electric power tools. Noise measurement code. Engineering method (grade 2)
BS EN ISO 15748-1
2002
Ships and marine technology. Potable water supply on ships and marine structures. Planning and design
BS EN ISO 15748-2
2002
Ships and marine technology. Potable water supply on ships and marine structures. Method of calculation
BS EN ISO 15755
2000
Paper and board. Estimation of contraries
BS EN ISO 15761
2002
Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
BS EN ISO 15774
Animal and vegetable fats and oils. Determination of cadmium content by direct graphite furnace atomic absorption spectrometry
BS EN ISO 15783
2003
Seal-less rotodynamic pumps. Class II. Specification
BS EN ISO 15785
2002
Technical drawings. Symbolic presentation and indication of adhesive fold and pressed joints
BS EN ISO 15788-1
2001
Animal and vegetable fats and oils. Determination of stigmastadienes in vegetable oils. Method using capillary-column gas chromatography (Reference method)
BS EN ISO 15798
2001
Ophthalmic implants. Ophthalmic viscosurgical devices
BS EN ISO 15831
2004
Clothing. Physiological effects. Measurement of thermal insulation by means of a thermal manikin
BS EN ISO 15882
2003
Sterilization of health care products. Chemical indicators. Guidance for selection, use and interpretation of results
BS EN ISO 15913
2003
Water quality. Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization
BS EN ISO 15927-1
2003
Hygrothermal performance of buildings. Calculation and presentation of climatic data. Monthly means of single meteorological elements
BS EN ISO 15973
2001
Closed and blind rivets with break pull mandrel and protruding head. AIA/St
BS EN ISO 15974
2001
Closed and blind rivets with break pull mandrel and countersunk head. AIA/St
BS EN ISO 15975
2002
Closed end blind rivets with break pull mandrel and protruding head. AI/AIA
BS EN ISO 15976
2002
Closed end blind rivets with break pull mandrel and protruding head. St/St
BS EN ISO 15977
2002
Open end blind rivets with break pull mandrel and protruding head. AIA/St
BS EN ISO 15978
2002
Open end blind rivets with break pull mandrel and countersunk head. AIA/St
BS EN ISO 15979
2002
Open end blind rivets with break pull mandrel and protruding head. St/St
BS EN ISO 15981
2002
Open end blind rivets with break pull mandrel and protruding head. AIA/AIA
BS EN ISO 15982
2002
Open end blind rivets with break pull mandrel and countersunk head. AIA/AIA
BS EN ISO 15983
2002
Open end blind rivets with break pull mandrel and protruding head. A2/A2
BS EN ISO 15984
2002
Open end blind rivets with break pull mandrel and countersunk head. A2/A2
BS EN ISO 16017-1
2001
Indoor, ambient and workplace air. Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography. Pumped sampling
BS EN ISO 16017-2
2003
Indoor, ambient and workplace air. Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography. Diffusive sampling
BS EN ISO 16021
2001
Urine-absorbing aids. Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers
BS EN ISO 16048
2003
Passivation of corrosion-resistant stainless-steel fasteners
BS EN ISO 16054
2002
Implants for surgery. Minimum data sets for surgical implants
BS EN ISO 16070
2002
Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples
BS EN ISO 16091
2002
Space systems. Integrated logistic support
BS EN ISO 16104
2003
Packaging. Transport packaging for dangerous goods. Test methods
BS EN ISO 16140
2003
Microbiology of food and animal feeding stuffs. Protocol for the validation of alternative methods
BS EN ISO 16147
2002
Small craft. Inboard diesel engines. Engine-mounted fuel and electrical components
BS EN ISO 16264
2004
Water quality. Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
BS EN ISO 16284
2001
Ophthalmic optics. Information interchange for ophthalmic optical equipment
BS EN ISO 16330
2003
Reciprocating positive displacement pumps and pump units. Technical requirements
BS EN ISO 16348
2003
Metallic and other inorganic coatings. Definitions and conventions concerning appearance
BS EN ISO 16426
2002
Fasteners. Quality assurance system
BS EN ISO 16484-5
2003
Building automation and control systems. Data communication protocol
BS EN ISO 16582
2002
Open end blind rivets with break pull mandrel and protruding head. Cu/St or Cu/Br or Cu/SSt
BS EN ISO 16583
2002
Open end blind rivets with break pull mandrel and countersunk head. Cu/St or Cu/Br or Cu/SSt
BS EN ISO 16584
2002
Open end blind rivets with break pull mandrel and protruding head. NiCu/St or NiCu/SSt
BS EN ISO 16585
2002
Closed end blind rivets with pull mandrel and protruding head. A2/SSt
BS EN ISO 16588
2003
Water quality. Determination of six complexing agents. Gas-chromatographic method
BS EN ISO 16654
2001
Microbiology of food and animal feeding stuffs. Horizontal method for the detection of Escherichia coli O157
BS EN ISO 16663-1
2003
Fishing nets. Method of test for the determination of mesh size. Opening of mesh
BS EN ISO 16663-2
2003
Fishing nets. Method of test for the determination of mesh size. Length of mesh
BS EN ISO 16671
2003
Ophthalmic implants. Irrigating solutions for ophthalmic surgery
BS EN ISO 16672
2003
Ophthalmic implants. Ocular endotamponades
BS EN ISO 16744
2003
Dentistry. Base metal materials for fixed dental restorations
BS EN ISO 16812
2003
Petroleum and natural gas industries. Shell-and-tube heat exchangers
BS EN ISO 16871
2003
Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering
BS EN ISO 16931
2001
Animal and vegetable fats and oils. Determination of polymerized triglycerides content by high performance size-exclusion chromatography (HPSEC)
BS EN ISO 17186
2002
Leather. Physical and mechanical tests. Determination of surface coating thickness
BS EN ISO 17189
2003
Butter, edible oil emulsions and spreadable fats. Determination of fat content (Reference method)
BS EN ISO 17227
2002
Leather. Physical and mechanical tests. Determination of dry heat resistance of leather
BS EN ISO 17235
2002
Leather. Physical and mechanical tests. Determination of softness
BS EN ISO 17236
2002
Leather. Physical and mechanical tests. Determination of extension set
BS EN ISO 17287
2003
Road vehicles. Ergonomic aspects of transport information and control systems. Procedure for assessing suitability for use while driving
BS EN ISO 17495
2003
Water quality. Determination of selected nitrophenols. Method by solid-phase extraction and gas chromatography with mass spectrometric detection
BS EN ISO 17510-2
2003
Sleep apnoea breathing therapy. Masks and application accessories
BS EN ISO 17511
2003
In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control materials
BS EN ISO 17526
2003
Optics and optical instruments. Lasers and laser-related equipment. Lifetime of lasers
BS EN ISO 17652-1
2003
Welding. Test for shop primers in relation to welding and allied processes. General requirements
BS EN ISO 17652-3
2003
Welding. Test for shop primers in relation to welding and allied processes. Thermal cutting
BS EN ISO 17652-4
2003
Welding. Test for shop primers in relation to welding and allied processes. Emission of fumes and gases
BS EN ISO 17653
2003
Destructive tests on welds in metallic materials. Torsion test of resistance spot welds
BS EN ISO 17654
2003
Destructive tests on welds in metallic materials. Resistance welding. Pressure test on resistance seam welds
BS EN ISO 17655
2003
Destructive tests on welds in metallic materials. Method for taking samples for delta ferrite measurement
BS EN ISO 17664
2004
Sterilization of medical devices. Information to be provided by the manufacturer for the processing of resterilizable medical devices
BS EN ISO 17708
2003
Footwear. Test methods for whole shoe. Upper sole adhesion
BS EN ISO 17776
2002
Petroleum and natural gas industries. Offshore production installations. Guidance on tools and techniques for hazard identification and risk assessment
BS EN ISO 17834
2003
Thermal spraying. Coatings for protection against corrosion and oxidation at elevated temperatures
BS EN ISO 17993
2003
Water quality. Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction
BS EN ISO 18104
2003
Health informatics. Integration of a reference terminology model for nursing
BS EN ISO 18153
2003
In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
BS EN ISO 18265
2003
Metallic materials. Conversion of hardness values
BS EN ISO 18273
2004
Welding consumables. Wire electrodes, wires and rods for welding of aluminium and aluminium alloys. Classification
BS EN ISO 18274
2004
Welding consumables. Solid wires, strips and rods for fusion welding of nickel and nickel alloys. Classification
BS EN ISO 18279
2003
Brazing. Imperfections in brazed joints
BS EN ISO 18513
2003
Tourism services. Hotels and other types of tourism accommodation. Terminology
BS EN ISO 18609
2001
Animal and vegetable fats and oils. Determination of unsaponifiable matter. Method using hexane extraction
BS EN ISO 18812
2003
Health informatics. Clinical analyser interfaces to laboratory information systems. Use profiles
BS EN ISO 19011
2002
Guidelines for quality and/or environmental management systems auditing
BS EN ISO 19219
2003
Animal and vegetable fats and oils. Determination of visible foots in crude fats and oils
BS EN ISO 19900
2002
Petroleum and natural gas industries. General requiremenents for offshore structures
BS EN ISO 19901-4
2003
Petroleum and natural gas industries. Specific requirements for offshore structures. Geotechnical and foundation design considerations
BS EN ISO 19901-5
2003
Petroleum and natural gas industries. Specific requirements for offshore structures. Weight control during engineering and construction
BS EN ISO 20482
2003
Metallic materials. Sheet and strip. Erichsen cupping test
BS EN ISO 20623
2003
Petroleum and related products. Determination of the extreme-pressure and anti-wear properties of fluids. Four ball method (European conditions)
BS EN ISO 20764
2003
Petroleum and related products. Preparation of a test portion of high-boiling liquids for the determination of water content. Nitrogen purge method
BS EN ISO 20783-1
2003
Petroleum and related products. Determination of emulsion stability of fire-resistant fluids. Fluids in category HFAE
BS EN ISO 20783-2
2003
Petroleum and related products. Determination of emulsion stability of fire-resistant fluids. Fluids in category HFB
BS EN ISO 20823
2003
Petroleum and related products. Determination of the flammability characteristics of fluids in contact with hot surfaces. Manifold ignition test
BS EN ISO 21227-1
2003
Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging. General guidance
BS EN ISO 21269
2004
Hexagon socket head cap screws with metric fine pitch thread
BS EN ISO 21533
2003
Dentistry. Reusable cartridge syringes intended for intraligamentary injections
BS EN ISO 21627-1
2003
Plastics. Epoxy resins. Determination of chlorine content. Inorganic chlorine
BS EN ISO 21627-2
2003
Plastics. Epoxy resins. Determination of chlorine content. Easily saponifiable chlorine
BS EN ISO 21627-3
2003
Plastics. Epoxy resins. Determination of chlorine content. Total chlorine
BS EN ISO 21670
2003
Hexagon weld nuts with flange
BS EN ISO 23429
2004
Gauging of hexagon sockets