How Do I
BSI Standards List
Standard
Year
Title
Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Washing tunnels
Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Washer-extractors
Crude petroleum. Transfer accountability. Guidelines for cargo inspection
Soft soldering fluxes. Test methods. Surface insulation resistance comb test and electrochemical migration test of flux residues
Alpine ski-bindings. Safety requirements and test methods
Cigarettes. Determination of ventilation. Definitions and measurement principles
Forestry machinery. Portable chain-saws. Kickback test
Cinematography. Background acoustic noise levels in the theatres, review rooms and dubbing rooms
Metallic and other inorganic coatings. Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
Metallic and other inorganic coatings. Post-coating treatments of iron and steel to reduce the risk of hydrogen embrittlement
Acoustics. Characterization of sources of structure-borne sound with respect to sound radiation from connected structures. Measurement of velocity at the contact points of machinery when resiliently mounted
Whole milk. Determination of milkfat, protein and lactose content. Guidance on the operation of mid-infrared instruments
Rubber seals. Joint rings for pipelines for hot-water supply, drainage and sewerage up to 110 C. Specification for the material
Cycle chains. Characteristics and test methods
Aircraft ground support equipment. Tow bars
Series 1 freight containers. Interface connections for tank containers
Freight containers. Information related to containers on board vessels. Bay plan system
Freight containers. Information related to containers on board vessels. Telex data transmission
Photography. Processed vesicular photographic film. Specifications for stability
Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Security key and certificate management message (message type KEYMAN)
Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax service directories
Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax rules common to all parts
Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax rules specific to batch EDI
Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax rules specific to interactive EDI
Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax and service report message for batch EDI (message type - CONTRL)
Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Security rules for batch EDI (authenticity, integrity and non-repudiation of origin)
Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Secure authentication and acknowledgement message (message type AUTACK)
Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Security rules for batch EDI (confidentiality)
Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Associated data in EDI
Eye-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope. Dimensions and loads
Eye-ends, in corrosion resisting steel, swaged on aircraft control wire rope. Dimensions and loads
Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
Fork-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope turnbarrels. Dimensions and loads
Fork-ends, in corrosion-resistant steel, threaded, for rolling bearings, for aircraft control wire rope. Dimensions and loads
Fork ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
Aerospace. Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings. Dimensions and loads
Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles. Dimensions
Aircraft control wire rope assemblies. Dimensions and end-fitting combinations
Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame
Raw optical glass. Vocabulary
Road vehicles. Passenger-car and trailer combinations. Lateral stability test
Alpine ski-bindings. Test soles for ski-binding tests
Oil of cedarwood, Chinese type (Cupressus funebris, Endlicher)
Optics and optical instruments. Geodetic and surveying instruments. Vocabulary
Freight containers. Container equipment data exchange (CEDEX). General communication codes
Equipment for crop protection. Test methods for air-assisted sprayers for bush and tree crops
Textile machinery and accessories. Main dimensions for section wires for metallic card clothing. Foot without interlocking or interchaining
Textile machinery and accessories. Main dimensions for section wires for metallic card clothing. Foot with interchaining
Ergonomics of the thermal environment. Estimation of the thermal insulation and evaporative resistance of a clothing ensemble
Ergonomic assessment of speech communication. Speech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method)
Micrographics. Transparent A6 microfiche. Image arrangements
Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
Textile machinery and accessories. Two-for-one twisters. Vocabulary
Belt drives. Pulleys and V-ribbed belts for the automotive industry. PK profile:dimensions
Belt drives. Pulleys and V-ribbed belts for industrial applications. PH, PJ, PK, PL and PM profiles. Dimensions
Plastics. Polyoxymethylene (POM) moulding and extrusion materials. Designation system and basis for specifications
Plastics. Polyoxymethylene (POM) moulding and extrusion materials. Preparation of test specimens and determination of properties
Quality management. Guidelines for quality plans
Quality management systems. Guidelines for quality management in projects
Quality management systems. Guidelines for configuration management
Guidelines for developing quality manuals
Quality management. Guidelines for training
Banking and related financial services. Information interchange. Documentary credit form
Alpine skis. Binding mounting area. Requirements for test screws
Internal combustion compression-ignition engines. Measurement apparatus for smoke from engines operating under steady-state conditions. Filter type smokemeter
Mechanical vibration. Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles
Tools for pressing. Ball-lock punches. Ball-lock punches for light duty
Tools for moulding. Sprue bushes. Dimensions
Classification of dense shaped refractory products. Alumina-silica
Classification of dense shaped refractory products. Basic products containing less than 7% residual carbon
Classification of dense shaped refractory products. Basic products containing from 7 % to 50 % residual carbon
Coal. Methods for evaluating flocculants for use in coal preparation. Flocculants as filter aids in rotary vacuum filtration systems
Pneumatic fluid power. Cylinders. Final examination and acceptance criteria
Hydraulic fluid power. Cylinders. Acceptance tests
Assembly tools for screws and nuts. Double-headed open-ended engineers' wrenches. Length of wrenches and thickness of the heads
Assembly tools for screws and nuts. Double-headed, flat and offset, box wrenches. Length of wrenches and thickness of the heads
Assembly tools for screws and nuts. Double-headed, deep offset and modified offset, box wrenches. Length of wrenches and thickness of the heads
Optics and optical instruments. Environmental requirements. Test requirements for telescopic systems
Optics and optical instruments. Environmental requirements. Test requirements for optical measuring instruments
Optics and optical instruments. Environmental requirements. Optical instruments for outdoor conditions of use
Optics and optical instruments. Environmental requirements. Conditions of transport for optical instruments
Optics and optical instruments. Preparation of drawings for optical elements and systems. General
Optics and optical instruments. Preparation of drawings for optical elements and systems. Material imperfections. Stress birefringence
Optics and optical instruments. Preparation of drawings for optical elements and systems. Material imperfections. Bubbles and inclusions
Optics and optical instruments. Preparation of drawings for optical elements and systems. Material imperfections. Inhomogeneity and striae
Optics and optical instruments. Preparation of drawings for optical elements and systems. Surface form tolerances
Optics and optical instruments. Preparation of drawings for optical elements and systems. Centring tolerances
Optics and optical instruments. Preparation of drawings for optical elements and systems. Surface imperfection tolerances
Optics and optical instruments. Preparation of drawings for optical elements and systems. Surface texture
Optics and optical instruments. Preparation of drawings for optical elements and systems. Surface treatment and coating
Optics and optical instruments. Preparation of drawings for optical elements and systems. Table representing data of a lens element
Optics and optical instruments. Preparation of drawings for optical elements and systems. Non-toleranced data
Optics and optical instruments. Preparation of drawings for optical elements and systems. Aspheric surfaces
Optics and optical instruments. Preparation of drawings for optical elements and systems. Laser irradiation damage threshold
Optics and optical instruments. Preparation of drawings for optical elements and systems. Wavefront deformation tolerance
Carbon fibre. Determination of density
Banking. Procedures for message encipherment (wholesale). General principles
Banking. Procedures for message encipherment (wholesale). DEA algorithm
Technical drawings. Simplified representation of moulded, cast and forged parts
Light gauge metal containers. Three-piece necked-in tinplate aerosol cans. Dimensions of the top end
Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications
Information and documentation. Open systems interconnection. Interlibrary loan application service definition
Information and documentation. Open systems interconnection. Search and retrieve application service definition
Micrographics. Reader-printers for transparent microforms. Characteristics
Micrographics. Rotary camera for 16 mm microfilm. Mechanical and optical characteristics
Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cards. Transaction process
Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cards. Secure application modules
Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cards. Use of algorithms
Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cards. Key management
Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cards. General principles and overview
Technical product documentation. Vocabulary. Terms relating to technical drawings: General and types of drawings
Photography. Processed photographic materials. Filing enclosures for storage
Textile machinery. Flat warp knitting machines. Numbering of guide bars
Human/human surrogate impact (single shock) testing and evaluation. Guidance on technical aspects
Cross-country skis. Binding mounting area. Requirements for test screws
Motorcycle tyres. Test methods for verifying tyre capabilities
Tools for pressing. Punch holder shanks. Type A
Corrosion of metals and alloys. Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
Textiles. Cotton yarns. Specifications
Fire-resistance tests. Fire dampers for air distribution systems. Test method
Fire-resistance tests. Fire dampers for air distribution systems. Classification, criteria and field of application of test results
Fire-resistance tests. Fire dampers for air distribution systems. Guidance on the test method
Fire-resistance tests. Fire dampers for air distribution systems. Test of thermal release mechanism
Aerospace. Rivets, solid. Material and metric series identification
Calculation of load capacity of bevel gears. Calculation of load capacity of bevel gears. Introduction and general influence factors
Calculation of load capacity of bevel gears. Calculation of tooth root strength
Industrial automation systems and integration. Product data representation and exchange. Overview and fundamental principles
Industrial automation systems and integration. Product data representation and exchange. Description methods: the EXPRESS language reference manual
Industrial automation systems and integration. Product data representation and exchange. Implementation methods. Clear text encoding of the exchange structure
Industrial automation systems and integration. Product data representation and exchange. Implementation methods. Standard data access interface
Industrial automation systems and integration. Product data representation and exchange. Conformance testing methodology and framework: general concepts
Industrial automation systems and integration. Product data representation and exchange. Conformance testing methodology and framework: Requirements on testing laboratories and clients
Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources. Fundamentals of product description and support
Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources. Geometric and topological representation
Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources: Representation structures
Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources: Product structure configuration
Industrial automation systems and integration. Product data representation and exchange. Integrated generic resource: Materials
Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources: visual presentation
Industrial automation systems and integration. Product data representation and exchange. Integrated generic resource. Shape variation tolerances
Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources: Process structure and properties
Industrial automation systems and integration. Product data representation and exchange. Integrated application resources: Draughting
Industrial automation systems and integration. Product data representation and exchange. Application protocol: Explicit draughting
Industrial automation systems and integration. Product data representation and exchange. Application protocol. Configuration controlled design
Ambient air. Determination of asbestos fibres. Direct-transfer transmission electron microscopy method
Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Application to railway vehicles
Prosthetics.Structural testing of lower-limb prostheses. Test configurations
Prosthetics.Structural testing of lower-limb prostheses. Test samples
Prosthetics.Structural testing of lower-limb prostheses. Principal structural tests
Prosthetics.Structural testing of lower-limb prostheses. Loading parameters of principal structural tests
Prosthetics.Structural testing of lower-limb prostheses. Supplementary structural tests
Prosthetics.Structural testing of lower-limb prostheses. Loading parameters of supplementary structural tests
Prosthetics.Structural testing of lower-limb prostheses. Test submission document
Prosthetics.Structural testing of lower-limb prostheses. Test report
Photography. Synchronizers, ignition circuits and connectors for cameras and photoflash units. Electrical characteristics and test methods
Worm gears. Geometry of worms. Name plates for worm gear units, centre distances, information to be supplied to gear manufacturer by the purchaser
Photography. Processing wastes. Determination of silver content
Photography. Photographic-grade chemicals. Test methods. General
Photography. Photographic-grade chemicals. Test methods. Determination of volatile matter
Photography. Photographic-grade chemicals. Test methods. Determination of pH
Cinematography. Storage and handling of nitrate-base motion-picture films
Textile floor coverings. Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers
Freight thermal containers. Remote condition monitoring
Fibre reinforced plastics. Braided tapes for composite materials reinforcement. Basis for a specification
Hydraulic fluid power. Four-and five-port servovalves. Mounting surfaces
Soil quality. Sampling. Guidance on the design of sampling programmes
Soil quality. Sampling. Guidance on sampling techniques
Soil quality. Sampling. Guidance on safety
Petroleum and natural gas industries. Care and use of casing and tubing
Petroleum and natural gas industries. Field testing of drilling fluids. Water-based fluids
Petroleum and natural gas industries. Field testing of drilling fluids. Oil-based fluids
Petroleum and natural gas industries. Drilling fluids. Laboratory testing
Steel wire ropes for the petroleum and natural gas industries. Minimum requirements and terms of acceptance
Petroleum and natural gas industries. Cements and materials for well cementing. Testing of deepwater well cement formulations
Textile machinery. Dyeing and finishing machines. Nominal speeds
Textile machinery. Square bars for winding devices relating to dyeing and finishing machines. Dimensions
Textile machinery. Dyeing and finishing machines. Designation of operating ranges of component parts
Widening test on nuts
Gas turbines and gas turbine sets. Measurement of emitted airborne noise. Engineering/survey method
Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above. Additional stability tests
CIE standard illuminants for colorimetry
Packaging. Complete, filled transport packages. Stability testing of unit loads
Animal and vegetable fats and oils. Determination of phosphorus content. Colorimetric method
Animal and vegetable fats and oils. Determination of phosphorus content. Method using graphite furnace atomic absorption spectrometry
Animal and vegetable fats and oils. Determination of phosphorus content. Method using inductively coupled plasma (ICP) optical emission spectroscopy
Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems. Requirements and test methods for all systems
Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems. Four-point strap-type tiedown systems
Micrographics. Planetary camera systems. Test target for checking performance
Horology. Procedure for evaluating the accuracy of quartz watches
Technical drawings. Tolerancing of orientation and location. Projected tolerance zone
Technical drawings. Dimensioning and tolerancing. Non-rigid parts
Information and documentation. Armenian alphabet coded character set for bibliographic information interchange
Micrographics. Rotary camera systems. Test target for checking performance
Photography. Processed silver-gelatin type black-and-white film. Specifications for stability
Hydraulic agricultural sprayers. Data sheets. Technical specifications related to components
Refractory products. Methods of test for ceramic fibre products.
Photography. Processing chemicals. Specification for anhydrous sodium thiosulfate and sodium thiosulfate pentahydrate
Light-gauge metal containers. Round open-top cans. Cans defined by their nominal gross lidded capacities
Light gauge metal containers. Round open-top cans. Cans for liquid products with added gas, defined by their nominal filling volumes
Hexagon nuts with flange. Fine pitch thread
Jewellery. Gold alloy coatings
Cork stoppers. Enumeration of colony-forming units of yeasts, moulds and bacteria capable of gStandardth in an alcoholic medium
Acceptance sampling plans and procedures for the inspection of bulk materials
Tea and instant tea in solid form. Determination of caffeine content. Method using high-performance liquid chromatography
Information and documentation. Extension of the Cyrillic alphabet coded character set for non-Slavic languages for bibliographic information interchange
Graphic technology. Prepress digital data exchange. Online transfer from electronic prepress systems to colour hardcopy devices
Hydraulic fluid power. Cylinder mounting dimensions. 10 MPa (100 bar) series
Hydraulic fluid power. Cylinders. Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components. Precision method for pumps
Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components. Simplified method for pumps
Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components. Method for motors
Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for four-way directional flow control valves
Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for three-way directional flow control valves
Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Test method
Paper, board and pulps. Determination of cadmium content. Atomic absorption spectrometric method
Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
Test conditions for machining centres. Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)
Test conditions for machining centres. Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
Test conditions for machining centres. Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)
Test conditions for machining centres. Accuracy and repeatability of positioning of linear and rotary axes
Test conditions for machining centres. Accuracy and repeatability of positioning of work-holding pallets
Test conditions for machining centres. Accuracy of feeds, speeds and interpolations
Test conditions for machining centres. Accuracy of a finished test piece
Test conditions for machining centres. Evaluation of contouring performance in the three coordinate planes
Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner. Metric series
Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner. Inch series
Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner. Technical specification
Mechanical vibration. Susceptibility and sensitivity of machines to unbalance
Mechanical vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains
Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Machine sets in hydraulic power and pumping plants
Rotating shaft vibration measuring systems. Relative and absolute sensing of radial vibration
Guidance on the selection of roller chain drives
Textile floor coverings. Non-destructive measurement of pile thickness above the backing. WRONZ gauge method
Iron ores. Method of sampling and sample preparation for physical testing
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Metal fittings for pipes of nominal outside diameter less than or equal to 63mm
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Metal fittings for pipes of nominal outside diameter greater than 63mm
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63mm
Plastics. Guidance for the use of standard fire tests
Acoustics. Specification of test tracks for the purpose of measuring noise emitted by road vehicles
Manually portable brush-cutters and grass trimmers with internal combustion engine. Determination of sound power levels. Engineering method (grade 2)
Tool holders with cylindrical shank. Cylindrical shank, location bore. Technical delivery conditions
Tool holders with cylindrical shank. Type A, shanks for tool holders of special designs
Tool holders with cylindrical shank. Type B with rectangular radial seat
Tool holders with cylindrical shank. Type C with rectangular axial seat
Tool holders with cylindrical shank. Type D with more than one rectangular seat
Tool holders with cylindrical shank. Type E with cylindrical seat
Tool holders with cylindrical shank. Type F with taper seat
Tool holders with cylindrical shank. Type Z, accessories
Collets for tool holders with taper ratio 1:10. Collets, holders, nuts
Assembly tools for screws and nuts. Sockets and wrenches for spline drive
Plastics piping systems for industrial applications. Poly (vinylidene fluoride). General
Plastics piping systems for industrial applications. Poly (vinylidene fluoride). Pipes
Plastics piping systems for industrial applications. Poly (vinylidene fluoride). Fittings
Optics and optical instruments. Vocabulary for microscopy. Light microscopy
Optics and optical instruments. Operation microscopes. Requirements and test methods
Optics and optical instruments. Operation microscopes. Light hazard from operation microscopes used in ocular surgery
Hydraulic fluid power. Gas-loaded accumulators with separator. Selection of preferred hydraulic ports
End-fittings and turnbarrels for aircraft control wire rope. Technical specification
Aerospace. MJ threads. Gauging
Securities and related financial instruments. Classification of Financial Instruments (CFI code)
Textile floor coverings. Determination of electrical resistance
Cranes. Requirements for mechanisms. General
Agricultural wheeled tractors. Steering requirements
Adhesives. Determination of shear behaviour of structural adhesives. Torsion test method using butt-bonded hollow cylinders
Adhesives. Determination of shear behaviour of structural adhesives. Tensile test method using thick adherends
Essential oils. Determination of water content. Karl Fischer method
Liquorice extracts (Glycyrrhiza glabra L.). Determination of glycyrrhizic acid content. Methods using high-performance liquid chromatography
Workplace air. Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour. Method by hydride generation and atomic absorption spectrometry
Gas turbines. Exhaust gas emission. Measurement and evaluation
Gas turbines. Exhaust gas emission. Automated emission monitoring
Sensory analysis. Methodology. Magnitude estimation method
Aerospace. Aircraft de-icing/anti-icing methods with fluids
Gas turbines. Vocabulary
Assembly, adjustment and inspection of an alpine ski-binding-boot (S-B-B) system
Machine tools. Test conditions for die sinking electrodischarge machines (EDM). Terminology and testing of accuracy. Single column machines (cross slide table type and fixed table type)
Machine tools. Test conditions for die sinking electrodischarge machines (EDM). Terminology and testing of accuracy. Two column machines (slide-head type and cross-slide table type)
Paper and board. Testing of cores. Sampling
Paper and board. Testing of cores. Co-ordinating of test samples
Paper and board. Testing of cores. Determination of moisture content using the oven drying method
Paper and board. Testing of cores. Measurement of dimensions
Paper and board. Testing of cores. Determination of characteristics of concentric rotation
Paper and board. Testing of cores. Determination of bending strength by the three-point method
Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis
Paper and board. Testing of cores. Determination of flat crush resistance
Linear calibration using reference materials
Road vehicles. Pedestrian protection. Impact test method for pedestrian thigh, leg and knee
Space data and information transfer systems. Time code formats
Information and documentation. Archival paper. Requirements for permanence and durability
Road vehicles. Brake lining assemblies. Inertia dynamometer test method
Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HR, HV and HG
Socket wrenches for spark and glow plugs
Hydraulic fluid power. Filter elements. Sequence of tests for verifying performance characteristics
Hydraulic fluid power. Calibration of automatic particle counters for liquids
Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electro-thermal atomic absorption spectrometric method
Gas mixers for medical use. Stand-alone gas mixers
Textiles. Web formation and bonding in nonwovens. Vocabulary
Rubber compounding ingredients. Sulfenamide accelerators. Test methods
Cycles. Luggage carriers for bicycles. Concepts, classification and testing
Soil quality. Determination of cyanide
Soil quality. Determination of redox potential. Field method
Tea. Classification of grades by particle size analysis
Corrosion of metals and alloys. Guidelines for selection of protection methods against atmospheric corrosion
Photography. Sheets of sensitized material for the pre-press industry. Dimensions and related requirements
Photography. Disposable cassettes containing photocomposition film and paper. Dimensions and related requirements
Photography. Projectors. Image size/projection distance calculations
Photography. Projection in indoor rooms. Classification of transmitting projection screens and measurement of their transmitted luminance levels
Photography. Projection of still pictures. Measuring methods for the evaluation of imaging properties
Cardiac defibrillators. Connector assembly DF-1 for implantable defibrillators. Dimensions and test requirements
Iron ore and direct reduced iron. Vocabulary
Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic hydrocarbons. Sampling
Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic hydrocarbons. Sample preparation, clean-up and determination
Mechanical vibration. Methods and criteria for the mechanical balancing of flexible rotors
Rubber. Assessment of carbon black dispersion. Rapid comparative methods
Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature
Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time
Plastics. Differential scanning calorimetry (DSC). Determination of crystallization kinetics
Plastics. Thermomechanical analysis (TMA). General principles
Plastics. Thermomechanical analysis (TMA). Determination of coefficient of linear thermal expansion and glass transition temperature
Plastics. Thermomechanical analysis (TMA). Determination of penetration temperature
Textile floor coverings. Floor soiling. Test site set-up and soiling evaluation
Textile floor coverings. Laboratory soiling tests. Kappasoil test
Textile floor coverings. Laboratory cleaning procedure using spray extraction
Chemical conversion coatings. Black oxide coating on iron and steel. Specification and test methods
Tools for pressing. Die sets
Tennis rackets. Racket components and physical parameters
Optics and optical instruments. Accuracy of optical transfer function (OTF) measurement
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification
Rubber hoses and hose assemblies for automobile power-steering systems. Specification
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. General requirements and sample dissolution
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of lead content
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of antimony content
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of tin content
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of tellurium content
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of thallium content
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of silver content
Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of indium content
Technical product documentation. Handling of computer-based technical information. Documentation in the conceptual design stage of the development phase
Raw optical glass. Determination of birefringence
Soil quality. Determination of soil water content as a volume fraction using coring sleeves. Gravimetric method
Guidelines for implementation of statistical process control (SPC). Elements of SPC
Corrosion of metals and alloys. Evaluation of pitting corrosion
Paper and board. CIE whiteness, D65/10 degrees (outdoor daylight)
Paper and board. Determination of CIE whiteness, C/2° (indoor illumination conditions)
Pulp, paper and board. Determination of total chlorine and organically bound chlorine
Hydraulic fluid power. Determination of particulate contamination by automatic counting using the light extinction principle
Machinery for forestry. Tracked special machines. Performance criteria for brake systems
Agricultural grain driers. Determination of drying performance. Additional procedures and crop-specific requirements
Securities. Scheme for interdepository message type
Milling cutters. Designation. Shank type and bore type milling cutters with indexable inserts
Paper and board. Determination of curl using a single vertically suspended test piece
Ageing of thermal insulation materials. Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
Crude petroleum and petroleum products. Bulk cargo transfer. Guidelines for achieving the fullness of pipelines
Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Naphthylethylenediamine photometric method
Road vehicles. Spark plugs. Test methods and requirements
Carbon fibre. Determination of filament diameter and cross-sectional area
Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste
Paper and board. Calibration of variable-area flowmeters
Clothing for protection against heat and flame. Test methods and performance requirements for heat-protective clothing
Reciprocating internal combustion compression-ignition engines. Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
Information and documentation. Library performance indicators
Graphic technology. Prints and printing inks. Determination of resistance of prints to acids
Cranes. Measurement of wheel alignment
Measurement of fluid flow. Methods of specifying flowmeter performance
Stationary source emissions. Determination of mass concentration of sulfur dioxide. Ion chromatography method
Statistical aspects of sampling from bulk materials. General principles
Statistical aspects of sampling from bulk materials. Sampling of particulate materials
Brush-cutters and grass trimmers. Technical data
Micrographics. Methods of measuring image quality produced by aperture card scanners. Quality criteria and control
Pneumatic fluid power. Identification of ports and control mechanisms of control valves and other components
Space data and information transfer systems. Telemetry channel coding
Corrosion of metal and alloys. Corrosion fatigue testing. Cycles to failure testing
Corrosion of metal and alloys. Corrosion fatigue testing. Crack propagation testing using precracked specimens
Tractors and machinery for agriculture and forestry. Serial control and communications data network. Physical layer
Tractors and machinery for agriculture and forestry. Serial control and communications data network. Data link layer
Tractors and machinery for agriculture and forestry. Serial control and communications data network. Implement messages application layer
Tractors and machinery for agriculture and forestry. Serial control and communications data network. Tractor ECU
Radio-frequency identification of animals. Code structure
Radio-frequency identification of animals. Technical concept
Agricultural tractors and machinery. Tractor mounted sensor interface. Specification
Machinery for agriculture and forestry. Data interchange between management computer and process computers. Data interchange syntax
Electronic data interchange between information systems in agriculture. Agricultural data element dictionary. General description
Electronic data interchange between information systems in agriculture. Agricultural data element dictionary. Pig farming
Information and documentation. Permanence and durability of writing, printing and copying on paper. Requirements and test methods
Information and documentation. Requirements for binding materials and methods used in the manufacture of books
Integrated optics. Vocabulary. Basic terms and symbols
Integrated optics. Vocabulary. Terms used in classification
Milk and milk products. Determination of zinc content. Flame atomic absorption spectrometric method
Dried milk. Assessment of heat treatment intensity. Method using high-performance liquid chromatography
Information and documentation. Extension of the Arabic alphabet coded character set for bibliographic information interchange
Plastics. Unplasticized poly(vinyl chloride) sheets. Tapes, dimensions and characteristics. Sheets of thickness not less than 1 mm
Plastics. Unplasticized poly(vinyl chloride) sheets. Tapes, dimensions and characteristics. Sheets of thickness less than 1 mm
Road vehicles and internal combustion engines. Filter vocabulary. Definitions of filters and filter components
Road vehicles and internal combustion engines. Filter vocabulary. Definitions of characteristics of filters and their components
Capability of detection. Methodology for determination of the critical value for the response variable when no calibration data are used
Capability of detection. Methodology for comparing the minimum detectable value with a given value
Capability of detection. Terms and conditions
Capability of detection. Methodology in the linear calibration case
Corrosion of metals and alloys. Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
Textile floor coverings. Determination of friability of attached foams
Textile floor coverings. Pure wool, hand-knotted pile carpets. Specification
Textile floor coverings. Jute carpet backing fabric. Specification
Textile floor coverings. Coir mats. Types and specification
Milk and milk products. Enumeration of presumptive Escherichia coli. Most probable number technique
Milk and milk products. Enumeration of presumptive Escherichia coli. Most probable number technique using 4-methylumbelliferyl-?-D-glucuronide (MUG)
Milk and milk products. Enumeration of presumptive Escherichia coli. Colony-count technique at 44°C using membranes
Milk and milk products. Determination of fat content. General guidance on the use of butyrometric methods
Building construction machinery and equipment. Pile driving and extracting equipment. Terminology and commercial specifications
Tools for pressing. Ball-lock punch retainers. Types C and D, reduced for light duty
Tools for pressing. Gas springs. General specifications
Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Guidance
Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Static method
Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Dynamic decomposition method using a travelling furnace
Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Dynamic decomposition method using a conical radiant heater
Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Metric series
Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Inch-based series
Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame. Multi-source test
Micrographics. Quality control of graphic COM recorders. Characteristics of the test frames
Micrographics. Quality control of graphic COM recorders. Quality criteria and control
Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment
Components for containment enclosures. Transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums
Hydraulic fluid power. On-line automatic particle-counting systems for liquids. Methods of calibration and validation
Round general use light gauge metal containers. Nominal diameters for cylindrical and tapered cans up to 10 000 ml capacity
Urine-absorbing aids. Whole-product testing
Micrographics. Image mark (blip) used with 16 mm and 35 mm roll microfilm
Cranes. Availability. Vocabulary
Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Definitions and review of test methods
Agricultural and forestry tractors. NarStandard-track wheeled tractors. Front-mounted roll-over protective structures
Agricultural and forestry tractors. NarStandard-track wheeled tractors. Rear-mounted roll-over protective structures
Building construction. Organization of information about construction works. Framework for classification of information
Graphic technology. Prints and printing inks. Assessment of light fastness using filtered xenon arc light
Rolling bearings. Single-Standard cylindrical roller bearings. Chamfer dimensions for loose rib and non-rib sides
Rolling bearings. Single-Standard angular contact ball bearings. Chamfer dimensions for outer ring non-thrust side
Dried skimmed milk. Determination of vitamin A content. Colorimetric method
Dried skimmed milk. Determination of vitamin A content. Method using high-performance liquid chromatography
Milk. Determination of calcium content. Titrimetric method
Road vehicles. Airbag components. Testing of inflator assemblies
Road vehicles. Test dust for filter evaluation. Arizona test dust
Road vehicles. Test dust for filter evaluation. Aluminium oxide test dust
Metallic materials. Fatigue testing. Statistical planning and analysis of data
Metallic materials. Fatigue testing. Fatigue crack gStandardth method
Acoustics. Procedures for the measurement of real-ear acoustical characteristics of hearing aids
Plain bearings. Lubrication holes, grooves and pockets. Dimensions, types, designation and their application to bearing bushes
Plain bearings. Tolerances on form and position and surface roughness for shafts, flanges and thrust collars
Plain bearings. Quality assurance of thin-walled half bearings. Design FMEA
Agricultural machinery. Agricultural trailers and trailed equipment. Drawbar jacks
Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
Electronic imaging. Media error monitoring and reporting techniques for verification of stored data on optical digital data disks
Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 8434-3 O-ring face-seal ends
Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings
Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 6162 flange ends
Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Limit
Hollow taper interface with flange contact surface. Shanks. Dimensions
Hollow taper interface with flange contact surface. Receivers. Dimensions
Space data and information transfer systems. Telecommand. Channel service
Paper and board. Compressive strength. Ring crush method
Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet
Photography. Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation
Natural gas. Calculation of compression factors. Introduction and guidelines
Natural gas. Calculation of compression factors. Calculation using a molar composition analysis
Natural gas. Calculation of compression factors. Calculation using measured physical properties
Road vehicles. Direction-of-motion stereotypes for automotive hand controls
Graphic technology. Process control. Offset platemaking
Cinematography. Manufacturer-printed, latent image identification on 16 mm, 35 mm & 65 mm film. Specifications and dimensions
Photography. Electronic still picture cameras. Terminology
Photography. Electronic still-picture cameras. Determination of ISO speed
Photography. Electronic still picture cameras. Resolution measurements
Electronic still-picture imaging. Removable memory. Basic removable-memory module
Electronic still-picture imaging. Removable memory. TIFF/EP image data format
Pneumatic fluid power. Directional control valves. Measurement of shifting time
Spherical plain bearings. Radial spherical plain bearings
Spherical plain bearings. Angular contact radial spherical plain bearings
Spherical plain bearings. Thrust spherical plain bearings
Spherical plain bearings. Spherical plain bearing rod ends
Drives, internal, cruciform, ribbed. Metric series
Aerospace. Gang channel, self-locking, floating, standard series, with counterbore, classifications. 1100 MPa (at ambient temperature)/120°C, 1100 MPa (at ambient temperature)/235°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
Plain bearings. Quality characteristics. Calculation of machine and process capabilities
Plain bearings. Checking of wrapped bushes. Checking the inside diameter
Aerospace. Constant displacement hydraulic motors. General specifications for 35000 kPa systems
Aerospace. Hydraulic, pressure-compensated, variable delivery pumps. General requirements for 35000 kPa systems
Diesel engines. Cleanliness assessment of fuel injection equipment
Road vehicles. Traffic accident analysis. Vocabulary
Road vehicles. Traffic accident analysis. Guidelines for the use of impact severity measures
Agricultural vehicles. Mechanical hook-type connections on towing vehicles. Test methods and requirements
Fire resistance of timber door assemblies. Method of determining the efficacy of intumescent seals
Cranes. Maintenance manual. General
Cinematography. Care and preservation of magnetic audio recordings for motion-pictures and television
Cinematography. Room and surround conditions for evaluating television display from telecine reproduction
Translation-oriented terminography
Graphic technology. Determination of tack of paste inks and vehicles by a rotary tackmeter
Graphic technology. Plates for offset printing. Dimensions
Graphic technology. Blankets for offset printing
Graphic technology. Multilingual terminology of printing arts. Screen printing terms
Graphic technology. Multilingual terminology of printing arts. Screen printing terms
Graphic technology. Prepress digital data exchange. Tag image file format for image technology (TIFF/IT)
Graphic technology. Prepress digital data exchange. CMYK standard colour image data (CMYK/SCID)
Graphic technology. Prepress digital data exchange. Colour targets for input scanner calibration
Graphic technology. Prepress digital data exchange. Input data for characterization of 4-colour process printing
Graphic technology. Determination of rheological properties of paste inks and vehicles by the falling rod viscometer
Graphic technology. Process control. Certified reference material for opaque area calibration of transmission densitometers
Graphic technology. Process control for the manufacture of half-tone colour separations, proof and production prints. Parameters and measurement methods
Graphic technology. Process control for the manufacture of half-tone colour separations, proof and production prints. Offset lithographic processes
Graphic technology. Process control for the manufacture of half-tone colour separations, proof and production prints. Coldset offset lithography and letterpress on newsprint
Graphic technology. Process control for the manufacture of half-tone colour separations, proof and production prints. Screen printing
Graphic technology. Safety requirements for printing press systems
Electronic imaging. Vocabulary
Electronic imaging. Test target for the black-and-white scanning of office documents. Characteristics
Electronic imaging. Test target for the black-and-white scanning of office documents. Method of use
Micrographics. Use of bar codes on aperture cards
Metallic and other inorganic coatings. Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish
Laboratory glassware. Disposable microhaematocrit capillary tubes
Guidelines on types of glass of normal bulk-production composition and their test methods
Reference neutron radiations. Characteristics and methods of production of simulated workplace neutron fields
Nuclear energy. Radiation protection. Individual thermoluminescence dosemeters for extremities and eyes
Methods of evaluation of the lifetime of a battery-powered watch
Petroleum and liquid petroleum products. Calibration of horizontal cylindrical tanks. Manual methods
Petroleum and liquid petroleum products. Calibration of horizontal cylindrical tanks. Internal electro-optical distance-ranging method
Lubricants, industrial oils and related products (class L). Family C (Gears). Specifications for lubricants for enclosed gear systems
Butadiene rubber. Determination of microstructure by infra-red spectrometry
Plastics. Vertical flame spread determination for film and sheet
Fibre-reinforced plastics. Determination of fatigue properties under cyclic loading conditions
Rolling bearings, linear motion, recirculating ball, sleeve type. Accessories
Test conditions for numerically controlled turning machines and turning centres. Geometric tests for machines with a horizontal workholding spindle
Test conditions for numerically controlled turning machines and turning centres. Accuracy and repeatability of positioning of linear and rotary axes
Test conditions for numerically controlled turning machines and turning centres. Evaluation of thermal distortions
Curvilinear toothed synchronous belt drive systems
Cranes. Measurement of velocity and time parameters
Road vehicles. Reduction of misuse risk of child restraint systems. Requirements and test procedures for correct installation (panel method)
Road vehicles. Reduction of misuse risk of child restraint systems. Prediction and assessment of misuse by misuse mode and effect analysis (MMEA)
Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems. Seat bight anchorages and attachments
Road vehicles. Child restraint systems. Report form for accidents involving child passengers
Rubber. Standard reference elastomers (SRE's) for characterizing the effect of liquids on vulcanized rubbers
Fork-lift trucks. Fork-arm extensions and telescopic fork arms. Technical characteristics and strength requirements
Diesel engines. High pressure fuel injection pipe assemblies. General requirements and dimensions
Sensory analysis. Methodology. General guidance for establishing a sensory profile
Sensory analysis. Methods for assessing modifications to the flavour of foodstuffs due to packaging
Iron ores. Determination of zinc content. Flame atomic absorption spectrometric method
Iron ores. Determination of lead content. Flame atomic absorption spectrometric method
Iron ores. Determination of potassium content. Flame atomic absorption spectrometric method
Iron ores. Determination of sodium content. Flame atomic absorption spectrometric method
Determination of particle size distribution by gravitational liquid sedimentation methods. General principles and guidelines
Determination of particle size distribution by gravitational liquid sedimentation methods. Fixed pipette method
Determination of particle size distribution by gravitational liquid sedimentation methods. X-ray gravitational technique
Determination of particle size distribution by centrifugal liquid sedimentation methods. General principles and guidelines
Determination of particle size distribution by centrifugal liquid sedimentation methods. Photocentrifuge method
Determination of particle size distributions. Electrical sensing zone method
Particle size analysis. Laser diffraction methods. General principles
Determination of particle size distribution. Single-particle light interaction methods. Light interaction considerations
Reciprocating internal combustion engines. Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
Determination of the lethal toxic potency of fire effluents
Packaging. Complete, filled transport packages and unit loads. Vertical random vibration test
Petroleum products. Determination of the filterability of lubricating oils. Procedure for oils in the presence of water
Measurement of conductive liquid flow in closed conduits. Flanged electromagnetic flowmeters. Overall length
Condition monitoring and diagnostics of machines. Vibration condition monitoring. General procedures
Condition monitoring and diagnostics of machines. Data processing, communication and presentation. General guidelines
Prosthetics and orthotics. Classification and description of prosthetic components. Classification of prosthetic components
Prosthetics and orthotics. Classification and description of prosthetic components. Description of lower-limb prosthetic components
Prosthetics and orthotics. Classification and description of prosthetic components. Description of upper-limb prosthetic components
Natural gas. Standard reference conditions
Photography. 110-size cartridge, film and backing paper. Dimensions
Nuclear-grade plutonium dioxide powder for fabrication of light water reactor MOX fuel. Guidelines to help in the definition of a product specification
Plastics. Determination of the total luminous transmittance of transparent materials. Double-beam instrument
Acoustics. Measurement of sound absorption properties of road surfaces in situ. Extended surface method
Characterization of pavement texture by use of surface profiles. Terminology and basic requirements related to pavement texture profile analysis
Acoustics. Stationary audible warning devices used outdoors. Field measurements for determination of sound emission quantities
Road vehicles. Ignition coils. Electrical characteristics and test methods
Road vehicles. Hydraulic braking systems. Double-flare pipes, tapped holes, male fittings and tube seats
Banking. Secure cryptographic devices (retail). Concepts, requirements and evaluation methods
Banking. Secure cryptographic devices (retail). Security compliance checklists for devices used in magnetic stripe cards systems
Banking. Key management related data element (retail)
Petroleum and natural gas industries. Completion fluids and materials. Measurement of viscous properties of completion fluids
Paper and board. Specification for internal diameters of cores for reels
Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipment. Preconditioning
Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipment. Test method
Road vehicles. Localization of exhaust system leaks and equipment specifications
Industrial variable-reach trucks. Stability tests
Industrial variable-reach trucks. Additional stability tests for trucks handling freight containers of length 6m and above
Single side loading fork-lift trucks. Stablity tests
Centrifugally cast steel and alloy products. General testing and tolerances
Centrifugally cast steel and alloy products. Heat resistant materials
Industrial automation systems and integration. Parts library. Logical resource. Logical model of expressions
Industrial automation systems and integration. Parts library. Description methodology: Methodology for structuring part families
Plastics. Determination of fracture toughness (Gic and Kic). Linear elastic fracture mechanics (LEFM) approach
Small craft. Portable fuel systems for outboard motors
Small craft. Backfire flame control for petrol engines
Banking and related financial services. International bank account number (IBAN)
Ships and marine technology. Shipboard incinerators. Requirements
Petroleum and natural gas industries. Design and operation of subsea production systems. Subsea umbilicals
Petroleum and natural gas industries. Design and operation of subsea production systems. Design and operation of subsea controls
Petroleum and natural gas industries. Design and operation of subsea production systems. Remotely operated vehicle (ROV) interfaces on subsea production systems
Petroleum and natural gas industries. Design and operation of subsea production systems. Remotely operated tool (ROT) intervention systems
Building construction. Jointing products. Specifications for test substrates
Plastics. Epoxy resins and related materials. Determination of total saponifiable chlorine
Optics and optical instruments. General optical test methods. Measurement of relative irradiance in the image field
Graphic technology. Spectral measurement and colorimetric computation for graphic arts images
Graphic technology. Application of reflection densitometry and colorimetry to process control or evaluation of prints and proofs
Road vehicles. Test method for the quantification of on-centre handling. Weave test
Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing and line pipe
Petroleum and natural gas industries. Procedures for testing casing and tubing connections
Refrigerated light hydrocarbon fluids. Measurement of liquid levels in tanks containing liquefied gases. MicStandardave-type level gauge
Cereals, pulses and milled products. Sampling of static batches
Petroleum and natural gas industries. Calculation of heater-tube thickness in petroleum refineries
Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm. Accessory mounting dimensions
Lubricants, industrial oils and related products (class L). Family E (internal combustion engine oils). Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)
Crude petroleum and petroleum products. Transfer accountability. Assessment of vessel experience factor on loading (VEFL) and vessel experience factor on discharging (VEFD) of ocean-going tanker vessels
Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of residual monomers and other organic components by capillary-column gas chromatography. Direct liquid injection method
Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of residual monomers and other organic components by capillary-column gas chromatography. Headspace method
Textile floor coverings. Guidelines for installation and use on stairs
Air quality. Assessment of uncertainty of a measurement method under field conditions using a second method as reference
Determination of silver in silver jewellery alloys. Volumetric (potentiometric) method using sodium chloride or potassium chloride
Gas cylinders. Stamp marking
Forestry machinery. Portable chainsaws. Non-manually actuated chain brake performance
Rubber and plastics hoses for fuels for internal combustion engines. Method of test for flammability
Thermoplastic tubing and hoses for automotive use. Non-fuel applications
Thermoplastic tubing and hoses for automotive use. Petroleum-based fuel applications
Plain bearings. Quality assurance of thin-walled half bearings. Selective assembly of bearings to achieve a narStandard clearance range
Implants for surgery. Hydroxyapatite. Determination of coating adhesion strength
Ambient air. Determination of asbestos fibres. Indirect-transfer transmission electron microscopy method
Plastics. Verification of pendulum impact-testing machines. Charpy, Izod and tensile impact-testing
Vitreous and porcelain enamels for aluminium. Production of specimens for testing
Vitreous and porcelain enamels for aluminium. Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
Vitreous and porcelain enamels. Corrosion tests in closed systems
Vitreous and porcelain enamels. Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry
Paper, board and corrugated fibreboard. Description and calibration of compression testing equipment
Corrugated fibreboard. Determination of edgewise crush resistance. Waxed edge method
Petroleum and natural gas industries. Content and drafting of functional specifications
Petroleum and natural gas industries. Content and drafting of a technical specification
Animal and vegetable fats and oils. Determination of isolated trans isomers by infrared spectrometry
Hard coal and coke. Mechanical sampling. General introduction
Hard coal and coke. Mechanical sampling. Sampling from moving streams
Hard coal and coke. Mechanical sampling. Coal. Sampling from stationary lots
Hard coal and coke. Mechanical sampling. Coal. Preparation of test samples
Hard coal and coke. Mechanical sampling. Sampling from moving streams
Hard coal and coke. Mechanical sampling. Coke. Preparation of test samples
Hard coal and coke. Mechanical sampling. Methods for determining the precision of sampling, sample preparation and testing
Hard coal and coke. Mechanical sampling. Methods of testing for bias
Bonded abrasive products. Limit deviations and run-out tolerances
Polyethelene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
Air quality. Determination of ozone in ambient air. Ultraviolet photometric method
Clothing for protection against liquid chemicals. Determination of the resistance of protective clothing materials to penetration by liquids under pressure
Environmental management systems. General guidelines on principles, systems and supporting techniques
Environmental management. Environmental assessment of sites and organizations (EASO)
Environmental management. Vocabulary
Machine tools. Test conditions for wire electrical-discharge machines (wire EDM). Terminology and testing of the accuracy
Hydrometric determinations. Flow measurements in open channels using structures. Compound gauging structures
Neutron radiation protection shielding. Design principles and considerations for the choice of appropriate materials
Milk and milk products. Extraction methods for lipids and liposoluble compounds
Stationary source emissions. Determination of the volume flowrate of gas streams in ducts. Automated method
Metallic powders, excluding hardmetals. Method for testing copper-base infiltrating powders
Solid mineral fuels. Guidance on the sampling of coal seams
Petroleum and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
Surface chemical analysis. Secondary-ion mass spectrometry. Determination of boron atomic concentration in silicon using uniformly doped materials
Implants for surgery. Wear of total hip joint prostheses. Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
Implants for surgery. Wear of total hip joint prostheses. Methods of measurement
Implants for surgery. Wear of total knee joint prostheses. Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
Implants for surgery. Wear of total knee joint prostheses. Methods of measurement
Industrial automation systems. Concepts and rules for enterprise models
Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Vocabulary
Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Heating, ventilating and air-conditioning test method and performance
Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Determination of effect of solar heating
Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Air filter element test method
Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Pressurization system test method
Aerospace. Drives, internal, offset cruciform, ribbed. Metric series
Aerospace. Drives, internal, offset cruciform. Metric series
Aerospace. Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives. Metric series
Aerospace. Gauges, for internal offset cruciform ribbed or unribbed drives. Metric series
Aerospace. Drives, internal, cruciform. Metric series
Aerospace. Drivers, ribbed, for internal cruciform ribbed or unribbed drives. Metric series
Aerospace. Gauges, for internal cruciform ribbed or unribbed drives. Metric series
Space systems. Programme management. Product assurance
Aerospace series. Space systems. Electromagnetic compatibility requirements
Space systems. Launch-vehicle-to-spacecraft interfaces
Specification for industrial wire screens
Mineral and sapphire watch-glasses. Dimensions and tolerances
Mineral and sapphire watch-glasses. Assembly to the case by adhesive or using a gasket
Mineral and sapphire watch-glasses. Qualitative criteria and test methods
Canned evaporated milk. Determination of tin content. Method using graphite furnace atomic absorption spectrometry
Milk and dried milk. Determination of iodide content. Method using high performance liquid chromatography
Reciprocating internal combustion engines. Determination and method for the measurement of engine power. Additional requirements for exhaust emission tests in accordance with ISO 8178
Earth-moving machinery. Loaders and backhoe loaders. Calculation of rated operating capacity and test method for verifying calculated tipping load
Earth-moving machinery. Loaders and backhoe loaders. Test method for measuring breakout forces and lift capacity to maximum lift height
Tracheal tubes designed for laser surgery. Requirements for marking and accompanying information
Information and documentation. Requirements for binding of books, periodicals, serials and other paper documents for archive and library use. Methods and materials
Textile machinery and accessories. Harnesses for Jacquard weaving machines. Vocabulary
Soil quality. Pretreatment of samples for determination of organic contaminants
Road vehicles. Spark plugs. Terminals
Measurement of fluid flow in closed conduits. Thermal mass flowmeters
Passenger cars. Straight-ahead braking on surfaces with split coefficient of friction. Open-loop test method
Gaseous fire-extinguishing systems. Physical properties and system design. HCFC Blend A extinguishant
Gaseous fire-extinguishing systems. Physical properties and system design. HCFC Blend 124 extinguishant
Gaseous fire-extinguishing systems. Physical properties and system design. HCFC 125 extinguishant
Gaseous fire-extinguishing systems. Physical properties and system design. HFC 227ea extinguishant
Gaseous fire-extinguishing systems. Physical properties and system design. HFC 23 extinguishant
Gaseous fire-extinguishing systems. Physical properties and system design. HFC 236fa extinguishant
Gaseous fire-extinguishing systems. Physical properties and system design. IG-100 extinguishant
Gaseous fire-extinguishing systems. Physical properties and system design. IG-55 extinguishant
Gaseous fire-extinguishing systems. Physical properties and system design. IG-541 extinguishant
Gaseous fire-extinguishing systems. Physical properties and system design. General requirements
Gaseous fire-extinguishing systems. Physical properties and system design. CFDOWN3I extinguishant
Gaseous fire-extinguishing systems. Physical properties and system design. FC-2-1-8 extinguishant
Gaseous fire-extinguishing systems. Physical properties and system design. FC-3-1-10 extinguishant
Photography. Electronic still-picture cameras. Methods for measuring opto-electronic conversion functions (OECFs)
Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Pipes
Natural gas. Vocabulary
Photography. Room-light loading packages for electronic scanners and image-setting film and paper rolls. Dimensions and related requirements
Photography. Aerial films and spools. Dimensions
Water quality. Evaluation of the aerobic biodegradability of organic compounds at low concentrations. Shake-flask batch test with surface water or surface water/sediment suspensions
Water quality. Evaluation of the aerobic biodegradability of organic compounds at low concentrations. Continuous flow river model with attached biomass
Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials
Adhesives. Durability of structural adhesive joints. Exposure to humidity and temperature under load
Plastics. Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures. Determination of the shrinkage stress and contraction stress
Space systems. Space experiments. General requirements
Space systems. Electrical, electronic and electromechanical (EEE) parts. Control programme requirements
Space systems. Pressure vessels and pressurized structures. Design and operation
Space systems. Safety and compatibility of materials. Determination of flammability of electrical-wire insulation and accessory materials
Space systems. Safety and compatibility of materials. Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments
Gears. FZG test procedures. FZG test method A/8, 3/90 for relative scruffing load-carrying capacity of oils
Metallic coatings. Determination of porosity on gold coatings on metallic substrates. Nitric acid vapour test
Micrographics. Quality control of COM recorders that generate images using a single internal display system. Characteristics of the software test target
Micrographics. Quality control of COM recorders that generate images using a single internal display system. Method of use
Epoxy-coated steel for the reinforcement of concrete
Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements
Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials. Designation system and basis for specifications
Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials. Preparation of test specimens and determination of properties
Diesel engines. Fuel injection pump testing. Calibrating fuel injectors
Hydrometric determinations. Pumping tests for water wells. Considerations and guidelines for design, performance and use
Fans for general purposes. Method of measurement of fan vibration
Surface chemical analysis. Determination of surface elemental contamination on silicon wafers by total-reflection X-ray flourescence (TXRF) spectroscopy
Essential oils and aromatic extracts. Determination of residual benzene content
Space data and information transfer systems. Open archival information systems. Reference model
Forestry machinery. Backpack power units for brush cutters, grass trimmers, pole cutters and similar appliances. Safety requirements and testing
Road vehicles. Heavy commercial vehicles and buses. Steady-state circular tests
Road vehicles. Heavy commercial vehicles and buses. Lateral transient response test methods
Heavy commercial vehicles and buses. Braking in a turn. Open-loop test methods
Photography. Transmission and reflection densitometers. Method for determining performance
Photography. Composition of 135-film canisters
Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings. Vocabulary
Plastics. Unsaturated-polyester resins. Determination of reactivity at 130°C
Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Indophenol method
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by measuring the oxygen demand in a closed respirometer
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by analysis of evolved carbon dioxide
Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide
Timekeeping instruments. Wristwatch cases. Fixing dimensions of non-spring-bar types
Machinery for forestry. Portable hand-held brush cutters and grass trimmers with backpack mounted combustion engine power source. Safety requirements and testing
Soil quality. Dissolution for the determination of total element content. Dissolution by alkaline fusion
Implants for surgery. Total knee-joint prostheses. Determination of endurance properties of knee tibial trays
Microlens array. Vocabulary
Integrated optics. Interfaces. Parameters relevant to coupling properties
Sample preparation. Dispersing procedures for powders in liquids
Plastics. Polyols for use in the production of polyurethane. Determination of water content
Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specifications
Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Preparation of test specimens and determination of properties
Gas analysis. Conversion of gas mixture composition data
Implants for surgery. Two-part addition-cure silicone elastomers
Space systems. Fluid characteristics. Nitrogen
Space systems. Fluid characteristics. Helium
Space systems. Fluid characteristics. Nitrogen tetroxide propellant
Space systems. Fluid characteristics. Monomethylhydrazine propellant
Space systems. Fluid characteristics. Kerosene propellant
Space systems. Fluid characteristics. Ammonia
Space systems. Fluid characteristics. Carbon dioxide
Space systems. Fluid characteristics. Breathing air
Space systems. Surface cleanliness of fluid systems. Vocabulary
Space systems. Surface cleanliness of fluid systems. Cleanliness levels
Space systems. Surface cleanliness of fluid systems. Analytical procedures for the determination of nonvolatile residues and particulate contamination
Space systems. Surface cleanliness of fluid systems. Rough-cleaning processes
Space systems. Surface cleanliness of fluid systems. Drying processes
Space systems. Surface cleanliness of fluid systems. Precision-cleaning processes
Space systems. Structural design. Determination of loading levels for static qualification testing of launch vehicles
Space data and information transfer systems. Parameter value language specification
Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration
Ambient air. Determination of total non-methane organic compounds. Cryogenic preconcentration and direct flame ionization detection method
Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
Paper and board. Cut-size office paper. Measurement of curl in a pack of sheets
Sterile obturators for single use with over-needle peripheral intravascular catheters
Surface chemical analysis. Information formats
Surface chemical analysis. Data transfer format
Optics and optical instruments. Test methods for surface imperfections of optical elements
Anaesthetic and respiratory equipment. Compatibility with oxygen
Soil quality. Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons. Purge-and-trap method with thermal desorption
Disposable hanging devices for transfusion and infusion bottles. Requirements and test methods
Ships and marine technology. Guidelines for the assessment of speed and power performance by analysis of speed trial data
Securities. Scheme for messages (data field dictionary). Data field and message design rules and guidelines
Securities. Scheme for messages (data field dictionary). Maintenance of the data field dictionary and catalogue of messages
Plastics. Poly(vinyl alcohol) (PVAL) materials. Designation system and basis for specifications
Plastics. Poly(vinyl alcohol) (PVAL) materials. Determination of properties
Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, Gic, for unidirectionally reinforced materials
Protective clothing. Protection against heat and flame. Method of test for limited flame spread
Prostheses. Structural testing of hip joints
Plastics. Determination of caprolactam and its cyclic and linear oligomers by HPLC
Composites. Prepregs. Determination of resin flow
Road vehicles. Vehicle dynamics test methods. General conditions for passenger cars
Road vehicles. Vehicle dynamics test methods. General conditions for heavy vehicles and buses
Plastics. Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials. Determination of active-oxygen content
Composites. Prepregs. Determination of gel time
Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A
Machinery for forestry. Log loaders. Location and method of operation of two-lever operator controls
Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systems. Hydraulic fluid power. Determination of the fluid borne noise characteristics of components and systems. Introduction
Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systems. Measurement of speed of sound in a fluid in a pipe
Plastics. Reinforcement fibres. Chopped strands. Determination of bulk density
Plastics. Film and sheeting. Determination of gas-transmission rate. Differential-pressure method
Plastics. Film and sheeting. Determination of gas-transmission rate. Equal-pressure method
Rubber. Determination of frictional properties
Implants for surgery. Metal intramedullary nailing systems. Intramedullary nails
Implants for surgery. Metal intramedullary nailing systems. Locking components
Implants for surgery. Metal intramedullary nailing systems. Connection devices and reamer diameter measurements
Guidelines on the application of ISO 9001:2000 for the food and drink industry
Adhesives. Methods of preparing bulk specimens. Two-part systems
Adhesives. Methods of preparing bulk specimens. Elevated-temperature-curing one-part systems
Petroleum and liquid petroleum products. Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes. Coupling not for connection under pressure
Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes. Coupling with M16 x 2 end for connection under pressure
Soil quality. Characterization of excavated soil and other soil materials intended for re-use
Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity. Field measurements
Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity. Laboratory measurements at low frequencies
Project management guidelines for terminology standardization
Medical laboratories. Requirements for safety
Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling
Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of sulfite-reducing bacteria gStandarding under anaerobic conditions
Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of mesophilic lactic acid bacteria. Colony-count technique at 30°C
Fluid power systems and components. 16mm square electrical connector with earth contact. Characteristics and requirements
Pneumatic fluid power. 3/2 solenoid valves. Mounting interface surfaces
Optics and optical instruments. Microscopes. Testing of stereomicroscopes
Solid mineral fuels. Determination of total mercury content of coal
Solid mineral fuels. Determination of total cadmium content of coal
Rolling bearings. Symbols for quantities
Animal and vegetable fats and oils. Detection and identification of a volatile organic contaminent by GC/MS
Reinforced plastics. Determination of the in-plane shear modulus by the plate twist method
Rolling bearings. Thermal speed rating. Calculation and coefficients
Recycled pulps. Estimation of visible contraries by instrumental means using reflected light
Dried milk protein products. Determination of nitrogen solubility index
Corrosion of metals and alloys. Evaluation of stress corrosion cracking by the drop evaporation test
Pipework. Metal bellows expansion joints. General
Steel and iron. Determination of total carbon and sulfur content. Infrared absorption method after combustion in an induction furnace (routine method)
Paper and board. Determination of the static and kinetic coefficients of friction. Horizontal plane method
Recycled pulps. Estimation of stickies and plastics. Visual method
Pulps. Determination of zero-span tensile strength, wet or dry
Optics and optical instruments. Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
Ships and marine technology. Fire-extinguishing systems for protection of galley deep-fat cooking equipment. Fire tests
Ships and marine technology. Inflatable rescue boats. Coated fabrics for inflatable chambers
Plastics. Polymer dispersions. Determination of free formaldehyde
Implants for surgery. Requirements for production of forgings
Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HETG, HEPG, HEES and HEPR
Space systems. Flight-to-ground umbilicals
Packaging. Bar code and two-dimensional symbols for shipping, transport and receiving labels
Ships and marine technology. Bulk carriers. Construction quality of hull structure
Ships and marine technology. Bulk carriers. Repair quality of hull structure
Natural gas. Designation of the quality of natural gas for use as a compressed fuel for vehicles
Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm. Mounting interface surfaces without electrical connector
Surface chemical analysis. X-ray photoelectron spectrometers. Calibration of energy scales
Information and documentation. Records management. General
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for tensile strength of monolithic ceramics at room temperature
Adhesives. Determination of the bond strength of engineering-plastic joints
Information and documentation. International Standard Identifier for Libraries and Related Organizations (ISIL)
Cranes. Competency requirements for crane drivers (operators), slingers, signallers and assessors
Optics and optical instruments. Optical transfer function. Principles of measurement of modular transfer function (MTF) of sampled imaging systems
Petroleum and natural gas industries. Offshore production installations. Requirements and guidelines for emergency response
Internal combustion engines. Determination and method for the measurement of engine power. General requirements
Practice for dosimetry in gamma irradiation facilities for food processing
Practice for use of a ceric-cerous sulfate dosimetry system
Guide for selection and calibration of dosimetry systems for radiation processing
Practice for use of a radiochromic film dosimetry system
Practice for use of a polymethylmethacrylate dosimetry system
Practice for use of a radiochromic optical waveguide dosimetry system
Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory
Practice for use of a dichromate dosimetry system
Practice for dosimetry in electron and bremsstrahlung irradiation facilities for food processing
Practice for use of the ethanol-chlorobenzene dosimetry system
Guide for use of radiation-sensitive indicators
Practice for use of a radiochromic liquid dosimetry system
Practice for use of the alanine-EPR dosimetry system
Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing
Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
Practice for dosimetry in an electron-beam facility for radiation processing at energies between 300 keV and 25 MeV
Practice for use of cellulose acetate dosimetry system
Practice for dosimetry in a gamma irradiation facility for radiation processing
Guide for estimating uncertainties in dosimetry for radiation processing
Practice for dosimetry in an electron-beam facility for radiation processing at energies between 80 keV and 300 keV
Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis. Sampling
Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis. Atmosphere for conditioning and testing
Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis. Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and ni
Environmental tobacco smoke. Estimation of its contribution to respirable suspended particles. Determination of particulate matter by ultraviolet absorbance and by fluorescence
Tools for moulding. Thermal insulating sheets for injection moulds
Urine-absorbing aids. General guidance on evaluation
Pallets for materials handling. Quality of fasteners for assembly of new and repair of used, flat, wooden pallets
Microbeam analysis. Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors
Coated abrasives. Flap discs
Holding fixtures of cylindrical abrasive sleeves. Holding fixtures with shank for hand-held grinding machines
Holding fixtures of cylindrical abrasive sleeves. Holding fixtures for stationary machines
Road construction and maintenance equipment. Bituminous binder spreaders/sprayers. Terminology and commercial specifications
Road construction and maintenance equipment. Chippings spreaders. Terminology and commercial specifications
Road construction and maintenance equipment. Road milling machinery. Terminology and commercial specifications
Petroleum and natural gas industries. Life cycle costing. Methodology
Petroleum and natural gas industries. Life cycle costing. Guidance on application of methodology and calculation methods
Petroleum and natural gas industries. Life cycle costing. Implementation guidelines
Acoustics. Noise control design procedures for open plant
Acoustics. Acoustic insulation for pipes, valves and flanges
Banking. Secure file transfer (retail)
Rubber and rubber additives. Determination of total nitrogen content using an automatic analyser
Cardiovascular implants and artificial organs. Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags
Cardiovascular implants and artificial organs. Cardiopulmonary bypass systems. Arterial line blood filters
Water quality. Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA). Method by flow injection analysis (FIA)
Water quality. Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA). Method by continuous flow analysis (CFA)
Buildings and constructed assets. Service life planning. General principles
Buildings and constructed assets. Service life planning. Service life prediction procedures
Buildings and constructed assets. Service life planning. Performance audits and reviews
Water quality. Determination of the chemical oxygen demand index (ST-COD). Small-scale sealed-tube method
Information and documentation. International Standard Audiovisual Number (ISAN)
Information and documentation. International standard musical work code (ISWC)
Paints and varnishes. Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution
Binders for paints and varnishes. Determination of turbidity
Metallic and other inorganic coatings. Electrochemical measurement of diffusible hydrogen in steels. Barnacle electrode method
Ships and marine technology. Hydrostatic release units
Ships and marine technology. Gas inflation systems for inflatable life-saving appliances
Photography. Electronic still-picture imaging. Noise measurements
Paints and varnishes. Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
Packaging. Steel drums. Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l
Packaging. Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 121 l, 216,5 l and 230 l
Packaging. Steel drums. Inserted flange-type closure systems
Workplace atmospheres. Controlling and characterizing errors in weighing collected aerosols
Plastics. Development and use of intermediate-scale fire tests for plastics products. General guidance
Bi-directional and multi-directional fork-lift trucks. Stability tests
Optics and optical instruments. Quality evaluation of optical systems. Assessing the image quality degradation due to chromatic aberrations
Textiles. Industrial washing and finishing procedures for testing of workwear
Soil quality. Guidance on the ecotoxicological characterization of soils and soil materials
Information and documentation. The Dublin Core metadata element set
Water quality. On-line sensors/analysing equipment for water. Specifications and performance tests
Ships and marine technology. Guidelines for implementation of a fleet management system network
Plastics. Determination of tension-tension fatigue crack propagation. Linear elastic fracture mechanics (LEFM) approach
Powered industrial trucks. Safety signs and hazard pictorials. General principles
Industrial trucks. Specification for indicator lights for container handling and grappler arm operations
Aerospace. UNJ threads. Gauging
Milk fat. Preparation of fatty acid methyl esters
Space data and information transfer systems. Data description language. EAST specification
Soil quality. Format for recording soil and site information
Animal feeding stuffs. Enzymatic determination of total starch content
Graphic technology. Prepress digital data exchange. Guidelines and principles for the development of PDF/X standards
Graphic technology. Prepress digital data exchange. Use of PDF. Complete exchange using CMYK data (PDF/X-1) and PDF/X-1a)
Plastics. Film and sheeting. Biaxially oriented polyamide (nylon) films
Plastics. Film and sheeting. Biaxially oriented poly(ethylene terephthalate) (PET) films
Indoor air. Determination of formaldehyde and other carbonyl compounds. Active sampling method
Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. General principles
Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Universal calibration method
Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. High-temperature method
Technical product documentation. Protection notices for restricting the use of documents and products
Hydraulic fluid power. Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar). Specifications
Pneumatic fluid power. Connections. Ports and stud ends
Animal and vegetable fats and oils. Determination of low-boiling halogenated hydrocarbons in edible oils
Air cargo equipment. Restraint straps. Design criteria and testing methods
Coated abrasives. Vulcanized fibre discs
Methods for the calibration of vibration and shock transducers. Basic concepts
Methods for the calibration of vibration and shock transducers. Primary vibration calibration by laser interferometry
Methods for the calibration of vibration and shock transducers. Primary vibration calibration by the reciprocity method
Methods for the calibration of vibration and shock transducers. Primary shock calibration using laser interferometry
Methods for the calibration of vibration and shock transducers. Vibration calibration by comparison to a reference transducer
Pulps. Determination of fibre length by automated optical analysis. Polarized light method
Soil quality. Laboratory methods for determination of microbial soil respiration
Workplace atmospheres. Protocol for evaluating the performance of diffusive samplers
Machine-tools safety. Safety requirements for the design and construction of work holding chucks
Ships and marine technology. Marine environment protection. Terminology relating to oil spill response
Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
Water Quality. Guidance for determination of biodegradability in the marine environment
Tools for pressing. L-shaped guides
Tools for pressing. Guide plates. U- and V-blocks
Mobile elevating work platforms. Design calculations, safety requirements and test methods
Soil quality. Effects of pollutants on Enchytraeidae (Enchytraeus sp.). Determination of effects on reproduction and survival
Ships and marine technology. Marine environmental protection. Adaptor for joining dissimilar boom connectors
Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Nominal dimensions and tolerances
Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Vocabulary
Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Storage, handling and installation
Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Performance test procedures
Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Identification of visual imperfections
Banking. Requirements for message authentication using symmetric techniques
Computer applications in terminology. Terminological markup framework
Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of ?-glucuronidase-positive Escherichia coli. Colony-count technique at 44°C using membranes and 5-bromo-4- chloro-3-indolyl-?-D-glucuronide
Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of ?-glucuronidase-positive Escherichia coli. Colony-count technique at 44°C using 5-bromo-4-chloro-3-indolyl-?-D-glucuronide
Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
Workplace air quality. Determination of total isocyanate groups in air using 2-(1-methoxyphenyl) piperazine and liquid chromatography
Plastics. Determination of environmental stress cracking (ESC) of polyethylene. Full-notch creep test (FNCT)
Paints and varnishes. Evaluation of sag resistance
Plastics. Assessment of the effectiveness of fungistatic compounds in plastics formulations
Hydraulic fluid power. Pressure switches. Mounting surfaces
Hydraulic fluid power filters. Multi-pass method for evaluating filtration performance of a filter element
Hydraulic fluid power. Test code for the determination of sound power levels using sound intensity techniques. Engineering method. Pumps
Tools for moulding. Sprue pullers
Plastics. Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
Soil quality. Determination of abundance and activity of soil microflora using respiration curves
Erythema reference action spectrum and standard erythema dose
Textiles. Determination of twist in single spun yarns. Untwist/retwist method
Cinematography. Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives. Position and width dimensions
Passenger cars. Free-steer behaviour. Steering-release open-loop test method
Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS). Determination of 62 elements
Ships and marine technology. Sea anchors for survival craft and rescue boats
Ships and marine technology. High-pressure floating pneumatic rubber fenders
Condition monitoring and diagnostics of machines. General guidelines
Water quality. Selection and application of ready-to-use test kit methods in water analysis
Space systems. Man-systems integration
Plastics. Environmental aspects. General guidelines for their inclusion in standards
Space data and information transfer systems. Packet telemetry services
Clothing and equipment for protection against heat. Test method for convective heat resistance using a hot air circulating oven
Photography. Processing chemicals. Specifications for 4-(N-ethyl-N-2- methanesulfonylaminoethyl)-2-methylphenylenediamine sesquisulfate monohydrate
Plastics. Film and sheeting. Biaxially oriented polypropylene (PP) films
Plastics. Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
Plastics. Film and sheeting. Cast polypropylene (PP) films
Surface chemical analysis. Secondary-ion mass spectrometry. Method for depth profiling of boron in silicon
Nitrile rubber. Determination of residual unsaturation in hydrogenated nitrile rubber (HNBR) by iodine value
Microbiology of food and animal feeding stuffs. Carcass sampling for microbiological analysis
Ships and marine technology. Shipboard plans for fire protection, life-saving appliances and means of escape
Plastics. Polyols for use in the production of polyurethane. Determination of degree of unsaturation by microtitration
Graphical symbols. Vocabulary
Plastics. Thermoset moulding compounds. Determination of the degree of fibre wetting in SMC
Agricultural trailers. Balanced and semi-mounted trailers. Determination of payload, vertical static load and axle load
Surface chemical analysis. Medium-resolution Auger electron spectrometers. Calibration of energy scales for elemental analysis
Surface chemical analysis. High-resolution Auger electron spectrometers. Calibration of energy scales for elemental and chemical-state analysis
Thermoplastic elastomers. Nomenclature and abbreviated terms
Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
Surface chemical analysis. Vocabulary
Petroleum and natural gas industries. Performance testing of cementing float equipment
Pallets for materials handling. Quality of new wooden components for flat pallets
Pallets for materials handling. Quality of assembly of new, wooden, flat pallets
Hydraulic fluid power. Cleanliness of parts and components. Inspection document and principles related to contaminant collection, analysis and data reporting
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
Conveyor belts. Test atmospheres and conditioning periods
Gears. Evaluation of instruments for the measurement of individual gears
Lifts (elevators). Measurement of lift ride quality
Imaging materials. Processed silver-gelatin type black-and-white film. Specifications for stability
Imaging materials. Processed photographic films, plates and papers. Filing enclosures and storage containers
Imaging materials. Films and paper. Determination of dimensional change
Imaging materials. Processed films. Method for determining lubrication
Imaging materials. Ammonia-processed diazo photographic film. Specifications for stability
Imaging materials. Photographic films. Specifications for safety film
Imaging materials. Photographic films and papers. Wedge test for brittleness
Imaging materials. Photographic film. Determination of folding endurance
Imaging materials. Photographic film and paper. Determination of curl
Photography. Processed safety photographic films. Storage practices
Imaging materials. Processed vesicular photographic film. Specifications for stability
Imaging materials. Photographic film and papers. Method for determining the resistance of photographic emulsions to wet abrasion
Imaging materials. Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation
Photography. Determination of residual thiosulfate and other related chemicals in processed photographic materials. Methods using iodine-amylose, methylene blue and silver sulfide
Imaging materials. Processed photographic plates. Storage practices
Photography. Thermally processed silver microfilm. Specifications for stability
Imaging materials. Processed photographic reflection prints. Storage practices
Imaging materials. Compact discs (CD-ROM). Method for estimating the life expectancy based on the effects of temperature and relative humidity
Imaging materials. Processed photographic films. Methods for determining scratch resistance
Imaging materials. Polyester-base magnetic tape. Storage practices
Imaging materials. Test methods for Arrhenius type predictions
Imaging materials. Optical disk media. Storage practices
Imaging materials. Recordable compact disc systems. Method for estimating the life expectancy based on the effects of temperature and relative humidity
Imaging materials. Unprocessed photographic films and papers. Storage practices
Imaging materials. Wet-processed silver-gelatin type black-and-white photographic reflection prints. Specifications for dark storage
Geographic information. Reference model
Geographic information. Conformance and testing
Geographic information. Spatial schema
Geographic information. Temporal schema
Geographic information. Spatial referencing by coordinates
Geographic information. Spatial referencing by geographic identifiers
Geographic information. Quality principles
Lubricants, industrial oils and related products (class L). Machine-tool lubricants. Categories and specifications
Ships and marine technology. ECS databases. Content, quality, updating and testing
Diesel fuel and petrol filters for internal combustion engines. Filtration efficiency using particle counting and contaminant retention capacity
Surface chemical analysis. Secondary-ion mass spectrometry. Method for estimating depth resolution parameters with multiple delta-layer reference materials
Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of light transmittance of ceramic films with transparent substrate
Oil of dwarf pine (Pinus mugo Turra)
Fine-cut tobacco and smoking articles made from it. Survey and analysis of consumer-made articles
Space data and information transfer systems. Data entity dictionary specification language (DEDSL). Abstract syntax
Aerospace series. Space data and information transfer systems. Data entity dictionary specification language (DEDSL). PVL syntax
Crop protection equipment. Test methods for the evaluation of cleaning systems. Internal cleaning of complete sprayers
Crop protection equipment. Test methods for the evaluation of cleaning systems. External cleaning of sprayers
Crop protection equipment. Test methods for the evaluation of cleaning systems. Internal cleaning of tank
Road vehicles. Recyclability and recoverability. Calculation method
Space data and information transfer systems. Data entity dictionary specification language (DEDSL). XML/DTD Syntax
Utility lighters. General consumer-safety requirements
Rubber, vulcanized or thermoplastic. Abrasion testing. Guidance
Cardiovascular implants. Endovascular devices. Endovascular prostheses
